![Aaron's Yard](/img/default-banner.jpg)
- Видео 75
- Просмотров 272 207
Aaron's Yard
США
Добавлен 19 ноя 2019
Do you like to watch trees being cut up, milled into lumber, and split into firewood? How bout land clearing, construction ,backhoes and dozers? come check it out and please subscribe like and share my exciting videos! Thanks
Wood Yard Tour ! New Machine
Come along with me as I show you the wood yard here at Aaron’s yard! Firewood sales are up! Profit reinvested! New machine on the way! Can you guess what it is? Leave a comment, ask a question and please Subscribe with a big thumbs up!
Просмотров: 101
Видео
Hudson HFE30 Sawmill Ugly logs
Просмотров 1,2 тыс.7 месяцев назад
The start of Aarons yard is the Hudson hfe30 sawmill. Watch as this beast rips though some ugly tulip poplar logs. Please subscribe to never miss upcoming new content.
Husqvarna 395xp noodling logs for premium firewood!
Просмотров 319Год назад
Husqvarna 395xp ! One of the best chainsaw on the market tears through huge red oak logs. Check how fast they are noodled!
Dozer stump work John Deere 350
Просмотров 24 тыс.Год назад
Today I am going to put the 1972 John Deere 350 B dozer to work. Watch how powerful this little machine is. Thanks for watching and please subscribe!
LARGE TREE TAKE DOWN
Просмотров 205Год назад
The time has finally come where the large red oaks in my driveway will be taken down. Nice little time lapse video for your viewing pleasure. Thanks for watching and please subscribe for more spectacular content!
Sawmill slab wood as kindling?
Просмотров 620Год назад
This is going to be a new business venture for me selling the slab wood by product from logs which comes off my sawmill. I plan to split them down smaller to sell as kindling. Check it out and don’t forget to subscribe!
White oak rot resistant beams
Просмотров 418Год назад
Welcome back to my channel! In this video I am sawing three white oak logs into 4x6 beams for the base of a shed I plan to build. Stay till the end to see how nice they came out. Thanks and don’t forget to subscribe!
I think I maxed out my Sawmill!
Просмотров 467Год назад
Watch as I max out my hfe30 Hudson sawmill with this beautiful red oak! The grain is amazing!
RUGGEDMADE log tongs put to the test!
Просмотров 7 тыс.2 года назад
In this adventure at the wood yard I am going to test out my new set of duel log tongs made by rugged made. They seem heavy duty but we will find out if they can lift these massive red oak logs. How much do you think these 12’ red oaks weigh? Please comment! Don’t forget to subscribe to my growing you tube channel!
Hudson HFE30 sawmill making beautiful slabs
Просмотров 6222 года назад
The Sawmill is ready to produce BEAUTIFUL slabs this year. In this video I will be sawing a red oak, spalted maple and a black walnut. I use a Hudson HFE30 . This will be my second year using this saw . I plan to do a review so stay tuned by subscribing. Thanks Aaron’s yard
How I process BIG firewood rounds!
Просмотров 1,9 тыс.2 года назад
Welcome back everyone! I love when my tree service guy delivers me massive firewood rounds! My body doesn’t tho! Check out how I go about processing these big rounds into manageable splitting size. Please don’t forget to subscribe!
Roadside firewood stand and hand splitting Oak
Просмотров 6452 года назад
Take a tour of my firewood stand I have on a very busy road. Sales are through the roof and I need to split more. I put the fiskars x27 splitting axe to the test. Please subscribe and like
Husqvarna Big log slayer 395xp #shorts
Просмотров 1942 года назад
Husqvarna Big log slayer 395xp #shorts
Stand Up And Buck! Is this the best way?
Просмотров 7372 года назад
Stand Up And Buck! Is this the best way?
How To Remove a Dent with glue sticks
Просмотров 15 тыс.3 года назад
How To Remove a Dent with glue sticks
My Chainsaws and 500 Subscriber Giveaway
Просмотров 2213 года назад
My Chainsaws and 500 Subscriber Giveaway
Making my own lumber! Hudson HFE 30!Mill with Me!
Просмотров 1,5 тыс.3 года назад
Making my own lumber! Hudson HFE 30!Mill with Me!
HUGE tree service wood! Wood yard tour
Просмотров 3333 года назад
HUGE tree service wood! Wood yard tour
First time sawmill use! Hudson homesteader HFE 30
Просмотров 16 тыс.3 года назад
First time sawmill use! Hudson homesteader HFE 30
Best sawmill base build #hudson#hudsonHFE30
Просмотров 3,6 тыс.3 года назад
Best sawmill base build #hudson#hudsonHFE30
Bobcat??
Great guess! Maybe!
How can I contact you in regards to buying some wood ?
I’m sorry but the best part about having a road side stand is I don’t have to contact people and they don’t have to contact me. Honor system works well where I am
@@Aaronzap15 sorry should have been more specific im interested in buying some sawmill wood like a live edge slab ! If that’s something your interested in I’d love to chat !
Thanks for the inspiration! I have a JD210C and just got the Vevor 3300lb tongs. Its impressive how much work you're doing and the JD makes it look effortless!!
Thanks! Ya if I didn’t have the 410 don’t know how I would move big logs. Definitely a back saver!
That fridge shelving works great for the small stuff. You could have linked the chain link section to the other section and increased the pitch with a smaller middle section. Great concept for a system though!
The shelves do work well. The chain link fence didn’t. I plan to make more of a Grizzly bar setup for the smaller rock
THANK YOU FOR THIS!!!!! Awesome video buddy. I punched my car the other day because I didn’t want to make contact with some a holes face and have a dent. You said you used rubbing alcohol to get the residue off? Jave a great day man. Be safe be well
No prob! I did use rubbing alcohol might take a little bit to rub it out but good ole glue sticks definitely work. Thanks for watching
What is the grating size for the topsoil part
The spacing on the racks are 1/2 inch it’s a nice fine screed .
Approximately how many logs per bundle
Those were bigger bundles which I was selling for 8$ each. Probably 12-15 small pieces. Now I sell them for 5$ with 8-10 pieces little bit smaller. They sell like crazy for 5$
I think i sae leveling feet .Where did you buy those?
They are levelers for the rail. They are bolted to 12” steel beams. I made them from 3/4 threaded Rod. I used a friends mag drill to make the holes perfectly in line
I got to get me one of those. Yours is the nicest one I’ve seen, I’m looking to buy one any recommendations, what I need to look at, I’m a total Novice have a backhoe loader experience and that’s it. Thank You for sharing your experience I want that same model.
It’s a nice little machine. She’s a 72’ that was restored nicely. Easy to drive. The steering clutches are an important thing to make sure they work
Sharp blades are everything. Saves on time , petrol and machines . I've made this mistake myself . Nothing like new or sharp blades .
Oh ya most definitely
Looks like the stone is moving too fast by the time it hits the chain link. May have to do the gravel collection as a second process after separating the dirt
That’s a great idea. The chain just sags with the weight tho. I plan to put angle iron and pipe instead of the fence
Video starts at 1:20
Just got an 86 350 wide track, but with narrow tracks mounted. One clutch needs attention, but otherwise solid including winch.
Very nice! Lots of power in a small package!
Hey Aaron how does that 2wd Deere do in the mud and difficult terrain? I wanted to know just how much you need 4wd
My property is pretty flat and dry but it does slide in the mud. 4wd would be nice tho
The angle must ensure the rocks roll down. The idea of the grizzly bar setup will definitely work well. Keep us updated.
It should work better if I increase the angle and use either pipe or angle iron fence was definitely a bust! Never know till you try . I plan on working on it soon almost have enough scrap metal I have found. Thanks for watching!
If you strengthend the frame maybe with some steel you could just push it up and over every so often to clear it. Or a set of sliders set in for toes on the loader to mover it every so often. Geat invention tho.
Thanks for the tip!
Think you need bigger rods and hook it up to 220 😊
I think you came up with a great start for an efficient screening system. I'm no expert, in fact I'm watching this to learn from you so take my thoughts about it with a grain of salt. First thing is I think a steeper angle would help remedy the larger rocks piling up. Second thing is if the chain link didn't behave like a metal fishing net it would be close to perfect. Maybe if you had a way to make the center of the fence bulge upwards with a pole or post pushing upward. Think of the rocks as water. Right now the screen is acting like a bowl but it would be beneficial to act like an umbrella. That would probably be worth a try for simplicity's sake as opposed to a major redesign. Either way thanks for the video and the inspiration to try it myself in the future.
Thanks for watching! There is always room for improvement. I plan to put steel angle instead of the fence. Should work better
Almost need a second one for the rocks. Find a similar heavy grating with larger holes. Awesome job though. I like it
The smaller one is intended for rock but the fence kept bowing from the weight. I plan to put angle iron instead so I can screen 2” and smaller rock. Thanks for watching
Longer and steeper, for sure
Ya you are probably right but the fence definitely didn’t work. I plan to put angle iron instead of the fence so the big rocks will roll off better
You should drain the fuel tank too. Probably lots of water and stuff that will contaminate your filter and lines again soon
I did drain the fuel after I did the video and not too many contaminants which I was surprised. I strained the fuel little bit of slime but after I had the injector pump rebuilt never had a problem since. Thanks for watching and commenting!
I’m currently trying to build one myself! Never even thought of using wood! ✅✅✅ Good work there ! Just like the rest of the comments are saying “use it until it needs maintenance “
When I built it 4x6 was cheaper than steel. Soil screener works great but the rock separator needs improvement. Need to put angle iron across instead of the chain fencing. Thanks for watching!
Got that thing plucked out and filled, nice work bud . Thanks for showing. Catch ya again Aaron
Thanks for watching Richy! Always fun time using the backhoe!
Pretty sure it's ash, those squiggly marks on outside are ash borer beetle marks. But I could be wrong, wouldn't be the first time lol...
I think you might be right also. The 5 logs were dropped off a while ago and from the same property. If it’s ash then it’s cash.
Taking the supply line off and bleeding it there is unnecessary. You got more air in there taking it apart then you did leaving it alone. Just bleed it at the filter and done
It’s actually the return line. There is a check valve which gets clogged because of a seal failure in the injection pump
@@Aaronzap15 no I'm talking about in the beginning when you change the filter. You only need to crack the bolt at the top of the filter housing and pump the air out there
Got it. I wasn’t sure if I had to do both
Are you still selling bundles
In the winter it is much slower sell 4-6 a week. The spring and fall are very profitable times I can sell 20-30 per week
I have literally never seen a 4 in 1 style backhoe attachment bucket. Someone that knows more please enlighten me 😅
It’s a wain Roy jaw bucket. It came factory ordered on that machine in 1983. Has a for control on the left side to operate it. I use it all the time
Im trying this tonight. Thanks for the video
Awesome hope it works for you! Thanks for watching!
It's working fine for what it is. Tweak it until meets your needs. Good video! Thanks!
Thanks for watching!
TITAN Attachments Pallet Forks on John Deere 410 backhoe
This is andrew aka andy and I'm still trying to searching for another backhoe for our property but I'm unable to finding the right sized backhoe for our property but I'm unsuccessful with finding the same identical backhoe as yours. So anyways could you'd please seeing if you're able to please giving me the serial number of your backhoe and the model number of it
It’s an 83’ the numbers are worn off. There are many the same size but might not have the jaw bucket attachment
I put you on Facebook so hopefully more people watch your videos.
Thanks!
Thank you
Your welcome!
Good info! Ashford CT. JD 410B
Thanks for watching!
How to create more problems lol
WOW! Dude I’m doing this!
For a cheap fix it works!
Where are you located
CT in an area where the old farm land I grew up riding my dirt bike turned into houses that like to pay for split wood then do it themselves
@@Aaronzap15 I’m in northern Maine and this type of thing isn’t really big at Pierre, which is surprising to me, but I’m gonna give it a go probably next year Thanks for getting back to me. I appreciate it. Have a good rest of your season. Same thing happened to me in southern Maine because that’s where I grew up and then we used to ride the powerlines in a lot of trails off the powerlines and people with money from Massachusetts came into this area back in the 70s and 80s changed our whole way of living up here
What’s the inside dementions of your rack where the wood goes
How much do you charge for your bundles
It depends on the wood. Right now I sell my bundles as camp firewood for 5$ . They are pine, hemlock, and spruce. If it’s hard wood I sell 8$ EA or 2 for 15$and they sell
@@Aaronzap15 yeah, that’s about fair I believe there’s not as much of that up here in northern Maine as you might think that there’s going to be one more here next year lol. Oh my goodness little thing to do now that I’m retired.
@@Aaronzap15 thank you for replying to me. I appreciate that
Saw you pushing stumps didn't see you takin out any ?
Ya unfortunately I lost the footage. I used my backhoe to pop them out and the dozer to push them
A couple of ideas that might make your bundling easier; Add a board or a piece of plywood to one end of the rack so you can push the firewood up flush, making the bundle neater. If you move the cross supports that hold up the wood towards the 'outside', which would be between the uprights, not inside them, you will give yourself more clearance for the wrapping. You can use the standard 18: wide stretch wrap rolls and cut them in half with a band saw or sawzall then you can put the wrap on faster and stronger. You can also make labels for your wood and put them under the last layer of wrap.
Those are definitely great ideas! I’m always looking to improve my product. I’ll have to give it a try. Thanks
Ouch I'm surprised you even got it to run, nowadays with ethanol in the gas usually it's no good after sitting one year and really doesn't number on the carburetors😮, did you clean the tank in the carburetors out and run fresh gas in it I'm sure it'll start and run off idle a lot better 😉!!
I cleaned the tank which it was clean and did clean the carbs as well . I think it was the carbs needed to be synced and tuned in better
Auto Body guy: That will be $3,000 for Labor
lol I know they charge allot. I know it’s not perfect but took out the big dent
As an ophthomologist assistant, I want to stress the addition of eye protection to your safety list! 😂 Ear protection, even with smaller saws, also wouldn't hurt.
I’ll keep that in mind. Thanks
That was incredibly satisfying to see working. I could SERIOUSLY envision a 30+ minute, one take, no talking video where someone simply sorts through piles of rock with that contraption. Just equalize the volume to cut out the loudest loud songs and you'll have something really satisfying to watch mindlessly! That's the sort of silly video that goes super viral!
As for a fix to the second/lower grate, you can lift the angle up (which would also close the gap between the two grates). You could also try tilting the sifter contraption with the excavator between loads of raw material to clear the lower grate
Those are some good ideas. Thanks
Great job, a few teaks and it will be working the way you want. It's going to be hard to get things to roll off of the chain link fence.
Thanks! I found that out quick. I think pipes or angle steel would work better
Hello Aaron, I have the exact same mill and it works great I bought an extra log dog set so I could cut short logs and also clamp a short board to make "Cookies" I also have a machine shop and have built two 5 foot tracks to add onto the ends of the 7 ft tracks one is used for a parking place for the saw head and the other parks my log turner log lift. also changed the engine out for an electric start 15 hp. I like the idea of lobbing off the end log upright and will also change the dogs from square to round pipe they are aggravating to say the least. also will be putting electric winch in place of the manual winch, mine has a tendency to drop and make end about 1/4 inch thicker if i don't keep eye on it. Winch is tight but there is a design flaw in the internal brake of the winch.
That’s awesome John! I have the same issue with my winch and would like to put an electric one on also. Two brothers outdoors run the same mill also and did the electric winch upgrade. Good luck and mill on!
Nice machine. Does it have a diesel or gas engine? Thanks
3 cylinder diesel. She’s a work horse
Amazing little device. I bought an antique set of hand held tongs from an antique store. I use them for picking up one end of felled trees that I cut (6-8"diameter, or so) and drag them around my property. It makes it so much easier to move them by hand. Best 20 bucks I've ever spent. Great video. Maybe a big set of forged tongs would be sturdier for those beast logs?
Thanks for watching Tim! They are very handy even tho I broke the joiner on one set but they still work! I definitely spent more than 20$ on them but I truly put them to the test. If I could find a forged set I would love to test them the same
@@Aaronzap15 "timberking" makes forged units and they are American made!. I've been thinking about buying a set but they are pricey and I'm not a pro. Many people say they are best if you have 2 people on the job because they often fall off.. I don't know.
I love backhoes so handy and versatile they blow other machines out of water
I’m impressed with the lift capacity of my 410. I’ve lifted 36” red oak 8’ . She’s a work horse