Видео

Where can I get a screen?

Hey dude, long shot considering the age of the video, but you wouldn't happen to know if I messed up somewhere, would you? Best of my knowledge, the digitiser came off clean as a whistle, none of the ribbon cables seem damaged and I've tried reseating them, and the S6 shows up on a computer when plugged in, but the screen is just staying black constantly, no video to it. Any ideas? The screen was shattered, so I had to pop it out a little rougher but didn't break anything other than glass in the process, I made sure to be really careful. The only thing I can think of, as the screen had already stopped displaying anything before working on it, is that maybe it wasn't off when I worked on it. Would that cause any issues? Nothing on the screen (old or new) or digitiser could have shorted as I disconnected the primary ribbon cable first and last in disassembly and reassembly. Thanks for the video, was short, sweet, and did the job perfectly. I just didn't!

somewhat idiotic to me

I have an issue with my Xcover pro, the screen flickers but i work without any problems if I twist the phone body slightly. Is it issue with screen or the motherboard?

You made the last cable from Dock connector to Mainboard wrong and you took off the wrong Battery. 2 mistakes in one video.

Awesome video! Short, sweet, and to the point without being vague. Managed to replace my USB port with absolutely no issues despite not having any prior experience with electronics repairs! Thank you!

How do you remove the screen if it's not broken

Hey, thanks a lot for the video. But do I need 10 clamps to hold the lcd when drying off the glue? Could I theoretically just use 8 pieces?

Great video, thanks. My USB socket seemed to have worn own after 3 years of use. But replacing it as you showed here fixed it and it charges properly again.

is this the same screen as the TCL 30 5g?

Absolutely loved the video. Amazingly clear instructions and crystal clear footage! I was hoping you may be able to offer some guidance to me if you would be so kind. Long story short my S22 Ultra took a tumble breaking the back glass and damaging the mid frame around the lock/power button. The button itself is slightky bent and the damaged area is pinching the button itself in the down position so i intend on replacing this, the bigger issue I am facing is the phone no longer makes/recieves calls. We have also noticed that when plugged in its only intermittently fast charging. We have inspected the SIM tray, tried a different SIM, checked and blown out any possible fragments of glass, reset network settings all to no avail. I am of the view that this exact fix needs to take place (plus the button) to solve my issue. What are your thoughts? Again, thanks for the video!

Worked perfectly. Thank you.

I should have known while he worried about glue in stead of box under the cam that he wasn't going to know wTh he was doing!

Bro, today the new USB port arrived, I set everything up correctly, but it's not charging. What could be another reason?

That's not the lense😑😑

done repairing mine!!! thank u

Thank you so much brother. My daily phone is now good to go ☺️👍

Good evening boss do you have Tcl screen 504 and how much

Great video, I replaced the frame and display on my s21 watching this video

ive had this tablet 4-6 years should. i upgrade?

I recently replaced my tablet screen but the s pen won't work. Does anyone know what the problem might be and how i can fix it?

Thank you very much for this very helpful tutorial. My 17 year old daughter broke the screen on her S6 Lite, and given that we home educate, we decided to learn how to repair/replace this ourselves - she has just repaired it successfully.

Where can i buy original replacement screen?

are the p610 and p613 compatible?

Hey ive got an s6 lite tablet secound time replacing it (not same device) both times when fitting new screen screen doesnt turn on when i give phone shop they sort out and screen turns on (same screen) any idea what i could try ive re inserted cables etc nothing when i charge i can hear noise etc but screen doesnt turn on

Will not applying adhesive to the back of the new board cause any issues?

me gusta el video, lo probare, el adhesivo T-7000 cual tenias? de 15ml o 50 ml

Does this apply to the T295?

what adhesive is that?

Great video and I''ll be honest, I didn't read all the comments but I wanted to note that it is VERY important that you start from the camera end with your spudger and be very careful as you work around the other end. I accidentally cut the main board to display connector on mine. The cable was like 5 bucks, but still, an avoidable mistake that I managed to make at full speed. I offer it here as a minor piece of unsolicited advice.

Helpful one

And by battery started smoking….

U put back togther different ,black strep goes over ribbons

THATS A LOT OF WORK for a 30 dollar phone

Mine broke only the glass

Use alcohol, a little bit goes a long way.

where can i get a battery for 4 xl please share a link

Hi, thanks for posting. Previously, I only found videos of the disassembly process without the reinstalling with screen. I really appreciate that you included the steps for attaching the screen. In terms of replacement, are you using IPS?

How much price of font screen?

Where Can I buy the screen from

When they say God works in mysterious ways i believe it now. Since the start of this year ive been having network issues on my s22 ultra. I googled every where and read many posts about the issue all blaming an update. I had finanly given up. Until 2 weeks when i wanted to remove my sim on my phone and i didnt have the sim tool,i used some clippers only to break the sim holder in half and with my sim stuck in my phone i pried them out which damaged those pins that hold a sim card in the phone. When i put the sim back my phone couldnt recognise the sim. Since im a DIY guy, i googled the part i need to buy and went to Sunsky to buy it,after i came to this video and read comments that replacing that part fixes network issue, 1 hour ago i received the charging port part,replaced it and now im happy my network issues are gone. 😊😊😊😊😊😊i had to ask people with cheap phones to hotspot for too long. Now im hapoy again with my S22 ultra

Thanks for you help I was able to do it. Battery was hard and sticking the power button strip back on I needed some glue. I would love if you could do some super zoom ins for some parts like attaching the antenna and also how to orient everything since the sim chip fell out and that silver piece up top too when I took it apart I spent a lot of time looking up the correct orientations. Ultimately I could not do it without this video so thank you!

Hello good day, from your previous video about samsung replacement, hello, I have a similar problem like this one. So a sharp object fell into the bottom right of the screen and needed to get a whole new phone assembly, the technician transferred the components like you did in the video but after a day or two my screen ghost touches, he replaced it with another phone chassis just to get a same outcome, he replaced it three times and my phone still ghost touches. what might seem to be the problem? My phone model is the same model in the video thanks

Hello good day, from your previous video about samsung replacement, hello, I have a similar problem like this one. So a sharp object fell into the bottom right of the screen and needed to get a whole new phone assembly, the technician transferred the components like you did in the video but after a day or two my screen ghost touches, he replaced it with another phone chassis just to get a same outcome, he replaced it three times and my phone still ghost touches. what might seem to be the problem? My phone model is the same model in the video thanks

hello, I have a similar problem like this one. So a sharp object fell into the bottom right of the screen and needed to get a whole new phone assembly, the technician transferred the components like you did in the video but after a day or two my screen ghost touches, he replaced it with another phone chassis just to get a same outcome, he replaced it three times and my phone still ghost touches. what might seem to be the problem? My phone model is the same model in the video thanks

Bro - remember to add that when taking the screen off, to sellotape It (or something equivalent) - to stop shards/splinters of glas flying up in the face. Good video. I'm just waiting for a replacement screen so I can attempt this myself. (I did get one from eBay, but they sent a black one instead of gold... so I have to wait longer again). But I am getting better. I hope this is my first project that's successful on a smartphone. I have done a couple of others, but not a smartphone in the recent models, speaking. I hope your video will spur me on to victory !

how do i know if i need to do the frame too?

Heat gun needed. Micro Torx screws. Thread lock on all of them...Care and the right tools, but it is a pain to DIY if you ask me. I got mine apart. Had to drill out a couple Torx screws.

I think the power button off the strip is gone.. is there any way to just get the volume/power button strip separately?

Decent repair just a note why did you use glue T7000 and why not strips surely strips have less to none dry time and no clamping required or am I wrong . Great job either way