Видео

The manual says 3.6 if changing the filter. And 4 if completely dry. My bike took 3.5 after oil drain and new filter. Lol I guess that extra 400ml are hard to get out

Good job, might want to do one on cleaning that positive battery post next.

thank you... Where do you get the oil plug, and what type? Also, what oil filter socket are you using?

How many litres normally you put in the engine

What about the final drive?

What size for washer?

THANKS. Did my son's bike

thanks man

The manual says to add .74 quarts. If you add .74, why would you worry about the check bolt?

Would this work for a 2019

12 mm right side for the drain .7 qts or 662.447ml or 22.4 oz (us) You're welcome

I thought the oil level needed to be in the middle of the stick....not at the top of the limit line.

The secondary drain plug in the back.....why did you take it out? Not one drop of oil came out.

amervoyassoc.org/Documents/manuals/2009-10_voyager1700_service_manual.pdf

So you can use ANY SIZE of hex wrench, Right? You're so good at teaching. Disliked.

Thank you. Very well explained and shown! The best I have seen.

very helpful

So I’ve done the 600 mile oil change and I’m about 5600 miles in. It’s recommended 8000 miles before oil changes but my oil level is at the bottom line. Should this be normal or is it burning through oil?

I don’t believe you are correct about screwing in the stick to check it . The X to me means to filled . You want to be right below the X .

thanks dude

Thank you

Thanks from a fellow Eagle laker :)

What size is the oil filter socket?

any idea where to find a replacement fairing? my back fairing was cracked and id like to replace it asap

Excellent Video

And jack up front of golf cart to drain all old oil out

Bro needs more then 394 likes cmon

Hello, I live in Turkey. Everyone here recommends me to use semi-synthetic oil. I am in favor of using full synthetic. Will I encounter any problems? I am a crf250l user. The oil I want to use is Motul 7100 10w30. I would appreciate it if you could give me information, thank you.

Where do you get those crush washers from? In canada

Website needs updated. You can not select a Vaquero.

Where do you put the oil in?

You cut to filling it without explaining that is on the other side of the bike so I was really confused for a minute until I realized the bike was flipped in that frame and walked around my bike and saw it. 🤦‍♀️🤣

Thank you kindly ! So useful

Very helpful have the same exact bike thanks for the demonstration

Can you tell me about the Seat Concepts Commuter seat? Did you order it straight up or are there custom mods to it such as additional height or what not? It looks higher in the vid and I’m tall but looking at this specific seat. Thank you.

Good clear instructions! By the way, I would have bought another new ZZR1400 Performance Sport in 2021 but thanks to the gnomes at the EU the last model we have was 2019... UK isn't even in the fucking EU!!

my bolt is stuck nad starting to look round, Why do I never use torque wrench 😭

Bro! 2.5 quarts is not correct. Even look at the manual. I put in 2 quarts maybe another ounce or two at the most with a filter change.

Great vid! Do you happen to know what size crush washer I need? It seems to be M12 1.5 from what I've seen, but it's hard to source an accurate size on Amazon.

You should remove the dip stick before draining the oil so you get better oil flow

Does changing oil on the ramp leaves significant amount old oil in these Subarus?

You check with the bike level correct?

You're the only and i mean the only youtuber that made a video on this for this bike thank you

You should be using a torque wrench.

Why are you guys out of stuck? I can’t find a oil change kit for my 2023 klx 140rf anywhere

This car with 2.0D engine wants just a quarter of an inch above the empty to avoid DPF issues

Great watch, but why no dipstick ???? First bike I ever had without one.

Thank you for the instructions! It was a piece of cake after watching the video.

that oil looks new.

2 stupid questions: 1) i assume you fill in the same place you check the oil? 2) when you say you "fill" the filter with oil, how much really?