Видео

Abba make amazing engineered products. I’ve got a motorcycle rear end lift and it’s elegant how it works and very stable

I've still got the same bike, I've been riding it since 2014 or so. It's beautiful and I'm never gonna sell it. Love the Innova

My Honda vision 110 simply stops, never when I ride it, but when I stop at stops and then accelerate to leave, it cuts engine. Why? Fuel injection 2017. This problem exists for a few years, but it got aggravated this winter, and I feel that the exhaust smell is worse too when this happens a lot (sometimes every red light or slowing down and the revving high all of a sudden). I got 43 000 miles on it, love my machine. Lived in the UK for 2 years, bought it there. What could it be?

I just bought a 2010 Honda 110 here in the US. Would you know if this is more/less the same bike you have?

Some nice worthwhile mods there :-)]

mine does 86 km/h with GPS but has a problem as soon as it warms up it seems like there is no air or fuel like a half closed muffler... it loses power and stops at a maximum of 70 km/h and on climbs it is very slow. 2024 only 1940k. Has this happened to anyone?

Hey mate, this is a brilliant video! Simple, with a real example of what you're discussing. Thank you

the same model and colour that i have...

Great, no nonsense video! I have my eye on a Wave here in the Philippines which even fits the road conditions better than in the west. We are surrounded by low cc bikes here. Cars are little to no threat because they are stuck in the traffic that two wheelers can filter through. A lot of youtubers could learn from your simple approach.

Great video, super helpful thanks, I was watching for the fork seals and have them replaced now. Can you help me with the fork oil capacity for a 2014 Vision 110? I've seen values like 152, 120 & 60mm but no idea which is correct. I've put 60 in for now.

Can I put wider tires on the Honda Vision 110?Front 90/90-16 and rear 100/90-14?

Thanks for the video. My honda vision was made in 2014 and i went to the honda dealer and they told me valve clearance on my model is 0,16 on inlet and exaust +/_ 0,02. At ten thousand km no adjustment was needed😊

What plastics have I to remove to adjust Valve in honda Vision,model 2023?

Great video, what would you suggest me to do if mine bogs down and eventually turns off if I give it too much throttle? I recently did the rollers and i don't know if either I didn't place them properly that causes the bike on higher rpm to bog down. I would appreciate your take on this matter, thank you!

Great vid just done exactly the same thing with a vision 50cc last week completely changed the engine with a 2000 miles on the old engine engine was noisy just like yours with 23,000 miles on this new one runs like a dream purs like a cat and yes only a 50cc but who cares it does me great reliability and economical

Hi Sir, great channel! Just reaching out to see if you've had any experience changing the small from driving light bulbs on the Honda vision 110... I've taken the front panel off but i cant for the life of me see how to get at/change those small bulbs... I'm hoping i dont need to take the whole front panel assemble off to access the bulbs??? If you have any info I would be very appreciative!

How much torque do them need both side, front and rear?

Where is the starter motor on these things?

You must be one of the rare people who can answer me this question: what is the benefits of on and the other in comparison of the Innova 125 and Vision 110 ? Or in general, the Cub-style bike vs the CVT scooter? I've been looking at these two specific models and I'm interested in both but what bugs me is with how legendary and fun Cubs are, I can't objectively see how they're not outclassed by twist-and-go scooters in almost every way. That underseat storage is absolutely cavernous compared to your old Innova. I want to like Cub/Innova more, help me! 😄

I have the vision 110 2023 and I’m having a fault with the start stop system it’ll turn off when active but when i press the throttle it’ll almost cough the fuel pump will kick in then all of a sudden it’ll start but does it every time if I gently pull the throttle it’ll start straight away fine can anyone help? Thank you

My topcase broke and i ordered one but it was for sh not s wing and now i wonder if i can still use it but the plate to fit would need to be drilled in. I did not find any case that fits the s wing. Any link to this kappa see if i find it?

Iv got a 1991 ST1100. Excellent old war horse 🐎

just looking at head light front turn signals looks to modern for c reg dad had one 85 b plate different shape it may be a china clone made to look honda to get more money.

Why do you wear an open face.

I love it when people like you show that small bikes are capable of mighty deeds. As more macho big bike riders.......!

Put 77k miles on mine from new. Graduated to belt drive xmax and would never go back to chain drive. Tough little beasts. Loving the lights😊

Hello Simon do you have a video showing how to adjust the idle on a 2013 -110cc Honda vision....?

This engine is used a lot of vehicles in India, thanks for the information.

7years later did you get rid of it ?

Fantastic video. You are very modest about your abilities. Changing an engine by yourself in a few hours is amazing. I can only admire as like many others, I would not have a clue where to start. It was fascinating to watch.

Hey , can you please help me whats the location of eot sensor in honda vision 110 2016. I am getting a flashing engine light seven times

Make a little video on what you can do withhebike obd

It surprises me that there's this kind of scooter in Europe. I thought they're exclusively marketed in Asia, specifically Southeast Asia.

Hey man, I read carefully in the Honda service book, it's vision 110 2012 model too, it clearly said 0.16mm/+_0.002mm for both. I used the shim to make sure the accurate but the noise came out just loud & loud. Moved down 0.10, still noisy but less, moved down 0.08, almost no noisy but the engine reving became dull and more vibration. Btw at 0.10mm the engine was working good except the noisy. Don't t know what to do or I need to replace the valve/spring/???

Those locks on the givi side locks are so weak you can easily force them with you fingers. Just saying. For extra lighting, fix a usb rechargeable bicycle led light to the handlebar. It only costs £16 online and is really bright. One charge lasts 6 hours. Thats what I do on my old mz whose 6v headlight is totally hopeless.

more high less oxygen make engine lower hp

in vietnam this bike name is honda future

I’ve just bought one- can’t wait to potter around!

Hi I lost my key to my bike but my top box took the same key in my top box can i take my top box barrel out and brink it and get a new key cut thanks

This looks quite like a Future 125. Mini semi-automatic bikes like this can carry a lot more stuff than a larger motorcycle.

Got a little Honda Wave the kid that owned it previous drive it through a hedge Everything fixed but finding the from fairing for them is an absolute nightmare If you know where I can get one let me 😂

Just found your channel, love your work

2:13. Extreme honesty. RESPECT. I Chewed another Tuber off the other day for actually introducing his vid with instructions to Like and Sub. It's just plain bad manners...

lol looks like you're gonna rob a bike on your scooter

This bikes stolen now

Hi, what torque did you use for the vaiator nut? I saw you mentioned 49nm for the clutch ,but you didn't say what it was for the variator?

How many grams does 1 factory standard roller weigh on a Honda Vision motorbike

What were the bikes you sold and bought along with this nova please?

Как думаете, стоит ли ставить вариатор Malossi Multivar? Сильнее ли будет разгон в сравнении со стандартным вариатором?

Is this worth a try on mine ? Just bought 1 was sat 2 years with a dead battery, the fuel pump primes and ive got spark but just wont start its only on 10k miles, i checked the injector and the pattern looks fine as well