Видео

Cool thanks

You don’t need lights in Florida papi

You big pimpin

If you are affiliated then this video isn't fully trustworthy. Sorry

Great video. I have the AP 136. You seem like you really know this yak and was wondering if you might be able to help me with an issue I'm having? I'm sure yours is a newer model , mine is a 2021. I don't have that magnet that you show in the video on the motor. Mines in a different spot. So my issue is even if my rudder is straight, and I'm moving forward, I have to turn the motor about 4 inches to the right to go straight. It's like it's dog tracking similar to a car. I'm not using any Autopilot functions, just seting the motor straight and going forward. The motor is clocked in the right position so when it's facing forward the motor I can lift the motor and the prop comes out of the hole perfectly. With everything straight including the rudder if I don't offset the motor it will turn instead of going straight. It blows my mind. Just hoping somebody could tell me something I'm not checking right. It's almost like the bottom of the kayak isn't straight, like the keel is warped or something stupid like that. The only thing mounted to the bottom is my transducer, but it mounted up in the spot it's supposed to be. I have a video of it but I can't attach it to a comment. I'd have to email it or send it thru a text or something. Thanks in advance if you might have a thought of what it's doing.

Please hold your phone horizontally 😊

Hey there. Where did you find that mesh bag for the front hatch? Would also love to know where you got that drain kit. Thank you, Josh

I’ve recently purchased a Johnson Outdoors Old Town SPORTSMAN AUTOPILOT 120. I do like the wireless handheld remote. However, ideally I’d like to stand and cast continuously while navigating amongst the current and structure. So I was wondering if this electric motor is compatible with a foot pedal control? Being new to electric motors, any info or pointers would be great 🙏 Cheers Ryan Australia

Hey, nice video thank you for posting. I have the motor and I use it on my PA 14. It's an insert where the mirage Drive would go. The product is just OK. for the cost of this thing it's really not justified, quite frankly a trolling motor would be a fraction of the cost and probably more powerful. My maximum speed that I get with the motor is about 4 1/2 miles per hour. the battery is new so it does last for a day out on the water. overall the major problem with the company is it's customer service, which is just terrible. I probably wouldn't buy from the company again. just thought you should know before buying this very expensive underpowered motor.

those pads are a complete joke and old town doesnt even have replacements in stock

Thanks for the directions. Got my anchor trolley installed today. Would've been a miserable job without the rigging bullets.

Serious question. I noticed that you now attach your units on the sasquatch bar. Previously I think you had the unit mounted right next to you (which is what I'm doing as well?. Why the change? Isn't it more difficult for you to mark spots and use the units if they're that far out? Keep up the good work, I've made a lot of changes to my 136 because of your vids!

Are you saying that you need the extender option to clear the top of the roof? How high does it go without it?

Young Karen Lopez George Brown Thomas

Dang, I’m considering getting this… I’m gonna try my loading with a cart version 2.0 maybe Saturday and see if it works haha.

No testing that you can still still open the waterproof hatch?

damn i love my bixpy K1 its really strong💪 light weight!

Can you provide a link to the battery connection pigtail you use?

Fishing Specialties pole mount, can you provide setup info?

Robinson Michelle Wilson Sandra Miller Anna

OMG I DIDNT EVEN THINK OF THE DRAIN PLUG.. THANK U

THANKS! I used a GP8 for two yrs using external battery 5 hrs without issue. Just got a 10 and I get that error message. Couldn't figure out why I would return from a 3 hr mc ride and the battery was less than half. Just checking my 1 hr of footage today via Quik, the camera was a hot 106 degrees, and it was only on 15 minutes in my 70 degree house. Never had this much over heating issues with the GP8.

Well, it's actually 3 lights but good information non the less thank you :D

How long does the motor last while out fishing?

Where you get that blue material you have where your seat rests and the battery box area?

Thank you so much. I’m a new on her and my first two launches were painful. I have 7 1/2 to 9 1/2 foot died here thank you for showing the ramp and the excellent instruction and put it in the water. Why didn’t I think of that I’m so worried about that transducer thank you again. Look forward to seeing more of your videos.

Thank you so much. I’m a new on her and my first two launches were painful. I have 7 1/2 to 9 1/2 foot died here thank you for showing the ramp and the excellent instruction and put it in the water. Why didn’t I think of that I’m so worried about that transducer thank you again. Look forward to seeing more of your videos.

Awesome setup gives me a lot of ideas. Thank you

It looks like a really good set up My question is how much does it weigh? And how much do you have invested in it? If you don’t mind, I’m just curious

Great follow up to your other - how to load. Thanks!

Solid work!

I was jigging in the front of my boat and my Minn Kota was turned all the way the opposite direction. I also had the micro remote with that little rabbit button. I leaned over my boat slightly and the remote pressed in between me and the gunnel. It hit the rabbit button and launched me over the side of my boat. I barely held on and was able to pull myself back in. Be careful with that little remote and the rabbit feature. I imagine it would be way worse in a Yak. Great review. Liked and subbed.

How much for that and do they have a recharger ? Or only one 1 time ?

Good review, I’m in the market for a fishing kayak, I was already leaning between this one because of the Minn Kota trolling motor, I already have a full size one on the Smoker Craft boat.

What is that dual clamp you have installed on the Fischer mount plate that allows you to store the pole horizontally?

I need to look into these. Random question.. have you thought about adding the NMEA system to your yak? The garmin steadycast heading sensor is very intriguing to keep a true heading on way points and more accurate way points. I havent seen anyone try to put one on a yak and im not the most tech savy.

Nice video. I got the same for my 106 PDL. Only thing the thumb screws inside the gap of the adaptor does not fit. I can’t tight them up. They seem bigger than what you have here. not sure I am doing something wrong.

I use my gopro enduro battery charger cord,but not sure if that has anything to do with it,but even with that cord I found out I had to wait about 15 seconds or so after I plug in my power bank.I think it takes the gopro 10 time to get the p I were to the sensor or something.Im using a 3amp power pack.When I was first plugging it in I would turn the gopro on right away and it would say low power and shut off.I think it's all in the waiting before turning it on.This tes I'm 5.3k 30 l.Im at 40 min know over heat and going still.

Well, I know my next kayak now. I'm done with Hobie. I'm hoping they have some end of year deals this winter

Well, I guess you found out how poorly this product performs but I do come in on coming back on here and updating that you got nowhere near the 50 hours. Guardian angel is aware of how poorly their product performs. I’m only getting two hours. They said 50 hours is based off of using the one single LED light on top on the low setting. It’s false advertisement and I’m gonna do everything I can to bash their product. Every chance I get.

Can you turn on and off one light?

Im saving for the epdl for next summer. I freaking love these things. I saw they make kayak sail kits for all that wind. Im curious as to how well they work

Superview?

Question bud will the older 93sv echomap uhd graph pair up with the 93sv echomap uhd2 transducer as well?

Excellent excellent presentation and a quick question I plan on installing a bow mounted minnkota trolling motor on the BACK of my boat. I have a rail and other stuff in the way in the front. Obviously, if it’s mounted on the back when the trolling motor turns left the boat will go right and vice versa. But if you use ipilot and possibly a heading sensor for your tracks and waypoints, will the trolling motor steer the boat properly, even though it’s mounted in the back?

So preppy luv it😂😂😂😂😂😂🎉🎉🎉🎉

Do you have a link or model for that Captain's bridge you're using for the 2 graphs?

Great video, thank you! I currently have a Hobie but am looking into the AP, would it be possible to have you do a video on your electronics and how that is all situated including the mounts / bars you used? I have a similar electronics setup with 2 graphs and livescope / fpv hub the setup on the Hobie seems a bit more straightforward than the AP but that might just be because I'm very familiar with the Hobie.

Nice setup!

How do you fit that monster in your truck bed??