Видео

Can you share the template?

Just ordered mine! What pedals & mud guard did you go for?

Nice work. And thank you for the shoutout. ❤

Hi RideRightwaxing & UKOneWheel, just uploaded video of the alternative to raptor. cheers Marty.

Worst job stripping paint but it looks like you're nearly there, Wurth makes a stone chip paint it's acrylic based so you can wash the gun out just with water, Rally guys are using it around me and rate it, no isocyanate like you get in rapter so you can spray in your garage, and It's cheaper, I have just bought some and will be doing a video soon. Glad you're getting some nice weather. we are lucky and blessed with dry warm weather we're we live, but it has been cold and wet lately. Keep up the good work. Cheers Marty

Hi ant, I just pm'd you on messenger buddy 🚗😃

Buy a mic.

Yeah could do it that way would save running another line, I went with two lines because that's what was on the car originally, the larger 3/8 is the return back to the tank, my regulator is variable as running a turbo, so starts around 3 1/2 psi on idle and increases with boost, there is an extra pipe running from plenum to regulator. Cheers Marty

Got to say I’m really not looking forward to doing this, but it’s inevitable. Mine is the same age as yours. It needs it. lol.

I don't know if you're doing it, but when I did mine I removed all the rubber bungs in the front and rear floor and welded them up.

I see you say you got carried away, you forgot to mention that some idiot with an orange mini suggested to fit an internal pedal linkage 🫣 having watched your adventures I’m really glad I didn’t now.

Well done mate. Looks like proper hard shitty work. I want “a few moments later” clip when you finally finish this beast. 😂👍👍

I think I would be tempted to paint the roof first with black fabric paint to get rid of those marks as you won't ever get an opportunity to do it again as it cant be painted onto silicon.The beading aspect is impressive but does it still allow the fabric to breathe? It was my impression that it isn't the fabric that is supposed to be waterproof but the rubber layer beneath??

260 mile range from a 90kWh battery is pretty poor. Is it possible to get more range with more efficient driving?

I looking for Buy one 2007 brown for only 400$🙏

Good work mate. 👍

Don't understand how there are so many views and such little feedback. This is a great, step by step video. It''s super informative on the techniques and explains the theory behind each step.

Hi my friend, looks like your having fun, here's a few answers to your questions, use a mpi fuel tank because it has a return fitment in it, you don't need to modify rear subframe, the fuel tank should bolt straight in after your boot floor mods, fuel lines are 3/8" and 5/16" this way you can use AN fittings, you can use p clips every 300mm for fixing lines, interior lines have to be continuous from rear bulkhead to front bulkhead, use bulkhead fittings, the larget fuel pipe is return line, you will need high pressure fuel pump for the injectors to operate, I have posted a couple of videos of me installing fuel lines on my son's classic rally mini build, which is going to run injection to. Hope this all helps, cheers Marty

brilliant video thanks for that i was really struggling on what to get love the oil too

🤢this camera angle is so baaad.

Garden looks amazing ignore negative comments most of it jealousy

Just curious thinking about doing this to my soft top how long before I have to apply it again

That’s a good hack!

Hi , I love your deck 😍, actually all your garden. Natural wood colour looks so nice! Can I ask you what measurement is your firepit cut off part, please? It looks so cosy there.

Sorry about your dad, prayers for your family. Thanks for the great video. Keep them up!

Hi. Is the decking oil like a rusty water?, I bought a tin a few years back and it was like a rusty water and had a strong chemical smell and it was great , then bought a similar tin as couldn’t find the same one and it was more like a brown paint consistency with no smell but wasn’t as good

I'm having this issue and my screws were pretty tight

They look fantastic as always . Many thanks.

❤❤❤

All deck oils and stains are just petroleum based plastic coatings. 'Deck oils' don't actually deposit any oil into the wood, it all evaporates soon after application. 'Weathering' is just the plastic coating visibly deteriorating. If you ever want to actually have oil fill up your deck's wood pores, a linseed oil stain is about the only product capable.

Sorry but this made me laugh out loud 🤣 what are the chances of actually landing in the puddle… you need a buoyancy aid if you do that again 😂

Love it 🤙

get a dropper post be perfect

Great decking, looks “ as new “ . I’ve probably left my decking too long ( caravan decking in Norfolk ) and it’s gone that “grey” colour you were trying to avoid. Seems like I’ll now have to go with some form of stain and not a clearer looking Oil. Any suggestions , do or don’ts ?? Many thanks

Just ordered the exact same bike today. Love the satin with gold. Can't wait for the call from the shop to pick it up. I'm glad to see that yours came with the mastermind tcu. Some 23's don't seem to have it even though Specialized says it comes on the 23 model.

second that, the strip discs are awesome they don't last that long is the only downside, Citristrip is meant to be good haven't tried it yet but have bought some in readiness for my next project, Citristrip is supposed to be harmless with a nice lemon smell, check it out on youtube. with the welding set your feed speed to the thickness of metal your welding and then adjust your voltage to find the sweet spot, welding tips and tricks is an awesome site that explains how to. cheers Marty

Hi, So Keith Miller on his channel...'Classic mini workshop' used the 4inch Poly Strip disc abrasive wheels. And he said he had got them off of Ebay. I've just searched it myself and there are obviously various suppliers. Think he just used the black ones and said they are very good at getting the paint off without damaging the metalwork underneath. Hope this helps... Cheers Andy 😊

Yes you can get wire wheels that will fit straight on your angle grinder from Toolstation that’s were I got all mine for doing my mini , hope that helps .

Is that a supped up one 😊

Hi, just found this video, awesome video and very intuitive, we are currently building a classic mini for club sport and just about to start putting in an internal gearshift ourselves so this has been a real help. We are uploading parts of the build onto my you tube channel. keep up the good work cheers Marty.

Thanks man this was my first season on the slopes I didn’t even know I had to any kind of maintenance to my snowboard 😅

Would you say this bike is easy to assemble. I’m in two minds to mail order for a bit cheaper or stick with the one I’ve put aside ☺️

I need this service

Thank you very much . Waiting for the sun to come out and it's going to be fabsil time in my bmw. Thanks again for the video🙏

Just discovered this video due to ordering an ipace recently. Sorry to hear about your dad mate. How powerful was that charger at the end? I’m not new to EVs so have some sort of idea but that charger must have been a slow one (or working slowly) for a near 4 hour charge time? You are using the CCS plug there so have thought it would be quicker?

Hi. Thanks for the video great help. I am using Fabsil for the first time. A question. Do you apply the Fabsil 1 ore 2 times after another??

Just ordered this exact bike. So stoked!!

Just ordered mine, can't wait to try them out😊

Rvl8 rule!!!

Amazing work. I'm just curious how much this would cost. Seems like a lot of work.