Видео

It really is! But there was a comment I just replied to that had said the years and makes of ones that would work. I havnt verified but it’s worth a shot at a local pull a parts. Best of luck. Thanks for watching!

Oof that would be a crappy way to start the day haha. Hope the video helps. Thanks for watching!

I believe I got this one from Amazon maybe rock auto. Sorry it’s been a while. Thanks for watching!

Hey thanks for letting everyone know! That’s some really good info for people that want to save some money. Thanks for watching!

So the swirl control valve is a different part but it’s pretty easy to get to on those cars. I would change it out first because it could be that as well. Hope this helps. Thanks for watching!

@@JunkyardJunkie okay, I also have another question, so one of the codes is for the actual swirl control valve the other is for the” swirl control valve solenoid valve” which should I replace? I will say I realized my swirl control valve was not plugged in & so I plugged it in but it’s still doing the same thing. I also read there’s a “switch” sensor too. Any idea where I should start?

I’m going to be honest with you that sounds like more diag will defiantly be needed. Best of luck. Thanks for watching!

@JunkyardJunkie found the problem and turns out it was a bad alternator and the battery was running out.

I wish I could remember of hand but I believe it was 4. Best of luck! Thanks for watching!

Ya they can get absolutely absurd on pricing. 6k is ridiculous. Remember if I can do it you can do it. Best of luck and let me know how it goes. Thanks for watching!

Glad I could help! Thanks for watching!

Haha good to hear. Glad I could help. Thanks for watching!

It had a decent amount miles it was 200k plus I believe. At 130k I would do a smell and visual check it should be fine to change. But always give it a small check before hand. Most cars and trucks you can still change it even in the 200k-300k unless it’s a dodge 😂. Thanks for watching!

Haha glad I could help! Thanks for watching!

@@JunkyardJunkie subscribed

That’s awesome bro! Good job I’m sorry your dad didn’t help out. but hey feel proud of your own accomplishments! Thanks for watching!

and when i put it in 4 high i don’t hear no clicking noise only hear it when i go too 4 low and back too 2 wheel drive

So it does sound like you’re having issues in the system. follow along with the video and diagnose it this way you don’t waste money on parts you don’t need. Hope this helps. Thanks for watching!

Glad I could help! For the rempte follow my other video: How to program key fob (05-14 Ford Mustang) ruclips.net/video/UtitFLSuJpA/видео.html Hope this helps. Thanks for watching!

Thanks for another way to look at it

Thanks! Glad I could help. Thanks for watching!

Glad I could help! Thanks for watching!

It was I go on close to show that it was. Plus it was in line after the revolutions as well. Hope this helps. Thanks for watching!

Glad I could help. It was getting stormy so I wasn’t able to put it all back together on film. But you should be able to get it all back together going in reverse order. Thanks for watching!

That’s true this car didn’t have it on. Thanks for watching!

You could also use a ratcheting wrench. Hope this helps. Thanks for watching!

And see that’s what I’ve always been told. I know it’s super popular to swap them into plenty of cars with a ton of tune ability. But, I don’t know what’s going on around me I see so many go bad and wind up not having compression so idk haha. Thanks for watching!

That’s what I’m curious about too!!!

Same model

So good news bad news. Unfortunately I don’t think so. But, good news is I have made two different videos that will work on yours. Here’s the link: How to add Bi directional remote start to your F-150 (Full install) ruclips.net/video/5sH2aq6yHlo/видео.html How to install a remote start to any vehicle (FULL GUIDE) ruclips.net/video/8ZN2LULktpk/видео.html Hope this helps. Thanks for watching!

Glad I was able to help! Thanks for watching!

This could be your issue. I would give it a try first it just hasn’t happened enough yet to trip a code I bet. But it may need more diagnosing. Hope this helps. Thanks for watching!

Glad I could help! Thanks for watching!

Not sure but if you take it out you’ll see if it has bulbs. If not it may have small SMD lights that have to be resoldered. But most use light bulbs. Hope this helps. Thanks for watching!

The climate controls have 4 bulbs. #74 worked for mine. You have to take out the glove box, center console, vents and radio…and then part of the controls. Paul in Perth made a good dashboard video. Then I made one, too.

Glad I was able to help. Thanks for watching!

That’s correct this way won’t work. But if you look on my channel you’ll see a video for a bi directional option that works and is a much better upgrade. Hope this helps. Thanks for watching!

Thanks a lot of time went into it. Glad I was able to help. Thanks for watching!

Yes torque to yield bolts always get replaced. Never reuse them. Hope this helps. Thanks for watching!

It has a timing chain. Hope this helps. Thanks for watching!

As I said in the video it works on xlt and above. If you want one that will work with any I have a video to a bidirectional remote start that would work. Hope this helps. Thanks for watching!

Thank you! I really appreciate it!!!

Hi, there was not a thanks button on the steering wheel retro vid, but I improvised.

Haha very smart! Not sure why there wasn’t one on that video. Enjoy that nice new steering wheel!

I’m glad I was able to help! Donations are always appreciated but please don’t feel pressured too. If you do though there is a thanks button under the video near the like buttons. Thanks for watching!

Hey sorry for the late response. But so your IWE’s are fine. Now then yes line in the middle is what send vacuum down to the hubs. If there’s no vacuum there check the bottom hose and make sure there is vacuum there. If there is then you will need to replace the solenoid itself. Also in the video I show to switch from 2wd to 4wd and you should hear the solenoid click. (Clicking doesn’t mean it’s good but is usually a good indicator) so first do the step above and see where we are at. Hope this helps. Thanks for watching!

It’s a ground. Hope this helps. Thanks for watching!

Alldata service manual. Hope this helps. Thanks for watching!

Torque wrench. Thanks anyway

Glad I was able to help! Thanks for watching!

Thanks! Glad I could help. Thanks for watching!

If I can do it you can do it! I’m glad I was able to help you though! Best of luck and let me know how it goes. I buy mine from American muscle usually. Thanks for watching!

So any will work and be able to use cruise control. If you want radio functions you’ll want one that looks like mine. So if you want to just cosmetic then any will work. Hope this helps. Thanks for watching!

@@JunkyardJunkie appreciate it the info 👍👍👌🙌

Glad I could help! Thanks for watching!

Yes it’s effected an absurd amount of cars form the 90’s all the way up till around 2018 I believe. Ford will have someone come to your house for free to replace the airbags. Hope this helps. Thanks for watching!

@@JunkyardJunkie appreciate the time out of day to help me and leave the comment💪 I’ll check the vin number and see if someone did the recall already🤯 I knew it was a isssue but I didn’t expect it to be something like that that could get you working on it not expecting

Oof ya now that is rough! Good luck! Glad I could help. Thanks for watching!

The repair manual doesn’t say that it’s needed. Hope this helps. Thanks for watching!

Удачи. Дайте мне знать, как идут дела. Спасибо за просмотр!

Did you put the new one on already? It should be hard to pull down the first time putting it on. You leave it locked down for about a week in the sun and it’ll become easier. Now if it’s too tight you may have to pull it back off and give some slack. Hope this helps. Thanks for watching!