Видео

How did you remove the chain sprocket from the shaft, since it seems to have a spot weld holding it in place? I have a BX2750D blower, and the top sprocket is no longer aligned with the bottom one, the key that locks the sprocket to the axle even seems bent in the key paths.

Put your throttle up all the way you will get a better cut

Thanks for the video. Have the very same mower,very happy with it.

Good video. Thank you for taking the time to film it. I am still contemplating the pros and cons of a 2120 or going to the BX which are almost the same money. I have a steeply inclined driveway and need something that can move a snowblower up the incline and have been told I need more than an 18hp which the BX 1880 has. The 2120 is advertised on Kubota's USA site as a 17hp, and the dealer has it at 21hp. Kind of confusing and stupid at the same time. Does Kubota know what they are selling or not? What is the hp on your machine? I wish you the best of luck with it and thanks again for this informative video.

I just did replace mine and it didn't work well the hybrid ceramic bearing is more better than this one

I've had this mower for 8 years now and I'm very disappointed in it. I bought a used Bob Vila Craftsman 21 in lawn tractor that delivered a better cut than this pig. The deck does not have enough lift or suction, I can run over loose leaves laying on the lawn, and this pig will not pick them up. The mulching kit is a joke. You have to remove the deck just to install the mulching kit on it. The performance of the mulching kit is not very good either. It leaves a trail of grass just beyond the discharge chute at the deck. So you have to run back over it, just to pick up all the grass. And that makes extra work a lot. I have a Bob Vila 21 horsepower Craftsman ride-on mower that that I paid $800 for off of Craigslist , and I also got an aerator and a Lawn Sweeper for that price , it delivered a better cut than this mower. The deck, also leaves a row of grass in between the deck blades that the mower will not cut for whatever reason. I've tried everything to remedy this, new blades, different blades, leveling up the deck, but to no avail. the only reason that I bought this mower was for the Glide steer or four-wheel drive capability, but in hindsight I should have gotten a simplicity or even a zero-turn.

Just saw this tonight but had to reply. My BX2750D snow blower attachment (which looks very much like yours) broke in exactly the same spot. We took the unit apart and replaced the shaft for about $100 but it was a pain to do it. Shear bolts? Yes I was using genuine Kubota shear bolts properly installed and they were intact. No clue why that shaft broke.

Why didn't your sheer pins brea? Is your auger seized to the shaft? You should coat your shafts with anti seize to prevent this in future. I see this with walk behind snowblowers. The augers are sometimes seized to their shafts because of rust.

So it's difficult, complicated, pain in the butt. Looks like he did a great job, You got to want it. Two hours out of the year (on off) seems to me it would be worth it. Option 2 pay someone to clear your snow. Great job man. I've been looking at these machines thanks for showing us how to install the snowblower and take off the deck.

shes built pretty solid and and tough

Still happy with everything now?

Canada, upper U.S. Midwest? ("aboot" - about, "oot" - out ...)

Hard to believe Kubota makes something this difficult to install. I hate JD, but at least you can drive up to it and put it on easily- what junk!

love my tractor made a cab for mine

Great video! I just purchased a GR2120. I especially like the block heater! How do you like it? Is it a genuine Kubota Block Heater? Is it easy to install or is professional installation recommended. Any advice/suggestions are greatly appreciated!

I really appreciate this video, since I've been considering buying a GR2020 to replace my old Cub Cadet 129; however, I have to admit that after watching this, I'm not sure I want the Kubota. Both disconnecting the mower deck and (especially) hooking up that front hitch assembly does not look like a simple procedure at all. My Cub is a snap to attach/detach both the mower and the front snow blade. Unfortunately, the local Kubota dealer does not have any of this equipment to show me - only the tractor with mower deck currently attached. I'm a bit discouraged after watching this. Terrific job with the video though!

Was HR sensing accurate?

What is the little trailer you have that you have the sprayer attached to? Do you have a link to that at all?

I am still considering the GR2120. Thanks again for the great video. My question is......I know it's hydraulic lift......does this tractor/snowblower have down pressure? thank you!

I also bought the Chinese strap and it does work OK. 2 months without problems 4-5 days a week.

Update? Would you buy these again? I am overdue for some bearings in my ec90 wheelset. Thanks for the video!

Still working ???

I started to get one of these. But I decided to buy the Kubota Z411KW-48 inch zero turn. Real nice mower.

Does it still work?

Nice looking machine. Sounds great!

Buying a kubota watch this ruclips.net/video/q8Sf82FXIcM/видео.html

hi, how u find the jockey wheel? i personally thinking of buying it. wonder if there is significant improvement? pleasedto hear from you thanks

Belt changeruclips.net/video/WRaQI_BtW9s/видео.html on gr 1600

Hi, I'm glad you shared your thoughts about this Chinese option and would like to hear if it lasts after a couple months of regular use.

sorry, to unbolt the disc calliper is a massive disappointment. i had the same problem but return the tacx neo. i expect to go riding, come home, take rear tire off and mount on to the neo. no chance. a huge disappointment that tacx, for their 2017 have not adapted to the bike industry norm. not your problem, just a frustrated ex-client of tacx.

I'm wanting to purchase Yoeleo wheels with 350 hubs but I'm not sure if I will be paying that extra money for counterfeit 350 hubs or the real thing. I guess you have no doubt those are original 350 hubs?

Does it come with an american outlet plug?

Thanks for the video. I am about to purchase a 2120 and snowblower and was wondering how difficult it would be to install. From what I could see with your video.....it wasn't too hard to take deck off and mount blower? I was wondering about how long it took? Any comment is appreciated

On my road bike, Cube Attain, the disc brake caliper is sitting tight to the Neos plastic body. I'll move it away to be sure not damaging anything. The same for the long rear derailleur or derailer, it is very close when using the largest cog.

you have a link to buy them??

Just to add a comment the only thing that I have found is that foldable tire do not last as long on these wide rims. I am using continental GP4000 25mm in width and I got ~ 1,500 before the tire blow off the rim.

I am amazed how well these bearing spin compared to the factory ceramic. Well worth the investment for $20 per bearing from over seas.

just add another update, the bottom bracket bearing are still in use and have another 3,600 kms on them. I did take them apart and clean and regrease them this year.

Watch the second video because the pre load was too high in these version

I am on year two with this machine and I have not experienced difficulty.

The Bottom bracket is in year two and has ~ 10,000 kms on it.

thanks for this video. I've been wondering about these bearings. Is the BB still holding up?

just as follow up, I got ~ 7,500 kms on the jockey wheels and worm the lower one out. I am looking at new ones from overseas because I expected them to last longer.

Would you recommend this for lawn painting?

Currently at 6,700 kms and still working perfect.

I'm looking at buy one of these. Im goning buy a bx or b tractor later. I found a dealer, I can get one for 8795.00.