Видео

Grant GT Ralley 13"

Theyre a liability more than a bargain. The toyota perches are too small to fit properly and can result in cracking or total failure of the block structure. I personally had it happen on a truck on a freeway and from there out i ONLY use steel blocks designed with flat perches for proper contact.

I removed the bulb from the cluster. I chose to not do the resistor mod as it can possibly trigger the passenger side if it goes out. I keep the passenger side turned off with the key.

Thanks for the very clear and detailed video; especially liked including the part numbers! Regarding the airbag light…I appreciate not wanting to trigger the passenger airbag, however leaving the airbag wires disconnected is essentially the same thing as a failed resistor, isn’t it? I did a similar aftermarket wheel installation on a NA Miata using a 3ohm 1 watt fireproof ceramic resistor…those things last for decades in far more stressful circuits in guitar amplifiers. Your thoughts?

@@brakescooper I'm glad it's helped some people out!

@@brakescooper regarding the wires, one is a power, the other is a signal/ground wire. I left them in the connector so neither will ever make contact. The signal or trigger wire cones from the sensors located at the front of the truck (in yellow harness and casing). Yes it will trigger a light warning about the issue but will not trigger nor affect the passenger bag.

Thank you!

18x9 370Z wheels

The one with the intake being done is current.

I also heard and seen more power out of the stock box. The meager loss in power however dont make up in the smiles department when she starts to scream though! I didnt notice per say on the butt dyno so im ok with it. I have heard of the haltech gains and are pretty incredible. Unfortunately imdo live in cali where the mod could cost me heavily if im caught with it. As it sits, my truck for the most part is "compliant" with most of the parts having valid carb certs.

@@alisn4x4 mannnn I’m sorry to hear that I live in Georgia where I don’t even have to have emissions I’ll be running the haltech ecu with a 2.2 pulley, stock injectors and fmu from SNP speed innovations the same people who make the haltech ecu I was gonna run the 7th injector but it’s not worth it compared to the haltech

@@cullenwhite4005 i have the 2.2 pulley with the walbro 225 pump, 315cc blue tops, trd headers, 2.5" header back exhaust with magnaflow mufflers, lce 12lb flywheel, and the afe intake. This thing rips for how restricted the motor still is under the stock ecu.

​@@alisn4x4 do you think its safe to run the high boost pulley with the stock ecu? any issues with it?

@@angvlo598 I've been running the 2.2 URD Pulley with no issues, I've never heard the motor knock at all. Was running strong for 2 years and I just had the knock sensor codes go on one at a time so it's time to get em done.

2" drop spindles up front, my custom qa1 coilover conversion kit, chassistech (discontinued ) 3" drop leafs, 4" steel lowering blocks, and a under bed c-notch

@@alisn4x4 Thanks! Trying to find a nice drop kit is hard to come by. Lol.

@@pshizznit i try and keep the local tacoma community supplied with whats needed. You can look me up on IG @sdyota or FB under SD Yota Garage.

Guy from Seattle called "All Be Clear Custom Lenses" (Logan)

Depo headlights from ebay

What’s the tire size on those rims?

Wheels are 18x9 370z rear wheels all around.

Sorry, tire size is 225/40/18 firehawks

@@alisn4x4 are you running any spacers ?

Thank you!

Yes, same adapter.

No, its not required to run the wheel.

Everything is for sale for the right price. ...

Tag me when you do. I'd like to hear that!

@@alisn4x4 dude you need to supercharge this thing

@@cullenwhite4005 its been supercharged since this video. Lol

@@alisn4x4 good I haven’t checked that out I will now

@@cullenwhite4005 he is on instagram as well as Facebook

I did not. Centers were bored out.

Rear square set of wheels off a 370Z. 18x9's

370Z 18x9 rears (square)

Yes, took it off another truck and soldered it on the lead wire that controls the horn.

and as far as the clip? where can i find one of those ? i see the pin PN but i cant find the clip anywhere @@alisn4x4

Glad it helped!

Thanks brother! I love my SR!