Видео

Yes. QL-820NWBc is identical to QL-820NWB except a rarely used port/chip is removed. It is fully compatible hardware and software wise.

@@brotherhackathon9107 thanks

Yes, you can print using tattoo stencil paper.

Hahaha... you are flattering me. I spent a hour looking for it and was unable to find it. I will take some photos and show you how to make them. In fact it was very easy. Just get a DK-2226 cartridge, and the goal is for it to sit on the 3D brick. Make sure the slot is deep enough so the printer will not pull the stand and tilt the roll. You can always use a double-sided velcro to situate the the stand so it won't be moved easily.

@@brotherhackathon9107 thank you for your efforts and prompt response so many years later. I just discovered this printer, and picked up a Pentax PocketJet 200 and Pentax PocketJet 3 Plus to experiment with. If I can print continuous labels or die cut labels with them, that may prompt me to invest in a newer model.

Hello, the printer is great with iOS device via WiFi and AirPrint. To work with macOS, you need to go to Brother's website and download the driver. I have not tried the Windows machine yet so I cannot help you with that. Anyway, it is a nice printer and there are many iOS apps for it. Just search RJ-4040.

Thermal paper typically lasts about 7 to 10 years under proper storage conditions. To maximize its lifespan, it should be stored in a cool, dark place, away from direct sunlight, heat sources, and high humidity, as these elements can accelerate the fading of the print. Additionally, it's best to avoid contact with plasticizers, which can be found in certain types of plastics and vinyls, as they can degrade the thermal coating on the paper.

Thank you for your comment. Micro USB is still alive and widely used. I actually like the PT-P300BT for its lightweight and with the use of AAA batteries. Besides, all these printers you mentioned should be mainly used with Bluetooth and they work wirelessly with both iOS and Android devices.

Yes, it is a little pricy. You can get a used RJ-4040 from Ebay in the US for under $100.

Sorry for the late reply, I was using the 4"x6" die-cut labels. This printer has a rear slot that allows you to use just about any roll labels, fanfold labels, including the one from UPS, which you can request for free. You can also search die-cut label rolls for Brother RJ-4040, RJ-4030Ai, RJ-4030, and the newer RJ-4250WBL, printers.

I appreciate it, I thought that's what that slot might be for!

Это принтер PJ-663. It is a PJ-663 printer. download.brother.com/welcome/docp000642/pj622_623_662_663_useng_ug_04.pdf

PJ-663 поддерживает только устройства Android. PJ-663 supports only Android devices.

Yes, you must use stencil paper for printing purpose. Although I did a few times with PJ773, PJ763MFi, PJ663 (Android), and PJ622 (Android USB), I am not an expert in tattoo stencil printing. I would recommend that you search RUclips for Brother PJ763MFi or PJ773 for tattoo printing. There are quite a few of them. When I have the time, I will put together a video as well.

Yes, you must use stencil paper for printing purpose. Although I did a few times with PJ773, PJ763MFi, PJ663 (Android), and PJ622 (Android USB), I am not an expert in tattoo stencil printing. I would recommend that you search RUclips for Brother PJ763MFi or PJ773 for tattoo printing. There are quite a few of them. When I have the time, I will put together a video as well.

tengo la misma duda no puedo ingresar el PIN no se cual es

The PIN number is usually the last 4-digit of the bluetooth serial number, which is in the bottom of the printer. El número PIN suele ser los últimos 4 dígitos del número de serie de Bluetooth, que se encuentra en la parte inferior de la impresora. help.brother-usa.com/app/answers/detail/a_id/153728/~/bluetooth-passcode-or-passkey-to-pair-unit

USB is for desktop mainly. You should use WiFi for PJ773 and Bluetooth for PJ763MFi. For Android users, you can use USB but you need a compatible cable and software.

Hello, battery is great and it works with both WiFi and Bluetooth. I personally use this setup all the time printing name badges at many events. They usually run for 4-6 hours and can print maybe 300-500 labels. For important events, I usually bring 2 sets of printers.

Brilliant thanks for such a prompt response your video has helped a lot.

My pleasure. By the way, I have 2 printers with the batteries and they have been in service for more than 5 years now (with light uses). Use this information for your return-on-investment estimation.

Only thermal paper can be used. They are actually very similar (if not the same) as the traditional fax paper. I bought 6 rolls from Office Depot and they worked quite well.

Oh, No. Unless you got it really cheap (like under $200), I would return it. PJ763 is only for Android and desktop/laptops via USB. It will never work with any iOS devices. Other than using an Android device, you best alternative is to get an 11" MacBook Air ($100 used) and connect it to the printer via USB. Hope that alleviate your pains.

@@brotherhackathon9107 I got it at a really good price here in Europe, in store is about 800Euros, I got it new sealed for 250, and the solution I found, do my work in procreate ipad, save it into my pinterest account then downloading the stencil on my laptop🤘🏻

That is awesome! What a great deal. BTW, I assume that you know that you can print to PJ773 directly from Procreate via AirPrint.

@@brotherhackathon9107 since I got this printer I’m like a brother expert now lol, I know but the 773 it costs about 900 euros and it’s not really a deal since I got this one, thanks !

You should be able to use the cassette/cartridge until all film are used. Just follow the instructions from the manual when removing and re-installing the cartridge. Describe what happened when it didn't work for you.

It is a wireless (WiFi) printer. It supports AirPrint.

@@brotherhackathon9107 ok thanks

Blank. Won’t hurt.

@@1to1class So it cannot print on both sides of the original Brother thermal paper?

Correct. It can only print on one side as with all thermal paper. It is the shiny side with a coat of special chemicals that reacts to the heat from the thermal head.

@@1to1class Arghh, I hoped to print some booklets with this, but then it's a waste of paper.

@@mobilhome1824 That will be more than just a waste of "expensive" paper. Unless you wish to be 100% mobile, won't you want to print the booklets using regular paper (cheaper, faster, and better quality)? I love the PJ printer for its mobility. It is usually used by professionals on the go. CPAs, contractors, lawyers, etc. Police and exterminators (non-related) love to use this pocket printer to print tickets and invoices. :)

Unfortunately this printer is not designed to support iOS devices (iPhone, iPads, etc.). But you can always print from a MacBook. I have an 11" MacBook and it works with this printer beautifully. Also, with a MacBook, you are also getting all the desktop apps that can print to this printer, including my favorite - Pirateship. Using Android device with USB/OTG is really not that convenient. This printer is not classified as a portable printer anyway. On the other hand, you can always spend an extra $100 getting a QL-1110NWB, which does support both iOS and Android devices.

@@brotherhackathon9107 agree, but I don’t think you should have to do that considering it has a USB port on the back it would be dope to plug in the USB a and directly print from an iPhone

@@brotherhackathon9107 think about it the future is going to be wireless and portless this printer, id becoming outdated within the next 5 to 10 years because a lot of the devices will no longer have ports I can even see we get to a point with laptops don’t really use ports other than charging

it is the iOS device that does not have the USB connections, not the printer.

totally agree! that is why you have the QL-1110NWB model that supports both Bluetooth and WiFi. The QL1100 is $100 cheaper because it does not have the electronic components for the wireless connections. It is also more affordable.

I will make a video to print on fanfold paper. It is actually quite simple because you have a MacBook. To do so: 1) install PJ622 driver if you haven't done so, super easy, 2 minutes, 2) add PJ622 printer from your system preference, 3) pick an image to print and select PJ622 from the printer list, 4) from Paper Size, choose Manage Custom Sizes, click + to create a new size, and set paper size 4W 6H, and 01" for all margins, click OK to save it, 5) now it is important to click Scale to Fit and Print Entire Image, and set to Portrait Orientation, 6) Click Preview tap and select Printer Features, density 6 is good enough, disable 2-ply mode, set to fixed page, and HALFTONE is important. Set to for logo and text (Binary) if you are print black and white shipping label. Or set to Error Diffusion/Dither. For your fanfold paper, I would recommend to tear a few labels and print one at a time. With the label size down, insert the label in portrait orientation, the edge against the left of the printer guide. It should be really dark. I am not sure why your printout being very light. Please share me your settings and the type of AC Adapter you are using (i.e. 12V vs 15V, 2A, 3A, 4A, or 5A, etc.). I have tested on Brother original PA-AD-600, PA-AD-600a, the generic Ablegrid 15V 4A ($15), and the super cheap 15V 2A from a household appliance.

@@brotherhackathon9107Man, you're a legend. Thanks so much for your indepth reply! Installing then 622 driver and using your settings seems to work *nearly* perfectly! am getting a clean, easy print, and the darkness is perfect - but for some reason, even with the paper resized at 4x6 and margins at .01, it seems to be printing exactly half the size of the label each time 🤔 will try some different images, and tinker a bit more with the settings, but apart from this sizing issue your suggestions are extremely helpful! I am using a 12v power adapter, have a 15v as well. In summation, everything now prints smoothly, but the labels insist on coming out half-size (the printer seems to treat them like they're 2x3).i upped the size to 8x12 and that didn't work, but, hey, you got me nearly perfect and im sure I'll get the sizing resolved swiftly! Thanks again, very kind of you to respond so thoroughly.

@@brotherhackathon9107 Yeah, have messed with as many settings as possible and it's still printing the image at half size..it.will.feed the label through and stop when its 75% out of the machine, with a half sized print. Real head scratcher...

@@No1hyp0cr1te 1) Did you check Scale to Fit and Print Entire Image? 2) Try to get an image that has an resolution of 1200x1800 (to fit 4x6 at 300 dpi), 3) Google and search for a shipping label in PDF file also 4"x6". In other words, test both image and PDF files. Trust me, you will have an aha moment. I am still trying to find time to make a video. You can also email me direct at brotherhackathon@gmail.com and I will take a look at your printout. P.S. happy to help. :)

@@No1hyp0cr1te P.S. what do you mean by the paper resized at 4x6? I meant to actually create a paper size 4x6 that you can use it in the future. Also, you should see a preview on your print screen and it should look exactly when you print it.

HPRT MT800 uses thermal transfer. It is not a thermal direct printer. Thermal transfer requires cartridge with film that ink is transferred to your regular paper. Yet, thermal direct, as is with Brother PocketJet printers, require no cartridge. However, with thermal direct, you need to use the thermal paper. With PJ, you will never have to buy any cartridge, or ink, etc. The print will never fade either. FYI, a thermal printer is rated for 164,000 pages. That is a lot of pages without ink. Hope that helps.

@@brotherhackathon9107 thanks a lot.. it's a very great info to me. Thank you again.

You are welcome. Brother PT-P910BT is their top-of-the-line P-touch printer. The resolution is 360dpi. Their PT-P710BT's resolution is 300dpi, which is also pretty good. The consumer version PT-P300BT is only 180dpi, which surprisingly is also decent. If you need to print to a variety of P-touch tapes, from 6mm to 36mm, this is the only printer that can do the job. One more thing, for you to get the 360dpi, you obviously need to have the source that is at least 360dpi. If your image for example, is only 100 dpi, then the output will be only 100 dpi. Also, whatever the app you were using, see if there is a setting that allows you to choose the highest resolution. If that is too much information, just enjoy the printer and almost everything comes out should look good. :)

@@brotherhackathon9107 I appreciate the response, thank you. Does it also print custom logos from vector/svg files? And is it compatible with all TZe P-touch tapes?

My pleasure to help. Regarding custom logos from vector/svg files, it depends on the app you are using. The printer will print any png/jpg/pdf files via most apps. Your app most likely will have to convert them to PNG file. As a reminder, this is a single color print. For best result, you will convert it to black/white, preferably solid color. Yes, it is compatible with all TZe, P-touch tapes. You can even print to the Embellish ribbons.

@@brotherhackathon9107 You have been very helpful, thank you once again..

Hello, on the back of the printer you can see explanation of the status lights. For example, if it stays on, that means it is being charged. It may take awhile before it is fully charged. Refer to the manual for more information.

Yes, it does. PJ773 is a WiFi model. Follow the instruction on connecting the printer to your WiFi network. Then you can connect your Android devices to the printer via the apps.

Please be a little more specific. There are a lots of apps that support this printer, including using AirPrint.

You can find them with this search: www.brother-usa.com/search#q=rj4230b&t=tab-All&layout=card

The shipping labels are Brother RDM03U1. It is out of stock at Brother website but you can find them at Amazon (by enter "brother RDM03U1" in search). They came with 36 rolls of 69 labels each roll for about $200. So it is about $6 each roll. This printer does not support fanfold labels. Remember the main advantage of this printer is its mobility and ruggedness. They are mainly used by law enforcements in issuing tickets (hahaha...), or heavy uses inside a warehouse. You can also find alternatives from Amazon but make sure that it will fit inside the chamber.

@@brotherhackathon9107 Oh yeah, I got it for the mobility of it so i could use with ios devices via AirPrint. However, I can’t even get the damn thing to work! I’ve followed the instructions to connect it with my router and the option to AirPrint with it on my iPad doesn’t show up. Neither does it show up as a wifi network in my iPhone/iPad wifi settings. Any ideas? Also, will this thing not run without wifi?

@@brotherhackathon9107 It was a great deal. New for $100 on eBay. I just had to buy the charger and battery elsewhere. All in all maybe $150?

Have you followed the instruction on this user's guide? download.brother.com/welcome/docp000684/cv_rj4030_usaeng_usr_f.pdf RJ4040 is a WiFi model. I set up mine using the simple one-touch WPS method so I don't have to mess around with a Windows PC. Once it is connected, you can print. Perhaps yours was used and had been configured by the previous owner. I believe there was an instruction on how to reset the printer. You can also follow the instruction on page 52 showing you how to print the printer information settings, including your current WiFi IP address. I haven't touched the RJ4040 for a long time. It should work. You can call Brother support and they are very nice people. But you may not have the warranty as this printer is obsolete. My suggestion is to be patient, read the manual carefully, and I am 99% sure yours printer will work. $100 new is a good deal. You don't need the battery to run. But you do need the AC adapter to turn on the printer of course. If it still fails, you should get your 30-day Ebay warranty. Lastly, as much as I like this printer, Brother has discontinued the model and it could be frustrating setting up this printer if you are unfamiliar with it.

I just tested it with AirPrint and it works nicely. Go to your photo album, select any photo, and tap print. Select the RJ-4040 printer, and it will identify the labels you have in your printer and print accordingly. If you don't see the RJ-4040 printer on the list, your printer may not be connected. Again make sure the WiFi blue light is on, and the printer power light is green, no other light should be on.

This PocketJet printer is not a scanner. However, it will be a good idea if it does scan as well. Brother has a nice mobile scanner DS-940DW, which is about the same size as this printer.

@@brotherhackathon9107 thank you for the info ❤

I had the same problems. What I did was turning off the printer, retrieved the paper/label, and turning it back on. TD-2130NHC is designed for the healthcare industry. They use lots of special labels including wristbands. I have never tried them before and was not able to test them either. Have you tried to contact Brother directly? Since it is a very expensive equipment and it usually came with extended premium warranty. The one in the video was TD2130N, which is a standard version. I love this printer as it has a huge capacity for the media. Do you know that you can also feed the labels/paper from the back? Anyway, once it is printing correctly, you should be good to go. Hope that helps.

I also watched this video from Brother USA. If you have the labels with black marks on the back, make sure that your media sensor is moved to the correct position. Otherwise, the printer will spit out lots of paper/labels trying to find the correct black marks. Let me know if this can solve your problem. ruclips.net/video/M3vrMqbwpfo/видео.html

@@brotherhackathon9107 I use die-cut 2x1" labels so no black marks. When you said "retrieved the paper/label, and turning it back on" did you mean you turned off the printer, removed the label roll and turned it back on?

Yes, that’s what I meant. Or try to retrieve the labels and close the lid when it is on. I know I have the same problem and not sure if it works all the time.

Have you tried to follow the instruction from their video ruclips.net/video/M3vrMqbwpfo/видео.html and set the label accordingly?

Unfortunately this printer only supports USB connection with 1) Windows desktop/laptop, 2) Mac desktop/laptop, and 3) Android smartphones via the special connector. I will put more information on that adapter on the main description.

About the OTG USB cable. It is actually quite simple and inexpensive. You cannot find any more information on Brother website either. Here are some more information: 1. Micro USB Male to USB 2.0 Female OTG Adapter Cable. So you connect the Micro USB Male to your smartphone, and the regular USB cable that came with the printer to the USB 2.0 Female end. I bought a pack of 3 from Amazon for $8. The link is here: www.amazon.com/gp/product/B00YOX4JU6/ref=ppx_yo_dt_b_search_asin_titleie=UTF8&psc=1 2. Micro USB Male To printer Cable. This will eliminate the need for the original USB cable. Again, plug in the Micro USB Male to your Android smartphone, and plug in the USB Printer end to your printer. It is about $8 each, also from Amazon. However, I have not tested it yet. I was using the method #1 above. Again, it is for Android device only. Remember iOS devices such as iPhone and iPad do not have any USB. You must use WiFi or Bluetooth to connect, only QL-1110NWB model supports these connection methods. Of course, you can always connect to your computer.

(you asked on another video post, so I copied and pasted my answer here) You can use either PJ773 or PJ763MFi. The former is a WiFi version and the latter is a Bluetooth version. WiFi advantages: 1) everyone on the network can print to this printer, 2) the iPad and the printer can be more than 50 ft away, or as long as they can be reached via WiFi, 3) WiFi version prints a little faster, and 4) you can use AirPrint. The Bluetooth advantages: 1) easy setup via bluetooth, 2) you are the only one who can access to the printer once it is connected between your iPad and the printer. One's advantages are usually the other's disadvantages. If I am a road warrior, I will choose the PJ763MFi. If I am using it mostly in a big office where I move around a lot (from room to room), I will choose the PJ773, which is WiFi version. Keep in mind that Brother has a PJ763 version, which is Bluetooth but for Android only. The PJ763MFi will work on both iOS and Android.

@@brotherhackathon9107 Aw yes, Sorry, thank you again for this really nice answer, I really appreciate it :)

You can use either PJ773 or PJ763MFi. The former is a WiFi version and the latter is a Bluetooth version. WiFi advantages: 1) everyone on the network can print to this printer, 2) the iPad and the printer can be more than 50 ft away, or as long as they can be reached via WiFi, 3) WiFi version prints a little faster, and 4) you can use AirPrint. The Bluetooth advantages: 1) easy setup via bluetooth, 2) you are the only one who can access to the printer once it is connected between your iPad and the printer. One's advantages are usually the other's disadvantages. If I am a road warrior, I will choose the PJ763MFi. If I am using it mostly in a big office where I move around a lot (from room to room), I will choose the PJ773, which is WiFi version. Keep in mind that Brother has a PJ763 version, which is Bluetooth but for Android only. The PJ763MFi will work on both iOS and Android.

@@brotherhackathon9107 Oh Jesus, thank you so much for this complete and perfect reply! :)

My pleasure. 😁

I translate your question as "How much is the price. Is it available in India?" The answer is, they are kind of expensive, range from $300 to $800 depending on whether it is new or used, and where you buy it. I think it is available in India, but difficult to find. Try google these: Brother PocketJet, PJ773, PJ-773, PJ-763MFi, etc. If you are using USB or Android, you can buy the older models such as PJ663 (bluetooth), or PJ622 (USB). The older models are still very good, I have one that has 24,000 page count and still works very well. You can find one on eBay between $80 to $160.

That is awesome! It is also one of my favorites. It is small and I can take it with me anywhere. 24mm maximum width should accommodate most of your labeling needs. The only model Cube XP that supports 36mm is bigger/heavier, and.... a lot more expensive at $299. We are giving away a few to developers in our 2022 Brother Hackathon. ;)

Once connected, the printing should be fast, if not instant. It also depends on the apps. My app, for example, is a little slower only for the first print.

Unfortunately no. This printer is USB only. You can print from your desktop (Windows or Mac). You can get a used QL710W (about $60 on eBay) and print it from your iPhone.

Sorry for the late reply. Yes, they sold separately. I believe you can print without the battery by using just the AC adapter. A compatible AC adapter is a lot cheaper but you need to make sure that it works. The spec is 12V 5A with the 2.5mm connector. You can also use the 15V 4A, or 12V 4A, or even the 3A. They will take longer to charge but it will not affect the printing when you connect to it directly. Alternatively, you can buy the less expensive 12V car adapter if you are on the road a lot. I am no electrical engineer so do your research first.

I will, when I have the time. I am currently planning for the 2022 Brother Hackathon. I am sure many of our contestants will use Android. Anyway, the idea is the same if you use the Brother's Print SDK sample app.

Yes, you can use most thermal fax paper rolls. But this demo is showing how you can print the 4" labels for signage using the DK-2246, which was designed for the QL-1110NWB and QL-1100 label printers. Besides, I don't think that you can find letter-sized thermal fax paper.

Both RJ4250WBL and RJ4230BL support 203dpi, which meets the requirement for shipping labels, including QR code. You can print large images (JPG, PNG) and select FIT to Paper. This will work on whatever paper rolls you are using. I believed that your AirPrint is boring on the RJ4250WBL, not your RJ4230BL. AirPrint does not support bluetooth. Please note that I am not an employee of Brother. I am more of a technical nerd who run some of their hackathon events. I am sorry that I do not have the resource to search for all the apps that support the printers. I know for a fact that many of hackathon contestants have successfully created nice apps that run on said printers. Good luck! P.S. I am curious why you are buying both printers first, then looking for the apps.

Sorry for the late reply. Thank you for your feedback. I am sure Brother will appreciate it. I don't work for Brother but I can understand that a lot of manufacturers prefer to give their developers the opportunities to create apps. Also, RJ-4230BL is considered as a professional/industrial grade printer. Many apps are custom made for their clients and they probably hidden from the app stores.

There are actually a lot of B2B apps for accounting/financial, POS, CRM, warehousing, shipping, etc. Remember that printers are considered as peripherals and the answers are usually hidden under developers' "supported printers" page, if any. Also, consider RJ4250WBL a WiFi/Bluetooth version, you can print to this printer using Windows, Mac, iOS, Android via WiFi, Bluetooth, and USB. Hope that helps.

RJ-4230BL is Bluetooth only. RJ-4250WBL supports both WiFi and Bluetooth. Both printers can print text and images using the Brother Print SDK app (Android). Here is the link: play.google.com/store/apps/details?id=com.brother.ptouch.sdk.printdemo&hl=en_US&gl=US. I am sure there are many Android apps that print images to many Brother printers. If you are a developer, you can also write your own with their SDK. Note: remember they are thermal printers, which print only black and white.

You can use Brother LB3836-001, 5 sheets for $2.00, Yes, $2.00. Buy it from anywhere else will cost you from $5 to $10. Here is the link www.brother-usa.com/products/lb3836-001. You can also use the lint roller that is used to get the lint/cat hairs out of your clothes. However, just tear off one sheet and lightly touch the rubber roller, rotate it and repeat. It will be super clean!! I saw some people are using another sheet of regular paper, wet a little with soap and water, NOT TOO WET, and roll it underneath. Note: when you open the front cover, be very careful and use both hands. They are pretty strong, but they are NOT UNBREAKABLE. Good luck. Yes, you should clean it once in a while.

@@brotherhackathon9107 thank you so much it’s problem solving

Would love to see the video.