Видео

Thank you man! Yes absolutly! These motors are perfect for this build in my opinion 💪💪

@@SUPERBAFFOFpv awesome, I have built it with 1804 3500kv and planning to swap it with 1606 3750kv. And use 1804 on a cinebot30 build.

@rainbowrunner1136 I think it is very difficult to find the right motors for a 3 or 3.5 inches build. Infact I build a 3 inch drone too but the choise of the motors was not so good. I was lucky in finding the right motors for this build. They are perfect for me 😄

Thank you i appreciate a lot 🙏🙏🙏. Nope, i've never used throttle expo. As for the rates, they are very subjective. I'm still using betaflight rates and not actual rates. Rc rate 1.10 - rate 0.80 - rc expo 0.14 ✌️

@@SUPERBAFFOFpv Thank you

Hi! This is the link (you have to choose the right hole depending on the screw you choose): a.aliexpress.com/_Ev97VJX

@@SUPERBAFFOFpv YES I BOUGHT THE SAME BUT JUST WITH ONE LEG WITH M2 HOLE ITS PERFECT FIT IN ORIGINAL CRUX MOUNT BUT ITS NOT A PERFECT GRIP .

@KasparasBU i don't use the original mount, i have a friend of mine with a 3d printer and i found on thingiverse the right file for the crux35. It's very easy to find on thingiverse, but you need a 3d printer

For sure that cam has mounting holes. It was a very easy mod 😊

Ciao! Penso che se vuoi un drone gia bello e fatto il crux35 sia ancora tra le migliori opzioni, anzi sicuramente se volessi un 3 5 pollici riprenderei proprio lui. È una scheggia ed è molto leggero, consuma molto poco la lipo (cioe dura tanto la batteria), e se gli metti una thumb pro sopra fai anche dei video belli. Te lo consiglio si. Io vado con lipo tattu 4s da 650mah 💪

I put an elrs rx on it 😄. It is not a very easy mod because you'll have to take apart 2 motors and flip the fc to solder the new rx. But it is way better than the original frsky... mine too had this problem of rx loss, that's why I decided to go for elrs!

I don't understand maybe. This is a 4s drone not 1s

Thank you very much 😊. I really appreciate your comment! I will for sure continue to fly my crux35 💪 and I hope to see you fly very soon!

I don't remember exactly the settings I used but please note that I changed the original rx with an elsr rx. Just check in the betaflight osd tab if there is the link quality setting and select it of there is one.

Hi! Thank you so much! Yes with this cam you have to stabilize the flight in post using Gyroflow. For freestyle flights I use a very light stabilization (whit gyroflow you can choose the strenght of the stabilization). The more you stabilize and the more it crops the image

Hi thank you! This was one of my first flights with a 5 inches drone 😁. That camera was a gopro hero7 black, very good camera but now I prefer the dji action 2 for freestyle or fast cruising videos ✌️. Runcam thumb pro is a very cheap and good option expecially for smaller drones if you don't crash a lot 😄

La vtx è scritta in descrizione cmq la hglrc zeus nano che ha il microfono. Il cambio di connettore con xt30 è quasi obbligatorio su questo drone. È la modifica che ti da i migliori risultati con il minor sforzo. Chiaramente devi comprare le lipo 2s dopo 😁

Oh man thank you very much! I use tattu r line 550 mah 2s. Please note that i changed the lipo connector with an xt30 connector. It is waaaay better ✌️👋. You can go even with a 450 and a 500 mah 2s lipo. The 650 is a little heavy

Yes it's a nice place to learn. But a little small for 5 inches drones. Thank you as always 🙏👋😊

Ahahahah in che senso come fai? Con l'allenamento. Mi spiace per il tuo! Cosa si è rotto? Anche a me nel tempo si è rotto qualcosa, ma sempre sostituita e ora vola ancora 😊

@@SUPERBAFFOFpv in vari crash si e rotto sempre di piu e oggi spezzato il telaio del tuttto, io nn riesco a imparare i loop e altro, come fai a cordinarti cosi bene? Cmq mi servirebbe sapere il telaio del 2 è compatibile con l 1? L 1 non lo vendono piu il telaio spare

@El_Muffy no purtroppo non sono compatibili telaio 1 con 2. Se sei agli inizi è normale che non riesci a volare cosi. Io ho iniziato con un simulatore (liftoff) e ogni tanto lo uso ancora per provare i trick piu difficili senza distruggere niente 😅.

🙏🙏🙏🙏🙏

Grazie assaiii 🙏🙏✌️

Grazie come sempre!! Preferisci piu questo senza tagli o l'ultimo con tagli ed effetti?

@@SUPERBAFFOFpv penso sia decisamente soggettivo, a me piacciono molto le volate integrali ma magari non riesco a guardarle subito o completamente. Ma anche il video con effetti è tagli e parecchio d'impatto e più immediato. Forse ci stanno entrambe le versioni 👍

Grazie mille per il feedback! 🙏👋

Grazie milleee Gerardo! 🙏🙏👋

Thank youuu!! Really appreciated 🙏🙏🙏

@@SUPERBAFFOFpv you are welcome!! Cheers! 🍻

Grazie milleeee! Su questo drone uso lipo 3s tattu r line da 550mah ✌️

Oooh merciii 🙏🙏🙏. I have others more recent tinyhawk flight in my channel if you like this drone 💪💪💪

🤣🤣🤣 why 25mw vtx? What vtx is?

Thank youu 🙏💪

Thank youu 🙏🙏🙏 I really appreciate you like it 😊✌️

@@SUPERBAFFOFpv of course, keep it up! You are welcome!✌🏾❤️🙏🏾

🙏😍🙏😍❤️

❤️❤️❤️ grazie mille Fede!

Hi. I use lipo tattu r line 4s 650mah

@@SUPERBAFFOFpvthanks very much mas bro,,,,

Tu sei il top! Grazieeee 🥰🥰🥰

Nice bro 😂

@@holefpv_GameOver so ragazzi 🤣🤣🤣

@@SUPERBAFFOFpv

Thankyou! Tha camera mount I use is from aliexpress, phisitall shop, it is the best for me. You just need to choose the size of the hole but it depends on the mount you choose (i 3d printed a crux35 mount for a gopro from thingiverse)

Thankyou! Wow 2.5w vtx you'll go to the moon! 😝 please let me know if you'll find a way better range and penetration with it

@@SUPERBAFFOFpv i mostly use expensive antenas that helps alot

@pringlerhere yeah me too. But i never know if it is just a placebo effect 😄

it helps from 10% to 15% i tested @@SUPERBAFFOFpv

Ammazza Fede così mi fai arrossire! ☺️🥰 Grazie davvero tanto sei troppo gentile, anche se di strada ce n'è ancora tanta da fare! 💪💪

Ahahaha vero! Diciamo che questa volta li ho evitati bene sti ferri...fiuuuuu 🤣. Grazie! 🥰

@@SUPERBAFFOFpv

Graziee son contento ti piaccia! Allora questa è la runcam thumb pro e in post con questa camera hai la possibilità di passarla su gyroflow e stabilizzare il video. Ma ti assicuro che è gia superstabile di suo su questo drone e con questa stampa 3d che ho preso su aliexpress. Infatti su gyroflow ho fatto una stabilizzazione davvero minima, piu oer correggere la distorsione della lente che non per stabilizzare

Ciao! Allora il race è 2 pollici se non mi sbaglio, mentre il freestyle è 2.5 pollici. Chiaramente con 2.5 pollici è un po meglio perche hai piu portanza. Poi il race ha la lipo che si mette sotto il drone mentre il freestyle ha la lipo che si mette sopra. Con la lipo sotto si fa piu racing che freestyle (chiaramente puoi fare mosse da freestyle anche con una lipo sotto) ma hai una sensazione di volo diversa e io preferisco la lipo su. Diciamo che anche se il tinyhawk race è un ottimo drone, io riprenderei ad occhi chiusi il tinyhawk freestyle ✌️

@@SUPERBAFFOFpv io ho appena iniziato coi droni e sto usando un tiny hawk 2, te guidi molto bene, impari prima sul sim e poi passi al reale o impari direttamente col drone vero a rischio crash continuo?

Un altra domanda.... come fai a riprodurre il suono? Lo registra il drone ? Ha il microfono? Il mio non lo fa

@@swimbeyonder ti ringrazio. Io ho iniziato con un simulatore (liftoff) ma appena ho iniziato ad andare disinvolto sul simulatore non l ho praticamente mai piu usato se non occasionalmente per provare qualche trick di freestyle particolare. E non ho mai usato la modalità stabilizzata, sempre e solo acro. Ti consiglio le stesse cose. Se sai gia volare con tinyhawk 2 nella realtà, puoi anche non usare piu il simulatore, ma fare sempre piu pratica e gradualmente osare sempre di piu

@@swimbeyonder il suono lo registro perche sul tinyhawk freestyle che ho, ho cambiato la vtx perche la mia si era rotta. E ho preso una hglrc zeus nano che ha il microfono e quindi puoi sia sentirlo mentre voli con una cuffia, e sia sentirlo nel dvr registrato. Ma è una modifica che ti sconsiglio di fare su quel drone. Non è semplice per un neofita

💪💪💪💪❤️

Specs in description. For the pid tune i just used the uavtech preset tune for 3/4 inches drones

ok thanks@@SUPERBAFFOFpv

Disse colui che provò ad abbattermi! Ahahaha ❤️

@@SUPERBAFFOFpv

Grande Fede! Grazie 🤩

It is a very difficult question because the are tons of choises. It is very difficult to have just one drone for an entire year without breaking something. Maybe your best choise would be a 2s tinywoop like the mobula8. Or if you want more power (but you can break it of course) you can take the crux35 but it is a totally different drone. I would go for the mobula8 as a total beginner ✌️

@@SUPERBAFFOFpv I am thinking of getting a tiny hawk 2 freestyle since from what I see it gives more control in acro mode like a normal fpv drone would. I want to kind of freestyle more since it is way more fun. I think of just practicing in a simulator until I have it more mastered, Yet I am still worried to crash so I was wondering if there is any protective covering for the tiny hawk 2 freestyle, what I mean from protective covering is like tiny whoops usually have something covering the propellers during a crash

@@jaydenzrago nope. If you want prop guards you don't need the tinyhawk2 freestyle. Just take the mobula8. I would go for it

@@SUPERBAFFOFpv can you do the same things with the mobula8 as you could with the tiny hawk 2 freestyle?

@jaydenzrago almost yes! Of course it has propguards so it is just a little worse against the wind, but way more safe

Sorry man, i didn t see the comment. You need to tell me what kinf of receiver you have? Express elrs?

Hi. As I can see you need more info about the hobby man. The nazgul can be purchased with a lot of different receivers and everyone is different. Whar rx are you using? Elrs? Crossfire? Frsky? Flysky? Other?

@@SUPERBAFFOFpv i jave

@@SUPERBAFFOFpv i have beta fpv nano module and nano rx

@@SUPERBAFFOFpv it binds but dosent work can you pls help iam trying to make it work for 90+days now

@@SUPERBAFFOFpvthe uart is correct protocol is crsf

Hi and thank you for the comment. My drone is totally stock. But I purchased it 2 years ago now. I have never had any of the problems you told me. It is a very light and powerful drone and if you have some little vibrations when you have bad props and if there is some wind, it is normal to me. As it regards the durability, i must be honest, i did not have crashed a lot with this drone, but sometimes yes, and it is still there in it's original frame. (The whole frame costs less than 10 euros)

4k 30fps xview

Sorry man. I did't see the comment. I use tattoo r line 550mah 3s on this drone

thank u so much :)@@SUPERBAFFOFpv

Sorry man. I didn't see the comment. No, this is totally different from a 5 inch quad as it is way under 250grams. You don't have the same momentum but you are way more agile

Thank you man! 🙏🙏. Under the motors I just installed some of those soft oval rubbers attached under the frame. if you have an hard crash they come unglued hahaha. But the can save an arm. I don't use the original tpu which come from the crux, I just found on thingiverse a file for the crux35 and a gopro style mount. I have a friend of mine who has a 3d printer... Than for the thumb pro I use a tpu bought from aliexpress, phisitall shop, just choose the right hole depending on the hole you have for the mount chosen on thingiverse. It is not so easy to explain sorry

@@SUPERBAFFOFpv thnk you.

@@FfBrax feel free to ask anything you want. If I can help, I'm happy 😊

Hi! I'm glad for having inspired you 🙏. Crux35 is a very light and powerful drone so in my opinion it is pretty normal to have some vibrations with wind at high trhottle sometimes. I have never had bad experiences about it. New props can hel for sure. And i had the best experience with 650mah lipo and the thumb pro on it

@@SUPERBAFFOFpv great. Can I avoid oscillation if I use a heavy battery?

@ShaggYlk-dulajpasindu you are asking fo a scientific answer, but i only have the answer i just gave you: my best results are with 650mah lipo and the thumb pro on it. But maybe it's just my model, or maybe not.