![Split141](/img/default-banner.jpg)
- Видео 72
- Просмотров 129 064
Split141
США
Добавлен 3 фев 2013
I've been on RUclips since its birth and the internet even longer. Mostly as a lurker. I've watched thousands upon thousands of hours of user generated content. I've always felt that I've needed to get in on the large community of RUclipsrs. Hopefully some of my content can give back and maybe help some people along the way.
What you will see here:
Things I find interesting that I believe are worth showing. That can really mean anything. You probably won't find one flavor of content here. I'd like to be able to freely post what I think is cool. Hopefully some of it won't be to boring.
Check out my instagram @split141 for more daily updates
Thanks
What you will see here:
Things I find interesting that I believe are worth showing. That can really mean anything. You probably won't find one flavor of content here. I'd like to be able to freely post what I think is cool. Hopefully some of it won't be to boring.
Check out my instagram @split141 for more daily updates
Thanks
Turning Pivots on the Lathe
The struggles of turning Midnight pivots on a 2004 kia 15lms.
Turning is great when it works, but it takes quite a while to set it up and get consistent results.
Thanks for watching!
00:00 - What is consistency?
01:59 - Intro
04:32 - Struggles with turning when you're slow
18:26 - At this point my feet hurt
20:45 - Setting up centerline on backside tool
26:58 - Managing to hit centerline..
27:56 - Full turning program for a pivot
36:02 - Backside | G55
37:03 - Finished pivot
37:45 - Scrapping the pivot in real time
39:09 - Outro
Turning is great when it works, but it takes quite a while to set it up and get consistent results.
Thanks for watching!
00:00 - What is consistency?
01:59 - Intro
04:32 - Struggles with turning when you're slow
18:26 - At this point my feet hurt
20:45 - Setting up centerline on backside tool
26:58 - Managing to hit centerline..
27:56 - Full turning program for a pivot
36:02 - Backside | G55
37:03 - Finished pivot
37:45 - Scrapping the pivot in real time
39:09 - Outro
Просмотров: 813
Видео
Messing with phase converter line caps
Просмотров 37210 месяцев назад
Trying to figure out some stuff with the phase perfect 355 and its line caps. www.practicalmachinist.com/forum/threads/late-2019-phase-perfect-pt355d-line-caps-failing-after-6-months.417974/#post-4131039 00:00 - Hey 03:10 - Removing the caps 08:26 - Talking about caps 11:21 - Testing the caps with meter 13:15 - Caps reinstalled 14:11 - Outro / whining
My new tumbler - Mrdeburr DB300
Просмотров 9932 года назад
0:00 - Concrete get out the way 1:36 - Some overview type dialog 5:05 - Motor, belt and drive train 7:37 - External basin stuff 8:22 - Basin 9:38 - Motor belt tension 11:30 - Tank divider install 13:20 - Sound cover 17:09 - Liquid pump and related 21:23 - Media I'm running 23:20 - Tumbling fluid (compound) 23:40 - First start up 24:50 - I'm out In this video I install my brand new tumbler, a Mr...
Fixing Holes In My Harbor Freight Tumbler
Просмотров 7772 года назад
In this video I fix some holes in my Harbor Freight tumbler. I have 3 of these and with them running basically 24/7 tumbling knife parts, along with running some really aggressive media they require constant upkeep. In this video I take some polyethylene(PE) strips and fuse it back together. I have a large tumbler upgrade coming in shortly. There's almost no videos on the tumbler I went with, s...
Hardmilling Midnight Blades
Просмотров 1,6 тыс.2 года назад
Continuing where we left off from - ruclips.net/video/YUyKXiveN9Q/видео.html In this video we work on the "show side" of the knife bevel. 0:00 - Intro 01:59 - Cam 09:36 - Setting up blade on tombstone 12:00 - Milling thumbslot 14:15 - Roughing bevel 15:34 - Semi finishing bevel 16:30 - Inspecting after semi finish 19:30 - Final finish 20:40 - Inspecting after final finish 22:32 - Turtle 22:40 -...
Hard milling knife blades - First side
Просмотров 2 тыс.2 года назад
In this first hard milling video we go over CAM and machining the first bevel for my latest knife. Apologies about the CAM related audio. Legit thought the desktop mic was plugged in. It's fixed in the next video. CAM - 0:00 Loading blade onto machine - 23:57 Start machining - 26:44 Checking run out on finishing tool - 29:23 Milling blade lockup angle - 35:45 Roughing out bevel - 36:21 Semi fin...
Surface grinding Midnight blades
Просмотров 5632 года назад
After heat treating we surface grind the blades in preparation for hardmilling. Intro - 0:00 Going over the surface grinder - 1:54 Surface grinding - 7:03 Lapping - 12:05 Outro - 13:04 I found after this video that wetting the back of the sandpaper and having it stick flat got me a lot more consistent results. I do think getting some real lapping plates would probably make this work flow a litt...
New knife blades
Просмотров 8692 года назад
Intro - 0:00 Cam - 5:40 Machining - 11:50 About the furnace - 13:27 Back to machining - 17:14 After roughing - 21:34 Making heat treating foil packets - 22:27 Quenching blades - 28:03 Outro - 32:09 Okay so full circle back to knives. New design, new pains :) In this video I show you the first couple steps I am taking to go from raw material to finished knife blade. We go over some annealed mach...
Finishing up the Titanium Keycap
Просмотров 8832 года назад
0:00 - Intro 3:19 - Fusion Cam for op2 8:36 - Machining 13:06 - 3d printed box inserts 14:03 - Done part on machine 14:50 - Outro / done part Continuing from the other keycap video :) We handle op2 for the keycap, which is where all the magic happens. Good first run on the keycap. Made a couple small tweaks, but they are pretty spot on now. Check out triiaxis.com for this key and some others :)...
CNC Machining Titanium Key Caps
Просмотров 1,6 тыс.2 года назад
0:00 Intro 1:06 Op1 setup 3:33 Going over CAM 10:11 Start machining 11:44 Checking the keycap after roughing 14:34 Checking the keycap after internal roughing 16:56 More internal roughing checks 18:00 Cutting the keycap cross 20:40 Checking the keycap after being finished 25:05 Exit stage left RUclips decided to take 18 hours to upload this, and nuked the videos quality in the process :) There'...
Processing and anodizing mini tweezers
Просмотров 6273 года назад
In this video I briefly go over some of the things that it takes to create the tweezers. Want to buy some? Check out triiaxis.com/product/mini-tweezers/ Want to support the kickstarter for the tweezers? Check out www.kickstarter.com/projects/triiaxis/keyring-mini-tweezers Want to follow my day to day bs? Go to instagram and follow @split141 Thanks for watching :)
EDC mini tweezers - Challenges with design and bringing to market
Просмотров 5233 года назад
Talking a bit about the challenges I've been facing and currently facing bringing my mini tweezers to market. Without the ongoing support of friends and family, products would not get off the ground. I only bring it up in the video because I am talking about having the product survive the regular flows of market after the initial rush of sales. :) 0:00 Talking about things 10:36 The lathe sub s...
Titanium tweezers - Machining the caps
Просмотров 4743 года назад
While waiting for my heat treat oven I decided I'd make something. Intro 0:00 First CAM portion 3:28 Parting blade clearances 8:24 Deleting parting blade material 10:25 Tapping live tool holder for coolant nozzles 10:56 Second working CAM portion 11:32 Loading the program on the lathe 16:35 Machining the CAP 17:10 Does the hole work for the tweezers? 18:46 First time radial milling 21:03 Final ...
Can you hard-face steel chuck jaws with drill bits as filler rod - Does it work?
Просмотров 5233 года назад
The third and last video for the square spacer debacle. It actually works incredible well. No deformation since, which is incredible. Good backup skill to be aware about. Thanks to the people who suggested it. 0:00 - The grand plan 2:41 - The weld 5:30 - After weld 5:42 - Testing the hardness 6:33 - Re machine the jaws 6:45 - After machining 7:20 - Making a square to align the jaws on the lathe...
Modifying chuck jaws for square spacers - Wasting Argon
Просмотров 2443 года назад
Modifying chuck jaws for square spacers - Wasting Argon
Square knife spacers on a cnc lathe - Square pegs, round holes.
Просмотров 1,1 тыс.3 года назад
Square knife spacers on a cnc lathe - Square pegs, round holes.
Kia 15LMS final overview - Should you buy used CNC equipment?
Просмотров 1,8 тыс.3 года назад
Kia 15LMS final overview - Should you buy used CNC equipment?
Kia 15LMS coolant system finished - Part 2 of turret repair
Просмотров 1,2 тыс.3 года назад
Kia 15LMS coolant system finished - Part 2 of turret repair
Fixing the lathes turret coolant system - Part one
Просмотров 2,6 тыс.3 года назад
Fixing the lathes turret coolant system - Part one
Kia 15LMS part 3 - Final part for small fixes - How to MDI
Просмотров 4073 года назад
Kia 15LMS part 3 - Final part for small fixes - How to MDI
Dual spindle Kia LMS15 - Maintenance and cleaning of the front panels
Просмотров 5083 года назад
Dual spindle Kia LMS15 - Maintenance and cleaning of the front panels
New to me dual spindle lathe - Kia 15LMS - Part 1 - Cleaning / maintenance
Просмотров 8413 года назад
New to me dual spindle lathe - Kia 15LMS - Part 1 - Cleaning / maintenance
How to turn your mill into a lathe - Setup / CAM / Using
Просмотров 1,6 тыс.3 года назад
How to turn your mill into a lathe - Setup / CAM / Using
Turning the mill into a lathe - Side tool block
Просмотров 7863 года назад
Turning the mill into a lathe - Side tool block
Turning the mill into a lathe - Part 1 - Making the tool holder block
Просмотров 8623 года назад
Turning the mill into a lathe - Part 1 - Making the tool holder block
Harbor freight sand blaster - Upgrades, thoughts and blasting
Просмотров 1,2 тыс.3 года назад
Harbor freight sand blaster - Upgrades, thoughts and blasting
CNC milling hardened knife blades - How to - Fixturing, CAD, and CAM
Просмотров 6 тыс.3 года назад
CNC milling hardened knife blades - How to - Fixturing, CAD, and CAM
Grinding on the new surface grinder - Tormach PSG 612 PT2
Просмотров 1 тыс.3 года назад
Grinding on the new surface grinder - Tormach PSG 612 PT2
The thing I really needed - A surface grinder
Просмотров 6463 года назад
The thing I really needed - A surface grinder
Garage vlog 8 - How the lockbar fixture works
Просмотров 4573 года назад
Garage vlog 8 - How the lockbar fixture works
I need to get 3 phase to my home shop. Been researching phase converters and found the same one you are running. I am leaning that direction over a rotary, same price and I get a voltage doubling unit built into the Phase Perfect. Nice set up man
Yeah.... I was scorned by some knowledgable folks not to use too many splines. They create beautiful geometry, but its a hellish thing to do. Just balloons up your G-Code.
What an awesome video. I might have to try this with the cnc at my school if they have some of these small cutters 😅
after milling and heat treat, send to nifty bar for double disc
Hello buddy , am trying to get fiberlaser Cnc machine also in my garage . How many amps is your Cnc has? Also is the phase converter working properly with the Cnc. I have 100 amps service as well
You can just use spade connectors to plug the wires into the caps
No, you can't, I spoke directly to the factory service tech. When Phase Perfect first started it's production they used spade connectors, vibration and variable current loading causes a resistance change and voltage change on the poor quality loosely connected terminals and trips an error on the unit. They modify the connection to screw on terminals to avoid this problem.
How did you post the program for lathe or mill
If you read this, could you provide the make, model, year, and Serial # of your machine? That would help anyone that might have a similar machine. Thanks!
Works like a charm. Awesome for digging out huge pockets where chips normally wont evaquate with cooling alone.
Hey man, did you ever figure out your power situation? We are looking to get a VF-2 for our 2 car garage in San Diego. Any help would be appreciated. Thanks for the video.
For small tools try PH Horn my opinion best small tools on the market.
Buen video, espero subas más contenido, amo el sonido de los motores disel, me traen muchos recuerdos de mi infancia!!!!! En este momento lo estoy disfrutando en compañía de mis hijos Ernesto Alexander de añitos mejor conocido como EL CUCHO y de mi Hijo Cesar Santiago de 8 añitos Alias EL TILIN!!! Ellos son mis amores, espero algún día poder disfrutar un paseo en un carro similar al tuyo en compañía de ellos!!!
Thank you for the kind comment :)
Good video buddy 👍
Oh, this is the guy on CC- recognize his voice. Why did you choose this lathe? Can you list the criteria you chose for the purchase?
Hi Split, I have really enjoyed your video and have watched it a bunch of times. It sounds like you are successfully running that VF-2SS with the 20 HP rated Phase Perfect and 60A breaker? That is pretty awesome. I was thinking that you would need a Phase Perfect 30HP rated phase converter and something like a 175A breaker? I find that kind of daunting! After all these years, is everything still running well? As far as having low voltage, I've had two shops (that also lacked 3-phase power, where one leg of 240v would be low - like in the high 90V range. It was discovered by an electrician when I was installing some new equipment. The utility made fast work of fixing it - but we lost a lot of motors and computer power supplies along the way. In the other shop, one leg would just go away, and I would have brown outs, or half the 120V things in my shop would just go out. Thank you for making these videos!
I think your breaker and wiring is too small. I think the recommended breaker size is 150 amps. For that phase converter.
I want to view whole video but can't. You repeatedly interrupt your sentence structure during mid speak. Can't follow you speaking. I hope you improve over time.
Need this on my VF2 thanks!!
Right on lol 😂
The bottom of my bowl has become thin and that is where the leak is coming from. Any idea on how to melt this material to the entire bottom of the bowl? Maybe a torch? Oh, and where else can you buy this type of plastic?
Unfortunately if the entire bottom has worn out I’d recommend swapping bowls, or might be time to upgrade to a larger metal style tumbler. There isn’t much in the $300-1000 price range that is really worth it. Mr deburr is a nice option but it’s a big ask for any small operation. If you’re set on trying to repair it the bowl is made out of polyethylene. Look up a local plastic supplier in your area and go to their facility or give them a call. They often have cheaper drops or scraps for sale from bigger sheets. Buy a piece of polyethylene big enough to cover the area you need. A torch should be able to soften it enough to bend it to shape. You’ll want a soldering iron to melt the pieces together though. You can also get plastic “welding” rod that would help with the repair. Finally if you find you’re wearing bowls out really fast switch to a less aggressive media, use more liquid, or separate the shaft counterweights so they run more balanced. That means less aggressive tumbling but the bowl will last longer.
I've been contemplating purchasing an older lathe w/ sub and live tooling so this was super helpful. A bit of a reality check on what's involved. Would love to get a deeper dive into those topics. Thanks for sharing.
Is it worth it
Love it all what you post so please do what you love to do and share . Have a great day
Loved the video! So nice to listen, much bettern then the Carbite Contend pod some episodes, where some guy is talking over you with "mhm.. yup aha.... yup... yup..."
Lets goooooo!
I like the format. Perfect for listening in the background and paying more attention when a specific topic is relevant for my work. Thanks for posting
Ohh just a video that I was after. Thanks a lot!!
Does phase perfect have more reliable units?
Some of my research leads me to believe the older blue ones are very reliable. All and all, I hesitate to say mine is unreliable in general because the conditions it’s operating in might be sub optimal. When it works it works well and without fuss, I’m just slightly annoyed with the overall situation.
@@split141xI have a 20 Horsepower blue box. 2008 year model, I just changed the capacitors for the first time ever last week. But it has seen very little use over the years. I bought from PP directly and they were $30.00 each. Using the screw on terminals is important, spades won't work, see my other reply above.
Man such good series. I’m just a shmuck that will maybe one day own your knife. LOL just realized this video is 2 years old. Keep up the great work man! I’ll be watching ALL your videos on the subject! Hope to see more newer videos in the future but I know you are busy making knives!
The low voltage issue won't be caused by the power supply from the grid. It will be from using the wrong vfd. A 15hp 3ph 240v vfd is fine for a 15hp 3ph 240v motor if you have a 3ph power supply. You'd want a 25hp 3ph 240v vfd if you are running it on a domestic 240v 1ph circuit. But, if you are only cutting aluminum then perhaps that big motor is a waste of power. You might work quicker with a high speed less powerful spindle.
Don't get me wrong here but to not be able to get those bore correct on the first part. Either your programming is incorrect with the offset or not popper set up. After programming go into wear comp -.005 cut measure adjust wear comp and done
Thank you for all the info!!
i like your fixture for the second side with the support sweep, i might steal that idea :) very good
are you not missing a dowel pin in the fixture to aline it?, i know your clamp has 2 screw and that also helps, but it could get on skewed with only two pins in the beginning ? i might not be a problem, i just saw it and wonderet
I just bought Midnight #80. The knife is exceptional. Funny enough I didn’t know you had a channel until after I bought the knife.
How can someone get intouch with you good sir?
This is way late, but when I talk to pp customer service, they said I would need 125amp breaker. Can you explain that if possible?
Great video
How do you have it automatically show different components when switching between setups? Haven't seen how to do that before in Fusion.
camera action making me sick
lol bro ive watched all your vids, love them. but dang you have alot of focusing cam issues, its like your cam is never in focus and it twitches alot. sorry to sound like im nagging, but i have watched alot of your vids, same thing.
Hey kiddo How bout an update? Been awhile
Hi Split141, could you tell me how tall the VF2-SS is please? I have a new machine on order and am hoping it will fit in my garage. Haas' layout diagrams do not give an exact figure for the 30 side mount tool changer. TY.
You should not run these kinds of machines in a residential area... That is why there are industrial areas ;-) they have a fatter pipe..
nice fixture, thank you.
If you ever upgrade and wanted to sell this, let me know 😉
I was typing and thought the click might feel more solid with titanium keycaps. I'm glad this video exists! It looks like great quality knowing the details in design and machining. I wonder how the weight compares to standard mechanical keycaps
What toolholder chuck size is it?
Can you please make a HUMAN AFTER ALL titanium keycap that failed to drop in the mass drop?
Snagged one !