Видео

Ran out of gas while working. Put gas in but pull chain locks up and won’t pull. It’s 6 months old. Plenty of oil. Since it’s new I didn’t check spark plug. It’s also turned on. Any help would be appreciated

유체가 나가는 방향의 반대방향으로 핸들이 향해야 하는거 아닙니까?

Bullshit issues is why EGO, Ryobi etc are making electric mowers/pressure washers etc. Nobody has time to fk around with something you just used wont start now.....

Hey man, good video. How do you go about figuring tax into that?

Instructions unclear, my wife is now pregnant.

Thank you. Will try all you said.❤

Great video thanks

A rotary is what you need...it will get the job done way faster

I would either re-make or heavily edit the video. Running the engine without water in pump isn't good, even with a little pump protector in there. Run engine first, then winterize pump.

What else can I try, I've done new plug, new gas, changed the oil, when I try to start it I can smell gas, I had the water going through it.....but I'm lost

Mine is brand new out of the box, and the pump does not draw soap solution. No build up on the ball or spring in the valve. Doesn't make sense.

Now yes this works but I just need you guys to know he's teaching you how to call him in 5 years rather than 10

Who made this stupid video?

I found this video exploring why the electric 2500 PSI Greenworks GPW2500C pressure washer with a triplex pump is about twice as expensive as it's non-commercial cousin, the 3000 PSI GPW3001, that has a cast aluminum axial cam pump. It looks like the pump is just that much more expensive. What's unclear is why it's rated 500 PSI lower than the non-commercial version when you mention that triplex pumps typically run a much higher PSI than that. It's also only rated for 1000 hours and does not require maintenance. The PSI, lifespan, and serviceability all seem to be in contrast to what you mention about this type of pump.

Silicone grease is only compatible with non-silicone o-rings! If you use silicone grease on silicone o-rings, they will absorb it, making them swell and become fragile.

I believe that 30 second cleaner is not approved for pressure washers. If any if that gets in pump it will damage the pump. Even with suction I still get concerned about damage.

Do you have problem starting it when the engine is hot?? Once its starts it runs forever!! When you shut it off it is hard to start it again!!!

I have this same engine and after using it for a while shutting it off it is hard to start it again why is that help!!!

Very informative video, thanks for sharing.

Nice job. Thanks for the video.

Terrible sound quality!

Bleach, regardless of where you use it, regrows mold. I understand it will get rid of it, but it doesn’t protect it from regrowing. I learned this through cleaning my house over the years. Vinegar will keep mold from regrowing for longer! Just a tip for anyone watching! Great video! & my comment isn’t judging you or your experiment, just spreading knowledge!

You never cleaned your brush between tests. You used Dawn and then Dawn and Zep and then finally Dawn, Zep and bleach. Not exactly a scientific test.

Has to be be junk

Just got mine

If I’m using my pressure washer and hoses strictly for washing my car and then putting them back in storage, is it necessary to oil or lubricate the threads and O-rings at all? I have literally been researching this for over week staying up late hours and I still have no idea. Seems like silicone is needed for the O-rings but is not good for the metal on metal threads and the lubrication needed for the threads can dry out the O-rings if it contains petroleum so I’m stuck.. I’m using stainless steel quick connects that have viton O-rings in them. A Flexzilla garden hose, Uberflex pressure washer hose and mtm wand.

Can you get a longer hose?

Thank you for video info and subtitles!

Hi! Have someone use GRX engines? Is good?

Them Simpson are garbage wait untill you have a problem need help from Simpson good luck they screwed me I’ll never use anything Simpson again horrible company ripping hard workimg people off warranty what warranty the fake one they say it has

HI I have Wilks USA TX750I, engine is fine its just something with the pump or pressure. machine is new never used. I have seen several videos about errors and troubleshooting but nothing has helped so far . anyone has an idea regarding pressure , pump , etc >? thanks

I've used krud kutter for several years and have yet to find issues like you showed.

extremely helpful, thank you!

That sounds like the LG compressor

That was the most dumbest video I have ever freaking wasted my life watching. Thank you for that uninformed sounds of bullshit.

You misssed out on how to connect the red hose , I am having trouble with the connection!

Thanks

Thank you

I used 30 Sec cleaner on my old deck and it looks brand new now. Great stuff!

Thanks just what I needed

If you don't mind me asking where I the serial number on this thing I cannot locate it

Great video thanks for sharing 😀Made my work easy.

The CRX is clearly based off of the GX design, at least in the single cylinder but it's not just CRX engines, Briggs and Stratton with its CR and XR engines, Kohler Command Pro single cylinder, Champion engines, LCT and PowerMore (MTD family) engines are all based off of Honda's GX design. Honda designed the engines, everyone else just used Honda's expired patents and made their own.

I believe the first one is an “axial cam” pump and the second one is an “axial piston” pump.

same issues attaching the wand holder and lost a nozzle because it wasn't seated. Good review

Use a Tennis Ball in the trigger and just hold the wand with 2 hands. Save the finger and hand fatigue

what % of sodium hypo-chloride in bleach? (5, 7, 10, or yikes 12.5??) higher the %, the more and more water dilution becomes necessary...otherwise too "hot" to burn skin, and permanent damage to end product and plants,😥 etc.

That model is a POS ... I realized the problem with it today , crappy design... Cold start , cranks 2nd pull ... After engine is running temp or ran for awhile , 100 pulls & no start ... What happens is the gas was almost at a boiling point & causes it to vapor lock ... The Simpsons with the Honda motors start every time you pull it ... I wouldn't recommend buying this model on the video...If you do , you'll regret it just as I did ....

30 second cleaner is KING ONLY PRODUCT WE USE FOR MILDEW

I appreciate the clear explanations.