Видео

I would get a UV flashlight that has wood's glass. The woods glass blocks the visible light from the purple.

Pointless video

You are completely incorrect they are not temporary they last a minimum of 8 years . NVR had one fail yet

Walk ins are the worst work in my book

J'ai plusieurs marque de régulateur celui avec le moins de sav et carel dixell en supervision et loin graphiquement et fiabilité par rapport a carel danfoss etc. Votre pays secteur ne travail peut avec carel comme dans mon secteur dixell et au millieu entre ako carel danfoss eliwell dixell etc Dixell la plupart des composants et fabrication réalisée en chine carel pour du oem chine car chez mes fournisseurs parfoit écrit dautre pays pour moi toutes les marques sont au même niveau qualité développement logiciel carel et danfoss de mon points de vue on une avance Johnsoncontrol moi j'aime pas car la logique de paramétrage et déroutant pour moi pourtant ils sont fiable chaque technicien a des préférences 1 câblage 2 paramétrage 3 visuel 4 fournisseurs (produit de qualité mais personne na de disponible tu installe autre chose). Ayant dans mon parc beaucoup de marque les services téléphoniques carel en france et ultra ractif dixell faut prendre rendez-vous par mail😂 voila un point de vue d'un autre frigoriste d'un autre pays.

Hernandez Jeffrey Lee Margaret Wilson Joseph

How did you even remove the evap/condenser from the pop cooler?

A you forgot to. Put another of water hose

Great presentation. Like others have mentioned, in the classic legislation environment, where you are just pulling water from the tap to cool the condenser, yes - these are generally not eco friendly. However IMO, if you have a lake, a geothermal system, a small chiller, or the equivalent, you are much better off with the water cooled system.

Thanks for sharing

The only explanation on youtube that is real and helpful.

Really!!! Spraying that crap in a fruit freezer???, Is this guy a IDIOT, or just from some Country that doesn't know better? What a IDIOT!

Thank you for your information

is it possible to reuse the hot water coming out for other purposes like toilet flush/washing machine?

Tell the truth you let the freon out into the air 😂

what about 6 ?

can I have one of those chemically soaked oranges please? good lord

very cool concept of water cooled ACs

hope you weren't the installer?

Didn't get c1, only thing that showed up was rd, HELP

Nice work

I would remove the entire EVAP coils and take outside to clean.. then completely let it sun dry.. Same with the fans... remove , take outside to clean.

Mistakes friend,first defrost the evaporator,the valve allready is working low superheated and liquid is flooding in compresor.You "fixed it the opposite way",you destroyed it...haha

Ty

Stop using trash

How did you miss that pinched off liquid line at the bottom flare nut on the Txv valve?

I have a true drink cooler it was freezing the drinks no matter the setting it was on I replaced with a new thermostat off eBay and it will not cool below 50 degrees 831932 part number idk if you have any idea thank you

Will there be a video showing how freon is pumped into the receiver when the filter on the refrigerator is changed? Greeting

Where is your BEARD NET? That's a GMP VIOLATION.

You are using more refrigerant to cool the water in an exterior motion, and a pump which uses electricity to pump the water that the condenser is submerged in to merely achieve greater results all legal

All you must do is put the coil submerged in water, circulate the water with the pump to a reservoir of cold or water, using the same principle of AC to cool the condensing unit in no time the transfer of heat will be much greater

I have a 115 volt walk in cooler. The compressor has a start and run capacitor. Would a 3n1 work on this application?

DO NOT follow this guys steps, he did it the incorrect way. 🤦🏻‍♂️

Great information, thanks 👌

you idiot the cam was on fire 😂😂😂😂

Could not see any work being done

Hello partner on duty! A got some kind of troubleshooting this type of problems... This time was a low ppressure in liquid line just afte filter drier (160psi) and quite good pressure in low side after evap n Comp rotalock (18-20psi) for a 404a walking in freezer meat storage. Txv and beyond still froozen. Sight glass is clear most the time then just flush ... I know is full, Maybe refull of refrigerante the entire system. Good both sides vents, cond-evap were washed. Help me, dont wanna loose this client😢

But this is absolute rubbish for repairing household refrigerators. I have been professionally repairing household appliances for more than 20 years. I have tried various seals from time to time. None of them give a significant result.

Why you have to adjust the txv if it was working properly before?looking at your suction pressure and considering that the evap coil have some ice i assume you have overcharged the system.Also you dont measure superheat without cleaning the ice of the evap coil first

I have one similar. I plug it in and does not come on. The only noise is from the Omron GL7, the only clicks as i plug the unit. PLEASE HELP..

Hookup the water to closed loop geothermal.

is call omega clip 2 plastic spacer, square washer then the bracket and finish with the star washer and the final screw

Thank you for your video, got one of these and trying to figure out how to fix the gaps.

Terrible video...not worth watching!!

How do you clear a cl alarm ?

Just barefaced it huh bruh

it would have been a great video if you show the controller rather than your face , we could not see what you were doing

You should always check power hot to natural instead of ground. It possible you lost your ground

Good job, pls can have your WhatsApp number

Is the door heater connected with the compressor… is it ON all the time or only works during defrost?