- Видео 210
- Просмотров 227 189
Bron Zeage
США
Добавлен 12 сен 2008
The Secret Underground Laboratory Recovery & Salvage repairs and restores furniture from the pre-particle board age and lighting from any time. The Lab is located in Baton Rouge, Louisiana.
If you have a treasured piece of furniture or lighting which has suffered the abuse or neglect of the years, the Secret Underground Laboratory can repair and restore it, so it can again serve its purpose in your home.
We offer reasonable prices and highest quality craftsmanship. Most work is completed in a week or less.
Secret Underground Laboratory Recovery & Salvage
4401C Government Street
Open Mondays, Thursdays, and Saturdays 10 -5
Other days, by chance or appointment!!!
If you have a treasured piece of furniture or lighting which has suffered the abuse or neglect of the years, the Secret Underground Laboratory can repair and restore it, so it can again serve its purpose in your home.
We offer reasonable prices and highest quality craftsmanship. Most work is completed in a week or less.
Secret Underground Laboratory Recovery & Salvage
4401C Government Street
Open Mondays, Thursdays, and Saturdays 10 -5
Other days, by chance or appointment!!!
Rewiring a Previous What Were They Thinking Repair Lamp in the Secret Underground Laboratory
A strange mix of ceramics and plaster.
Просмотров: 270
Видео
Who Made this Chapman Brass Lamp? in the Secret Undeground Laboratory Recovery and Salvage
Просмотров 27121 час назад
Having a name on a lamp is fairly rare and sometimes when there is a name, it's not much help.
Small Windsor Chair Repair in the Secret Underground Laboratory.
Просмотров 36814 дней назад
Drilling an angled mortise and repairing a broken stretcher for Windsor chair.
The Mystery of the Scandinavian Lamp in the Secret Underground Laboratory Recovery and Salvage
Просмотров 60621 день назад
A lamp with dimmer that doesn't dim still doesn't light.
Lab Magic Saves a Modoline Lamp in the Secret Underground Laboratory Recovery and Salvage.
Просмотров 399Месяц назад
Another shipping damage victim is on the Lamp Bench.
Are TV Lamps a Silly Idea or Just Fun? No Judgments in the Secret Underground Laboratory
Просмотров 232Месяц назад
Rewiring a Howard Kron television lamp.
Dovetails and Nail Guns Don't Mix Another Drawer Video in the Secret Underground Laboratory
Просмотров 452Месяц назад
Repairing a drawer requires removing wire brads and making new dovetails.
Drill Press Jigs to Drill Brass and Save Your Fingers in the Secret Underground Laboratory
Просмотров 255Месяц назад
How I make jigs to hold irregular shaped small brass parts for drilling.
Repairing a Hand Cut Dovetailed Drawer From a Furniture Mill in the Secret Underground Laboratory
Просмотров 363Месяц назад
Dovetails were the last furniture joint to made by a machine.
Making a Fire Extinguisher Lamp in the Secret Underground Laboratory Recovery and Salvage
Просмотров 1472 месяца назад
All the special tricks for making a lamp out of something that was never intended to be a lamp.
Chair Hospital and the Lost Tack Edge in the Secret Underground Laboratory Recover and Salvage
Просмотров 2072 месяца назад
There's only so many times a chair can be reupholstered before there's nothing for the tacks to grab hold of.
Putting a Floor Lamp Back Together Better in the Secret Underground Laboratory Recovery & Salvage
Просмотров 3392 месяца назад
It was rewired once before and that's where things went wrong.
The Hollywood Nightlight in Secret Underground Laboratory Recover and Salvage
Просмотров 4422 месяца назад
Rewiring a 4 light Hollywood Regency table lamp.
A Lantern With Nobody in the Secret Underground Laboratory Recovery and Salvage
Просмотров 8143 месяца назад
It does have a body, just a vey small one.
Making It Crystal Clear in the Secret Underground Laboratory
Просмотров 4183 месяца назад
Rewiring a very nice crystal lamp and the problems of a stack of expensie glass.
A Basket Case Chandelier in the Secret Underground Laboratory Recovery and Salvage.
Просмотров 3553 месяца назад
A Basket Case Chandelier in the Secret Underground Laboratory Recovery and Salvage.
The Drawer From the Dresser That Never Was in the Secret Underground Laboratory Recovery and Salvage
Просмотров 5293 месяца назад
The Drawer From the Dresser That Never Was in the Secret Underground Laboratory Recovery and Salvage
Chair Hospital and Mother of all Jigs in the secret Underground Laboratory Recovery and Salvage
Просмотров 4173 месяца назад
Chair Hospital and Mother of all Jigs in the secret Underground Laboratory Recovery and Salvage
A King Size Footboard Goes Off the Rails in the Secret Underground Laboratory Recovery and Salvage
Просмотров 1214 месяца назад
A King Size Footboard Goes Off the Rails in the Secret Underground Laboratory Recovery and Salvage
A Shop Made Lamp Pipe Tool in the Secret Underground Laboratory Recovery and Salvage
Просмотров 3554 месяца назад
A Shop Made Lamp Pipe Tool in the Secret Underground Laboratory Recovery and Salvage
More Modern Lamp Problems in the Secret Underground Laboratory Recovery and Salvage.
Просмотров 3744 месяца назад
More Modern Lamp Problems in the Secret Underground Laboratory Recovery and Salvage.
Modern Lamps Have Modern Problems in the Secret Underground Laboratory
Просмотров 5715 месяцев назад
Modern Lamps Have Modern Problems in the Secret Underground Laboratory
Chair Hospital, Extracting a Broken Screw in the Secret Underground Laboratory Recovery and Salvage
Просмотров 5405 месяцев назад
Chair Hospital, Extracting a Broken Screw in the Secret Underground Laboratory Recovery and Salvage
Lighting a Candlestick in the Secret Underground Laboratory Recovery and Salvage
Просмотров 1345 месяцев назад
Lighting a Candlestick in the Secret Underground Laboratory Recovery and Salvage
Chair Hospital, the Italian Chair Affair In the Secret Underground Laboratory Recovery and Salvage
Просмотров 3025 месяцев назад
Chair Hospital, the Italian Chair Affair In the Secret Underground Laboratory Recovery and Salvage
The Only Lamp Rewire Video You'll Ever Need from the Secret Underground Laboratory Recovery&Salvage
Просмотров 1,4 тыс.6 месяцев назад
The Only Lamp Rewire Video You'll Ever Need from the Secret Underground Laboratory Recovery&Salvage
Putting a Duncan Phyfe Pedestal Back on Its Feet in the Secret Underground Laboratory
Просмотров 3016 месяцев назад
Putting a Duncan Phyfe Pedestal Back on Its Feet in the Secret Underground Laboratory
Putting it all together in the Secret Underground Laboratory Recovery and Salvage
Просмотров 3076 месяцев назад
Putting it all together in the Secret Underground Laboratory Recovery and Salvage
Rewiring a Rewired Floor Lamp in the Secret Underground Laboratory Recovery and Salvage
Просмотров 5056 месяцев назад
Rewiring a Rewired Floor Lamp in the Secret Underground Laboratory Recovery and Salvage
Rewiring Brass Dancer Floor Lamps in the Secret Underground Laboratory Recovery and Salvage
Просмотров 3586 месяцев назад
Rewiring Brass Dancer Floor Lamps in the Secret Underground Laboratory Recovery and Salvage
The clothspin tip is a definite keeper. Putting a couple in my tool tray tomorrow. Thanks
@@kathybelk1333 You are very welcome. I have a drawer full of clothes pins within arms reach of the light bench.
DPR - Dreaded Prior Repair I have several eggbeater drills that I use regularly. I call them my cordless, reversible, adjustable torque, instant stop, and never need recharging drills.
@@byhammerandhand l find the eggbeater drill to be very handy, especially for shallow holes such as when setting hinges. Easy to center and won't go too deep.
More great information and another useful fixture idea. Thanks
@@chuckfisher2106 Thank you very much.
nice repair on a previously resurrected lamp
@@johnmolnar2957 Thank you very much.
Nice video. Reminds us of the proper application of power tools and when hand operated is better.
@@Rusty_ok Thank you. Working with damaged ceramics and glass is the most stressful kind of work.
You missed a perfect opportunity to describe your clothespin as a nonmarring lamp pipe clamp. Fun fact: clothespin in Finnish is pyykkipoika, which literally translates to "laundry boy".
@@onzie9 Now that is interesting. Every language uses metaphors that can't be literally translated. The reason English speakers "turn" on a lamp comes from early oil lamps that had a wick that was adjusted by turning a stem. I had a Malaysian friend ask me to "open" a light. This probably goes back to when one opened a window shutter to let in light.
Where do you buy your clamps? Would Home Depot have them? Where can I buy the wrap around for the furniture piece? Where it wouldn’t mark up the furniture?😊
The clamps are sold at Home Depot and Lowe's, as well as many other places. The wooden fixtures and jigs that hold the legs are made in the Lab. Repairing curved furniture parts usually requires some kind of custom made jig for clamping.
Very nicely done. I never knew the difference with the wire connection. Appreciate you sharing your knowledge.
Thank you very much. I give the same basic sermon on wiring a socket in every video because it's a safety issue. I don't know how common it was to be shocked by touching a light socket shell, but that's why the ridge wire has to go under the silver screw. This became standard in the 1970s. I rewire a lot of fixtures originally made for European and Asian Markets and they have very different solutions to the problem. European sockets are all plastic and the metal hardware is deep inside the shell. I've seen other sockets that have a spring plunger inside the socket that forces the switch to the off position when the bulb is removed. The US design dealt with the problem in a way that didn't require a drastic reengineering of our hardware.
Good job
@@kathybelk1333 Thank you very much.
Thanks for another interesting history lesson on lamps.
@@chuckfisher2106 Thank you as well.
Same, Thanks, Where do you get the threaded socket. I only see the slip on at the local box stores.
@@wademackey1098 You can find them at Grand brass.com. I buy most of my inventory from them.
I am just leaving a comment so it helps you algorithm
@@Rusty_ok I appreciate it very much.
Very nicely done! You definitely caught my attention at 1:37. For a quick moment I thought it may have been a piece from my grandfather’s shop.
Thank you. It's rare to find the name of the maker and the buyer on a piece. It's much more common to find the label of the furniture store. This one was a real nightmare because breaking the glass makes it a total loss.
Thank you again.
Bron - Thank you! Two takeaways - the dowel tenon and the drill press jig. Question: what are you using on the lathe for the tenon - spur bit or a clamp style to hold the dowel as you turn?
@@agjohnsonandsonYou are very welcome. I use a 3 jaw chuck and a dead center.
Interesting and instructional. Thank You
@@chuckfisher2106 Thank you as well.
You are still teaching some old dogs new tricks, sir. I agree with you about using bamboo. It's a flexible material which splits readily creating a stronger bundle of fibers. I confess in advance to stealing the stepped replacement round tenon. Sizing it to fit the hole is also a more sensible approach. I must also ask finally whether this mini chair is part of a set (or playset) which was a reason that the owner felt it worthwhile to have it repaired when Ikea similarly sized chairs can be bought often for less than the local price of materials
@@annarboriter Thank you very much. This chair is part of a set. I believe it is British or German. I turned the repair piece before I drilled the hole. It's strange how a half inch sounds like an exact measurement but sometimes isn't.
I have a small basement shop similar to yours. I learned alot watching you repair this chair, especially the old "rope trick". Great job! Keep 'em coming! Retired carpenter age 74. near Detroit. Like to hear some discourse on Plato's Republic next time.,..
@@mjac8373 Thank you very much. Chairs never have convenient clamping points, which makes rope an ideal solution.
👏👏👏👏👏💯💯💯💯💯💯💯👏👏👏👏👏💯💯💯💯💯💯
wow, excellent techniques and excellent tips, thank you very much, I really appreciate that you share your experience. Blessings!
@@proyevividig Thank you as well.
That needed a complete reduild, well done.
@@RightHandShot Thank you very much.
Your videos are always worth watching. Thank you, Bron.
@@crazyorangefish01 Thank you as well.
Hi Bron! I absolutely love TV lamps😍 We don't have many at all here Down Under; I imported one from your neck of the woods for a friend's birthday gift - it was a majestic stag styled in the art deco fashion...just beautiful. It also needs to be rewired as it still has the US plug, but I'm not game to do that myself LOL. THanks for another great tutorial!
@@patientorlando1306 Thank you as well. It's best to replace all the hardware from the plug to the socket. As we saw in this video, vintage lamps are great, but vintage wiring can be a problem.
what gauge of wire did u use for the arms and for the main one going to the ceiling?
@@claytonb3377 I use 20gauge lamp cord for the arms and 18(SPT1 or SPT2) for the trunk wire. When Im rewiring a chandelier for a dealer, I use a cord set, which makes it easier to display.
Nicely done sir 🤙
@@boneheadscorner8286 Thank you very much.
Hi Bron I love your videos they are so informative! I recently purchased an art deco bronze kneeling lady holding a glass sphere, the globe needs changing but I tried to remove the sphere but I didn’t want to break it. I would like your advice how to remove it safely..thank you.
Thank you very much. If the globe does not have screws in the fitter(collar), it will be held by spring clips on the inside, or threads sort of like a jar lid. Either requires real courage because you have to hold the globe very tight. The clip type must be pulled straight up. The thread type is turned counter clockwise. The problem is holding the lamp while you pull or twist the globe. For this situation, I usually make a jig to hold the lamp to the bench. Of course this requires knowing the strength of the lamp and proper padding to protect the finish. Before it gets to that point, put it on a stout table or desk. Have a strong friend hold the lamp firmly. Wear non slip work gloves and try to turn the globe. If you can turn it a half turn without it coming off, it's a spring type. This has to be pulled straight up. If you can send pics to the Secret Underground Laboratory Recovery and Salvage Facebook page, I may be able to tell you more.
@@BronZeage Thank you so much for your advice..I think I will send you a photo before I attempt to remove the globe 😅
What is the name of the type of socket mentioned at 8:14. Can you post a link on where to acquire them? Thanks.
The socket in the video with the screw ring, doesn't have a specific name, other than Edison-26, which is the general term for all regular size sockets. You can find them at Grand brass.com. I buy most of my inventory from them.
Interesting as usual. Thank you.
@@chuckfisher2106 Thank you as well
Always learn something from your videos
ב''ה, since I'm dropping knowledge here, solder is great but when reckoning with wall current, the iron that melts the solder is carrying similar current, thus I'm pretty sure code favors the fully mechanical connections (wire nuts, crimps, the new lever things that may nonetheless have taken out a bridge recently) where even if a connection fails and somehow heats the wires will not come apart and risk making the situation worse. Practically speaking, a good twist does that anyway but something to keep in mind for any viewers considering burying DIY repairs in their walls or cabinetry.
@@josephkanowitz6875 in 50 years I have never seen a proper solder joint fail, but seen many wire nut connections fail due to corrosion induced resistance.
ב''ה, might be covered as I'm only halfway through, but for trip and yank resistance, the "underwriters' knot" is what you want for standard lamp repair. In a fixture like this a plastic strain relief is also common and standard these days. There's also some kind of crimp bushings available for stranded wires for screw terminals but check what code allows, I guess.
@@josephkanowitz6875 This particular fixture did not allow for an underwriters knot or cord protectors. Please see my other videos for an exhausting explanation of underwriters knots and cord protectors.
ב''ה, might be covered as I'm only halfway through, but for trip and yank resistance, the "underwriters' knot" is what you want for standard lamp repair. In a fixture like this a plastic strain relief is also common and standard these days. There's also some kind of crimp bushings available for stranded wires for screw terminals but check what code allows, I guess.
The twisting the end of stranded wire is a great tip
Thank you. It makes a real difference when using solder connections.
I have done repair work on, among other things, power recliner chairs. There is the 120 cord, the transformer, the low voltage cord, the switch and the motor, and wires between. Initially, I had salvaged parts and would swap them in and out until I found what was not working. Then I got a non-contact voltage detector and it became my friend. First time I used it, I diagnosed a problem in the 120v cord and it would switch off and on when I wiggled it. Saved a lot of time.
I use the non contact volt detector when doing installations because you never know if the breaker is really off.
@@BronZeage ב''ה, can't watch RUclips at decent resolution but looks like you have a multimeter including ammeter where a clamp probe will provide this feature. Never had the opportunity but I gather it's one of those electronic engineering miracles that those just work across standard meters.
@@josephkanowitz6875 @josephkanowitz6875 A good DVOM is an indispensable tool for electronic work. It does have an amp meter probe and can serve as an inline ammeter up to 10 amps.
If your going to give history lessons on a lamp mfg company make sure it's factual information please.
This is a lamp repair channe, not a history channel. Please feel free to make a video giving what you believe to be the correct information. I will be happy to watch and comment.
I'm so grateful that you integrate your philosophy of repairing into your practical tips and work.
@@annarboriter Thank you very much.
Thanks for several interesting tricks. Useful info as always.
@@chuckfisher2106 Thank you as well.
I have just added straw to my lamp repair toolbox. Thanks for the tip
@@kevinfrench5915 You are very welcome.
Thank for the visual. I rewired my lamp. It wasn’t, easy but I did it!
You are very welcome.
You are very welcome
Problem solver extraordinaire
@@byhammerandhand thank you very much
We use the tool you used to deburr the end of the pipe in reloading ammunition. It is used to chamfer and deburr the inside and outside of a wide range of calibers of brass cartridges before inserting new powder and a projectile. There is probably a formal name for this tool but reloaders will call it a deburr bullet. These are currently available for about $30 at midway USA or Brownells.
@@Rusty_ok I figured it was something like that, since it seems to be the only thing it does.
👏👏👏👏👏💯💯💯💯💯💯💯💯🙏🙏🙏🙏🙏🙏🙏🙏
@@proyevividig Thank you very much.
Thank you so much; excellent work and excellent tips; blessings!
@@proyevividig Thank you again.
So jealous of your shop.
Glad you could make it safe and functional. Maybe a little harder to pull but working as intended. Great job. Cool old lamp.
@@kathybelk1333Thank you very much. I think the pull effort is the same, but the slight change in the chain angle means the return effort is greater. I had to lift the ball slightly for the switch mechanism to click back into place.
I should have known you would fix that also
Such great priceless tips~ you’re wonderful! 😊
@@soleilnoir1955 Thank you very much.
A job well done. Thank you sir.
@@heatherbottoms5813 thank you as well.
As usual, good and useful info. Thanks.
@@chuckfisher2106 thank you as well.
This was well explained, thank you for detailed video. Off to rewire and old lamp from the trash!
@@rosecat5638 You are very welcome and thank you as well.
I always learn so much from your videos. Thank you for sharing your knowledge.
Thank you as well.