Видео

It's soooo frustrating that Harbor freight can't sell a freaking tension screw! Can you tell me where you bought yours.. evidently this is a huge problem with this tool.. they should give you a couple extra when you buy the pole saw...

Thank you! So helpful! Was thinking the red lever was the choke and couldn't get it started!

You may could try and use a flat chisel and hammer

How do you get them out when they're stripped already?!

How did ya get it up on the picnic table?

Lost the screw today. Now I know it's common and easy to replace. Thank you! Yes, great little pole saw.

Thanks Kevin, great job my good man.

Thanks

Thank you for your time! I just have to find a picnic table, for tomorrow I gotta get me a bed for my truck in the morning!!🫣

Anybody gonna comment on the tower of power fans? Holy crap my man!!

I had a misfire issue a week ago. Had noticed reduced power for a while but never felt the misfire until last week. I hooked my scan tool up to read live data. Cylinder #3 was the only one registering misfires. I swapped the plug and coil. Misfire remained on #3. Swapped wires and the misfire moved so I replaced the wires with the factory Delcos. Truck smoothed out and has more power. Hooked up my scan tool just for giggles. Now it has a random misfire the misfires twice on randomized cylinders. It went from 1600 misfires on # 3 to 2 misfires on 1 , 3, 5 ,6 & 4. Can’t feel it but it registers 2 and it’s gone to a different cylinder. I was watching my upstream 02 sensors jump all over the place from over one down to .015! I didn’t think 02 sensors were supposed to move that much. I bought 2 upstream O2 sensors since they are cheap and mine are the originals that are 14years old and have 143k miles on them. Hopefully they help. It’s just strange how it went from many misfires on one cylinder and the 2 misfires on randomized cylinders. 🤔

Great video! Excellent information on replacement screws.

Saved my life and lots of frustration trying to find this screw 🙏🏻🙏🏻

Torx 🙃, thanks for sharing the pain. Sierra im working on had the top pin blocked by the leaf spring ....

Thank you so much. 6 year old video but helps me today. Came in to search RUclips after demolishing my thumb trying to get that t-55 loose. And I'll be heading to the parts store to get those replacement pins

I bought some off Amazon what time and it didn't work. It gave me more problems so I went back to the OEM.. and he was cheaper to get the OEM for the blower motor and the resistor

Lol ...

Dude your video saved me $200 for service on my 3 -193s👍👍👍👍👍👍👍👍

thank you for making this video as i was at my wits end trying to get those ^%$#^$$^vtorx off

Thank you for your video.....I was about ready to cut the heads off and deal with the bolt shanks after the fact....your video gave me a way to remove those *************!!!! torx head bolts holding the calipers onto an 86' Fiero....took about 20 minutes to remove the 3 other calipers...but this last one (rt.rr) decided it wasn't going the traditional route. Wasn't easy getting everything required in place...but once in place....bolt came out right now! Altered your method a tad...but the principle is what was needed. Thank you!

THANK YOU! Used mine 1 time and lost the screw.

THANK YOU! Used mine 1 time and lost the screw.

Real video. Everyone is taking out batteries and abs module. Crazy people

This has been a suspicion. I'll do this tomorrow. Hopefully, this is the problem. Thanks for the insight!

Thank you I just got a go kart and I couldn’t turn it on

THANK YOU SO MUCH FOR POSTING THIS VIDEO!!! This worked great!! I wasn’t sure what I was gonna do. Now they’re 18 mm bolts! You rock Kevin!!!

Did the air bubble eventually go away after pumping the brake?...because that bubble is from the return line from booster to pump hose .... I get new pressure built up after a new gm pump(08 model for bigger tires is Awesome ifvyou have 20s.i got 20s and 285s and i can turn the wheel sitting still with the foot on brake right after i installed it,fyi) Gonna try it ...and report back thanks partner!

I've completed this job many years ago and just want to tell you, you did an excellent job at describing and documenting the entire process. Thank you

Those came out on my 06 Yukon, it’s the rear caliper bracket bolts I can’t get off. Just started getting familiar with a blow torch

after setting chain tension lock down 6mm allen bolt then lock down (tighten) the slotted adjust screw.

great idea cant believe i didnt think of this thank you

Thank you so much for the video. I bought the screw at my local Home Depot and it works perfectly. I had called Harbor Freight and they told me no replacement screw exists.

Best video I seen well explained thanks!

You talk a lot

unloosen

Nice presentation for an old shade tree mechanic. I’m sure it will be handy to some do it yourselfer. Keep up the good work.👍🏼

I agree with o2 sensor causing a multiple cylinder misfire, been down this road several times with my fleet of gmc sierras..

The trick to adjusting the cables is you put the transmission into neutral, release the clips on the adjusters, put the shift lever into the position where the u-shaped metal clip sticking out behind the ball pivot on the base of the lever can slip forward and lock it into the neutral adjustment position, verify again that the transmission is indeed still in neutral and then press down the locking clips on the adjuster ends of the cables. Now release the neutral adjustment lock on the shift lever and your done and should have a properly adjusted shifter. Test the function of the shifter and if everything is happy, put all the trim, etc back together. It sounds more complicated than it is and the Haynes Manual doesn't include the diagrams on this procedure on the page with the written instructions making it harder to follow. Before doing this it would be good to lubricate the shift cables by sliding back the boots on the transmission end of the cable and either use a White Lithium Aerosol or PBlaster Garage Door Aerosol Lube which is also a very good cable lubricant. Best!

✅

You da man 👏🏽💪🏽😎

What model mirrors did you replace with and where did you get them. Good job on video. My truck has one more screw located at the bottom of the door that is screwed into the storage of the door.

Will this work with 2003 Saturn ion

A real headache

Thanks for the advice a need one of those c clamps

The engine has a bottom end cap that splits and leaks air. I fixed mine just now. But need carb adjustment now correct amount of turns to get torque level correct.

Thank you. Been trying to figure out how to haul a truck bed on my trailer and this is it. Never thoughtabout using a pictic table as a base. Great thinking!

You saved the day! Thank you sir.

You have the best video on the subject I have seen. I had to replace the wiring harness that you showed. but the disassembly You showed. made my project easier. Thanks'

Thanks very informative, I’ve used electrical tape to hold bolt heads to sockets, but never used the paper towel trick, good to know. Socket sizes would be helpful and how to bleed air out of the fluid system.

Replacing the cabin air filter would have also been duck soup EZ while you were there