Видео

Which wire do you insert the resistor on ?

You should explain each sensor

Electrical tape! Where’s the heat shrink!

Does it work for Pajero gen3 4m41 also?

hey legend! i have the codes 21, 33, 34 & 35. any help on where to start. not a mechanic at all. thanks for al the info 21 Accelerator pedal position (APP) sensor system Open-circuit/sensor malfunction P.23A-415 33 Transfer position switch system Open-circuit/shortcircuit/switch failure P.23A-462 34 Free-wheel engage solenoid valve system Open-circuit/shortcircuit/solenoid valve malfunction P.23A-473 35 Free-wheel engage switch system Open-circuit/shortcircuit/switch failure P.23A-486

Hi where did you get the tool from ? If you can share that it would be helpful, ty

Great tip - thanks

The preferred way to do this mod is to cut the blue/black wire AND the yellow/blue wire and then add the 4.7k ohm resistor between the two. This ensures you’re taking the thermistor in MAF sensor out of the circuit completely. Placing the resistor inline may not work in really cold climates.

notice engine run abit hotter when egr deleted

Is this fix good for a Mk6 VW TDI 2.0 Diesel also? (Where ever legal of course)

clean your soldering iron may help lol

Thanks!

Will this cause the check engine light to come on?

Thanks for walking us through. I've done EGR delete but I'm hearing comments that in the long term it'll damage some parts of the engine's internals. Have you encountered any of those side effects personally with EGR deletes?

Thank's for sharing

جربت الطريقة وفعل بفضل من الله وفديو سابق لشخص من عمان وفعل اتصلح بعد خسارة ٤٠٠ درهم امارتي والموضوع تصليح بنفسك لايكلف شي بس عدا التلحيم

Thanks for this very intuitive video. Wonder if you can help me with a problem I'm having with my Pajero? It's a Gen 3 3.2 diesel (4m41)

Wtf did you just say, dam that all went over my head 😂

What are the springs for on the manifold bolts

Is it very different for a 3.8L petrol Pajero (6G75)?

Aaaand done!! Now repeat 23 more times😆

Do i have to blank egr with plaque?

Do i have to blank egr? With plaque

if anyone wondering. for mk4 4m41 engine (3.2 diesel). the original solution from the web is to use 3.6k resistor but that was quickly rectified that in warmer countries a 4.7k should be used. get the 1W ones with 1% (not the tiny ones which are 0.1W). for 50pcs you shouldnt pay more than £6. it is basically untraceable if you will put isolation tape around it. a good check is to read the egr measurements through ODB2 reader (a cheap bt adapter is more than enough) before and after application

Hey Rudi , nice work shop mate . Have you done a video on the ever present oil leak from oil cooler / filter housing that runs off the spin on filter ?

Hi,Is it possible to state the part number of the connector or something?

I try but then 7000km, i think the liter pro mile is increase...

Thanks for that help. It's a bit far to drive to come and see you from Tweed Heads 😅😅😂. Whil I've got your attention 😮 . My Brakes on my Gen 4 NW pulse ? . I've replaces thd front Discs and pads but it's coming back ?? . Any ideas ?? . It is the same with my Mates 2010 model ?? .

Thanx for gr8 video, the other day I place that resistor on my pajero NS 3.2 147kW. So far car run smoothly but i notice engine became one idea noisy and keep little bit higher idle RPMs could it be from that resistor?

Does this work for gen 3, non common rails?

Also I am currently working on Mistisubish Prado V8/V9 diesel 2008 model it's a cranks , no start situation , no injection pules , if you can help sort out the problem that will good .

Thank you the information you showed is very easy and understandable I very much appreciate your time , do you have contact details ? Thanks again

I did exactly what you said on this video but the fuel level is still moving about. When i turn on the key ignition the fuel level was low, when the i start the engine the fuel level when up. Any advice what to do next ? Maybe need new fuel pump?

Appreciate this tutorial and will use it myself. Great job, thanks a bunch. :)

Great and thank you. Would be ideal if filmed horizontally…

Hey Rudi , do you have a video on NW fuel guage and range indicator calibration/ reprogram ? Love ya vids mate , as a newby to Pajero you have taught me a heap . Thanks mate

Does anybody know what resister is the rpm? Or can anyone point my to where the wiring diagram might be that shows and labels what the resisters do on this PCB board for the cluster? Cheers in advance.

Legend mate. had a Russian explain this in Russian to me and didn't understand a thing now I will finally get the flaming thing fixed. On a side note I appreciated your self control when you dropped your tool i often watch these videos with my children around and am always looking for clean channels. big thumbs up from me.

I've done a couple of these now, using oven cleaners. Found the Selleys maybe a bit harsh on the aluminium. Probably would not leave that one on for more than 15 -20 minutes. Remembering my teenage years working on old motorbikes, I used petrol to clean everything. Tried petrol on the manifold and it was brilliant. Quicker, easier and cheaper.

I just done the valve stem seals on my KL Verada, your video was a big help thank you

If you can share the name of the shocks ( brand)

What the problem with valve seal

can u show us how to do dpf delete on ns pajero thank

Ive read the Munji ones allow the blow off valve to funtion while allowing the EGR to remain closed on the way in. Is that the case of the resistor ones also? Additionally, would there be any issues if you took this in for a service and a mechanic spotted the fact that youve disabled your EGR

Gracias!!

Will it not cause the EML light to come on...

i did that now i get an engine light that i cant remove

I did it and it threw EGR fault code

Hi good vid , do you know the wire colour on a 3.5 GDI model , thanks in adt

good video really. I have to do this job with my mecanichal here in italy were the pajero is not so popular. In your opinion, what gasket i have to pre order? certanly intake mainfold gasket ( 1540a277) and other that i can 't reuse? And then, to adjust valve clereance i need the gasket timing cover (me192209) and 8 for the injet (mn 158385/ 1052a099)? thank you and sorry for my english