- Видео 16
- Просмотров 2 541
MachineX
Великобритания
Добавлен 20 янв 2020
Our goal is to EDUCATE | CREATE | INNOVATE within the CAM community and bring us all together through training videos and content.
NXCAM Training | Lesson 12 - PART 3 SURFACING
NXCAM Training | Lesson 12 - PART 3 SURFACING... In this lesson we go through mainly surfacing operations and how we can apply different operation types to achieve better results.
We also will finish this operation off so by the end of this video we will be ready to attack the final side of the part.
Let me know anything you want to see in the comments or send me an email at matthew.haworth@machine-x.co.uk
We also will finish this operation off so by the end of this video we will be ready to attack the final side of the part.
Let me know anything you want to see in the comments or send me an email at matthew.haworth@machine-x.co.uk
Просмотров: 214
Видео
NXCAM Training | Lesson 11 - PART 3 ROUGHING
Просмотров 922 месяца назад
NXCAM Training | Lesson 11 - PART 3 ROUGHING... In this video we go over the roughing of the 3rd part in this course, you will see my thought process of what I am thinking about when I approach a part like this.
NXCAM Training | Lesson 10 - CREATING PART HOLDING GEOMETRY
Просмотров 642 месяца назад
NXCAM Training | Lesson 10 - CREATING PART HOLDING GEOMETRY ... In this lesson we will go over how to create geometry to aid the manufacturing of the component, also this method will save us having to create a fixture for the second side! Let me know anything you want to see in the comments or send me an email at matthew.haworth@machine-x.co.uk
NXCAM Training | Lesson 9 - WORK HOLDING & CONSTRAINTS
Просмотров 1452 месяца назад
NXCAM Training | Lesson 9 - WORK HOLDING & CONSTRAINTS ... In this tutorial we are going to show you how to incorporate a work holding setup into your file, as well as some really helpful constraints and how to utilise then effectively. As always let me know in the comments what you think! matthew.haworth@machine-x.co.uk Get the downloads here www.dropbox.com/scl/fo/o15yzcwk146xs0z6mir04/AO0cEv...
NXCAM Training | Lesson 8 - YOUR FIRST PROJECT
Просмотров 993 месяца назад
Get the files here! www.dropbox.com/scl/fo/8skiv5d4pen74tl5q1dm0/AEov6QzE3H_mCtvpAWdMY5o?rlkey=ywcrtbhyv0morg0193iwwllti&st=s35d8t4h&dl=0www.dropbox.com/scl/fo/8skiv5d4pen74tl5q1dm0/AEov6QzE3H_mCtvpAWdMY5o?rlkey=ywcrtbhyv0morg0193iwwllti&st=s35d8t4h&dl=0 Once you have finished the project remember to email it to me if you want me to go through it in a future video or in a live stream! matthew.h...
NXCAM Training | Lesson 7 - Iteration Component
Просмотров 1043 месяца назад
Get the files here! www.dropbox.com/scl/fo/1drqkauaps7pgtelde976/AFmxX7QKTsNDyP5_OayrgRc?rlkey=vsvckrei5exsvbkdt8jux7ta3&st=9gpnoycy&dl=0 NXCAM Training | Lesson 7 - Iteration Component ... In this video you are going to program a new part which is very similar to the first but there are some slight changes. This is to try and replicate what happens in the real world, often you will have simila...
NXCAM Training | Lesson 5 - SECOND OPERATION CREATION
Просмотров 1843 месяца назад
NXCAM Training | Lesson 5 - SECOND OPERATION CREATION ... In this lesson I am going to show you how to create a "resulting stock" from our OP10 file, bond the stock to the part and how we can saveAs our OP10 file to save time creating the 2nd operation file. Thanks @Bumble2301 for the great advise in the last video! If you have anything to share, let me know in the comments.
NXCAM Training | Lesson 6 - PART 1 COMPLETE
Просмотров 933 месяца назад
NXCAM Training | Lesson 6 - PART 1 COMPLETE ... In this lesson we are going to talk about different roughing strategies for the 2nd operation, go over the importance of chamfering the component before the finish pass, how to add a stop to the program for the machine to check the thickness of the part and a final inspection to ensure we have cut all the features correctly. If you have anything t...
NXCAM Training | Lesson 4 - FINISHING / HOLE MAKING OPERATIONS
Просмотров 1543 месяца назад
NXCAM Training | Lesson 4 - FINISHING / HOLE MAKING OPERATIONS ... In this lesson we are going to get the first operation of the first part finished, we take a deep dive into different kind of finishing and hole making operations. We will finishing the first operation of Part_1.
What makes a great CAM PROGRAM?
Просмотров 703 месяца назад
In this video I describe in my opinion what I believe makes a great CAM program.
NXCAM Training | Lesson 3 - Our FIRST TOOL PATHS
Просмотров 2123 месяца назад
NXCAM Training | Lesson 3 - Our FIRST TOOL PATHS ... In this lesson we are going to create our first tool paths and rough out this part complete ready for finishing, we are going to take a deep dive into the different roughing operations and go through the dialog boxes for the operation types.
NXCAM TECH TIPS | How To DEBURR AN IPW
Просмотров 1103 месяца назад
NXCAM TECH TIPS | How To DEBURR AN IPW .... In this short tech tip I will show you how to deburr your part even without the edges to select by using the IPW. The machinists will love you for this!
NXCAM Training | Lesson 2 - Manufacturing Setup
Просмотров 2113 месяца назад
Here is the link to download the part files www.dropbox.com/scl/fo/2qmvqvdvh63tjshk6xjbd/ACZpHEUtyrWf2uaDGjS8HbA?rlkey=zgt9ghmeu40fzm7cj5lsee5d1&st=bpt808xz&dl=0 NXCAM Training | Lesson 2 - Manufacturing Setup ... In this lesson we introduce you to NXCAM and show you how to setup a manufacturing file ready to start applying tool paths.
NXCAM TECH TIPS | How To VISUALISE FEED RATES
Просмотров 1384 месяца назад
NXCAM TECH TIPS - How To VISUALISE FEED RATES. In this short video I will go over how to see your feed rates on the screen, this will increase productivity and give the programmer more clarity over the program.
NXCAM Training | Lesson 0 - Course Intro
Просмотров 3694 месяца назад
Welcome to the course, this video is going to give you a quick overview of the contents of the course.
NXCAM Training || Lesson 1 - Layouts
Просмотров 3104 месяца назад
NXCAM Training || Lesson 1 - Layouts
Welcome . I know you from support team When I working in partner as Cam Consultant. Good Job🎉
@@gokhan4225 hey Gokhan, nice to speak with you again! Glad you like the videos 👍
Great to see you back😊
@@tallatchoudhry thank you ❤️
I haven't seen you for a long time, I hope you are well .welcome back sir
@@fouadelshafey502 had some nice holidays and hopefully found some motivation to get this series finished 😂
❤❤❤❤
Great work, keep going, you have an interesting topics
@@gadielnavarro2644 many more interesting ones to come!
your explanation is awesome.the best teacher and best channel
@@fouadelshafey502 appreciate the kind comments! If there is anything you want to see let me know.
thanks for uploading ...it informative...but want to say....please upload 5 axis multi axis lessons .... because there are so many other channels that already provided 3 axis lessons and tutorials..... so please please make advance 5 axis tutorial that no one willing to provide........
@@Whhhoo3_3939 Hi, don’t worry we will be getting into all the 5 axis stuff in this course. We have just completed part 2, the next lesson will be a project for you which is also a 3 axis part. Parts 3 and 4 will be 3 axis parts focusing a little more on surfacing. Then part 5 will be our first introduction to 5 axis operations. Please be patient, it is coming 👍 Matt
that was really benefical sir
No problem at all, I'm glad you are enjoying the content!
many thanks sir for your efforts. I really appreciate your work
Thank you for your kind message!
Hello again! In my opinion, bringing the OP10 "rest blank" into the OP20 setup would be easier if you select OP20 program in the geometry menu ->workpiece->Blank -> and there from the drop-down menu "IPW -In Process Workpiece". From there "Browse" and select "Workpiece" of OP10 program. The positioning should be "From the part". In this way, you can automatically transfer the remaining blank from the OP10 program to the new program and it will always follow the part, no matter which position part is from OP20. In addition, if the OP10 program is updated later (there are changes to the residual blank), it is always automatically updated to the OP20 program. This option is very nice and usefull from NX.
@@tuoppi861 hey 👋 This is certainly a great option and I will demonstrate this in a future video if people like that way of working. One issue for me is I personally don’t like my stock to be in the “link” chain for stock models. If I go and edit my OP10 program I don’t want my future operations to go ungenerated, but again this is my personal preference and experience. Saying that I’m sure some people would prefer to work this way 👍 Thanks again tuoppi!
@@MachineX_ Yes you are right. Unnecessary generation and update of the blank is sometimes frustrating (if the blank doesn't really change). On the other hand, if you determine the blank from the created facet body as in your video, it is quite a big job to change the blanks in all the rest of the programs, if, for example, there were big changes to the OP10 program and the residual blank changed a lot. Maybe there would be a development proposal for Siemens that there would be no need to do re-generations if the blank doesn't really change...
@@tuoppi861 I can certainly see pro and con for both ways, it would really depend on the company and the kind of parts they produce to determine which would be better. It would be a cool idea if you could use your idea but make it non associative or something like that ❤️
Thank you for the great videos! Veryfying and anlayzing toolpaths stock levels, I would like to use more this mouse "click" options than compare only colors. When you make mouse click around the part, you can see actual stock in millimeters for the clicked point. Hopefully you show this option as well later videos :)
@@tuoppi861 Hi mate! This sounds like a great idea, I will try to showcase this in the next video! Thanks again for your support.
Another great video. I liked the deburring at the end, that was a nice touch that shows experience of programming in the real world. For 39:22 I’d often use the Strategy -> Adjust feed rate function to allow a faster feed on the straights but a slow down in corners, so the best of both worlds. Probably not worth it on this small pocket but worth you mentioning for a future application. Keep up the good work
@@Bumble2301 Hey, appreciate the support mate! I’ve come across the adjust feed function before and remember playing with it in past parts but I don’t believe I’ve ever used it in the real world. I’ll bare it in mind for a future video as it definitely could be useful, thanks for the feedback! Matt
Waiting for the next lesson☺
Another long one 🤯 but lots of good learning! Thanks for the continued support
Hi I have one doubt like when we are using adaptive milling toolpath is it necessary to use line output because some machine cannot calculate too many G2 G3 Lines or we can use it with arc perp/ par with tool axis or is it a myth to use line output whenever we are using high speed toolpath strategies
In my career I have always used “Arc - Perp/par to Tool Axis, but I have been lucky enough to be around top quality machines. I believe adaptive milling strategies would be completely fine on most modern machines but I can imagine if you are using older machines then a more traditional cavity will may be more efficient as you could experience some machine “juddering”. I hope this answers your question and thank you for the continued support!
thanks for uploading ...it informative...but want to say....please upload 5 axis multi axis lessons .... because there are so many other channels that already provided 3 axis lessons and tutorials..... so please please make advance 5 axis tutorial that no one willing to provide........
In this course I will be covering 5 axis don’t worry, it will be on part 5 👍
I'm really enjoying your NX CAM course on RUclips. Your content is incredibly helpful and well-explained. However, I was wondering if it might be possible for you to upload at least two videos a week? The wait between uploads feels quite long, and I'm eager to continue learning.
Thank you for you kind words tallat! I will try my best to ramp up production to 2 a week I can understand it must be frustrating having to wait for the next one. I thought this route would be better than waiting months for the full thing. Thank you for your support ❤️
Did you manage to download the parts all okay?
Thanks for the tip. Looking forward to the next one in the series.
Thank you! Appreciate the kind words 👍
What is the link of the website
Hi, the website is still an ongoing project as I’m coding it myself. If you follow the channel and LinkedIn you will be updated on there when it is up and running 👍
❤
If possible can you also make a tutorial for vericut right from machine building and creating complex tools ,angle heads in vericut and simulation
Unfortunately that won’t be possible for this course as I do not have the correct licences for Vericut. I will take a look into ISV simulation at the end of this course using the built in machine templates in NX! Thanks