Видео

Try this on the same engine in the cars.

Just to give you a translation of those Chinese words on dials. Left speedo, if you pass 40, it wishes you a safe trip, hence the words are " nice guy, hope you are safe for life". Giving the video is about the dodgy brake, those words are just what the driver needs. Right one is the electric charge dial, red is the charging zone, green is the running zone, words in centre means "Green, environmental friendly". Google translate sometimes is as dodgy as that brake.

Hello, where is the plug from the generator? I have fz8s abs and don't see a plug under seat. It is under tank?

Hello. How big was your millage or km during?

My bikes the same I have 3 cross head pilot screw and 1 slotted why is this is this ok and the one slotted is leaking fuel so needs new seal

Had the problem on a C class W205 (2015) and a Vito (2016), both occuring around 210k km. Cleaning the seef, like done in this video, solved the problem. Very happy with videos like this one!

Great! Your channel and explanation is much more thorough than that of Obsessive Engineering's channel, they explained but left a whole lot out compared to what you have done and said. Thank you, much appreciated.

You win one subscrition from Portugal, good job my friend. 👌👌

Cheers ...I've done this 30 years NVQ QUALIFICATION

I know this is an old video but i have an "uprated" M32 in my facelift mk1 petrol insignia. I have an off throtte whine in all gears, goes away when on throttle and in neutral. Havent noticed the gear stick moving. Is it most likely this issue that I have.

Mate you sound like Billy Kimber 😂😂 very helpful video, thanks for the content

That battery Is memory or start stop???

Loved you as Ironman !

Hi thks for the video. It's very informative. Can you please give us a feedback on this repair? Is the gearbox still running without the shiming?

These occupancy sensors are to detect the weight of the person and if they are under a certain weight, I believe 40kg or empty, then the airbag won't deploy as it may cause harm to the person. Above 40kg it deploys. Someone under 40kg probably shouldn't be in the front seat. But the quick and cheap fix is buy a bypass dongle for about £8 via eBay which plugs into the connector under the rear of the seat (instead of the occupancy sensor connector) to basically tell the car there's someone sitting in the seat. As long as you can reset the airbag light yourself or have someone do it, then problem solved.

Great to see you don't always need the specialists to fix your life... all you need is someone willing to teach and someone willing to learn and have ago. Great video mate

Hi I have a Porsche panamera 3.6 petrol I have p1372 valve lift control bank 1 and p0421 primary catalytic converter bank 1 inadequate effect, Need need help asap thanks

My Mrs fiesta went into low boost and engine light came on the dash, took it to ford they put it on a diagnostic test and said it had this n that wrong with it. Took it home had a check around and took out the plastic nozzle on the vacuum pump and it had a split rubber, £12 from eBay and car is now running perfect again, quick simple check to undo the plastic vacuum nozzle to check.

Changed this on my 991.1 didn't resolve the issue. Move on to coil packs?

Synthwave music in the background, instant like

you do not need to program if you buy new and teach calibrate

Encontré el purgado fácil en la indian espero te sirva mi video ... un pequeño detalle que también me hizo batallar saludos ..

ruclips.net/video/L2DpojQFlSA/видео.htmlsi=CIKYg6J8oEr4sMDR

GREAT!!!!!!!

Thanks for showing us!

🏍🔝🚀👍

You will soon know if the pump works in my case 2005 it rises up to normal then drops slowly down around 5 hours time this video helped me find the leaks and fix it with help from Johnny Hotsur GT on the 6speedonline forum Thanks for your video it will help alot of Bentley Owners as this is a common issue for them...Thank you

Well done for working out how to work on this quirky little car! Rear brake cylinder seizing is very common on the M3W due to corrosion. When fitting the replacement cylinder, it's a good idea to smear some red rubber grease around the piston ends (under the rubber boots) to help prevent reoccurrence.

The crank pulley have a specific position for . I mean rotate in some position? I changed the seal 2 times because bad seal...with first seal engine run perfect balanced but leak seal... second seal no leak but engine vibrates a little but annoying...

Great work Mel. Makes you wonder why glow plug manufacturers don't make the plugs with slots ready cut in the threaded part? A friend just took a Ford Focus to be serviced, and the mechanics managed to break off all four glow plugs that they said needed changing. They now want an extra €1.200 to make good their work which they'd quoted €400 for. Do the glow plugs work every time you start the car? If not, with winter temperatures here rarely going below +5 degrees C, then perhaps they don't need changing as often anyway? Wish there was a local Mels Motors here!

What engine code and motor is?.

Hello there i have a truimph 800 but its kilometer has broken and in my country is impossible that i buy find it so could you say me how can i start it without kilometer please i will wait u

Do you know the angle torque settings for the camshaft sprocket bolts and crank pulley or did you just wang them up?, I’m doing this job soon on my van so want to get it right🙏

Also the first clutch fiction plate behind the pressure plate is offset one tooth in the clutch basket. I'm unsure why Yamaha do this however I think this was missed in this video. If you check the before disassembly & after assembly. I've now done this job now a few times.

You should never ever use engine flush on a ecoboost! The flush will rot the belt VERY fast and block the oil pickup pipe! My heart sank after a great video explaining the vacuum system issue, when you said you flushed the engine! Also the vacuum pump is fine, its a diaphragm in the black bit you put the vacuum pipe onto the pump that fails. A £5 5mm external non return valve inline on the pipe will fix it.

If the compressor is at fault, why doesn’t the rear do the same?

GD... What's the timing order, and if u have to do a change of head joint, do the engine have to be taken down ????

Your video manual saved me. Thank you very very much. Great work 👍💪

Hi where are u based

Hi, is this a 2019 model or from another year?

Is that a diesel car or petrol

Massa 👏

10/10 video! I want to learn as much about my Fireblade as possible and this goes to the top of the list!

Impressive bit of tech repair. A bit beyond my skill set, though. My wife's 2002 has a bad fuel gauge and the info display has lost segments. Really sad part is that we haven't really used this car since 2015, and at that time everything still worked perfectly, but the wife didn't want to sell her "little car", as she only drove the Ford Explorer. Keep the car in the garage. Trickle charge on the battery, once a month drive a few miles then back into the garage. Once a year state inspection and renew registration. Fuel gauge failure was five years ago, but the info screen still showed miles to empty. Now the info screen is essentially gone. Two lessons here. One, if you don't use a car, don't keep it. We could have gotten a decent price if we had sold it in 2015, but now the dash will scare people away and probably cost as much to repair as we could sell it for! Second lesson: Don't buy a product of Volkswagen-Porsche-Audi. My 2000 Subaru with 235k miles still runs perfectly. Everything works.

Im an Agricultural mechanic Chains on cars might not stretch but chains on a forklift lifting masts do stretch as we have a stretch gauge for when we service the forklift to make sure its safe to use so i know it has nothing to do with timing chains but yes you can stretch a chain .

Is there anyway to remove selector bell housing with taking apart gear box?

Hi what brand of solution do you use on these carbs as i have a similar issue amd need to clean the carbs but dont wamt to buy anytuing to corrosive thanks

What length fasteners did you use? I think I am going to use M7 x 1 length 20mm?

Can someone please tell me when the timing chain needs to be changed? is there an interval?

Hey, can you Tell me which Tool you used to hold the Clutch?