![UNIMIG Support](/img/default-banner.jpg)
- Видео 52
- Просмотров 553 245
UNIMIG Support
Добавлен 3 май 2020
RAZOR TIG 200 AC/DC Full Setup Guide
In this video, we run through a complete setup and walkthrough of the RAZOR TIG 200 AC/DC Welder interface.
RAZOR TIG 200 AC/DC - unimig.com.au/product/razor-tig-200-acdc-tig-welder-u12002k/
Website - unimig.com.au/
Facebook - unimigwelders
Instagram - unimig
TikTok - www.tiktok.com/@unimig?is_from_webapp=1&sender_device=pc
⏰ Timecodes ⏰
0:00 - Intro
0:04 - Setting up the Machine
1:27 - Navigating the screen
2:10 - Weld Modes
2:54 - TIG Start
3:16 - Torch Mode
4:27 - AC Wave
5:12 - Pulse
5:23 - MMA Settings
5:55 - Weld Cycle
7:58 - AC TIG Weld Cycle
9:15 - MIX TIG Weld Cycle
RAZOR TIG 200 AC/DC - unimig.com.au/product/razor-tig-200-acdc-tig-welder-u12002k/
Website - unimig.com.au/
Facebook - unimigwelders
Instagram - unimig
TikTok - www.tiktok.com/@unimig?is_from_webapp=1&sender_device=pc
⏰ Timecodes ⏰
0:00 - Intro
0:04 - Setting up the Machine
1:27 - Navigating the screen
2:10 - Weld Modes
2:54 - TIG Start
3:16 - Torch Mode
4:27 - AC Wave
5:12 - Pulse
5:23 - MMA Settings
5:55 - Weld Cycle
7:58 - AC TIG Weld Cycle
9:15 - MIX TIG Weld Cycle
Просмотров: 2 289
Видео
How To Update The RAZOR 200 PULSE
Просмотров 6559 месяцев назад
Get step-by-step instructions to connect your RAZOR 200 PULSE to Wi-Fi and keep your machine up-to-date by installing the latest software updates. If you encounter any issues during this process, please reach out to UNIMIG. Email: support@unimig.com.au
RAZOR MULTI 230 AC/DC: USB & Micro SD Card Update
Просмотров 1,2 тыс.9 месяцев назад
Get step-by-step instructions on how to run the USB and micro SD card for the RAZOR MULTI 230 AC/DC welder to keep your machine up-to-date with the latest software. If you encounter any issues during this process, please reach out to UNIMIG service. Email: support@unimig.com.au
RAZOR MULTI 230 AC/DC Full Setup Guide
Просмотров 14 тыс.Год назад
In this video we run through a complete setup and walkthrough of the interface of the RAZOR MULTI 230 AC/DC MIG/TIG/STICK Welder. unimig.com.au/product/razor-multi-230-ac-dc-mig-tig-stick-welder/ Our brand new RAZOR MULTI 230 AC/DC 4-in-1 is here. As the latest and greatest addition to our RAZOR line, this machine can do any kind of welding you need it to. MIG, High-Frequency AC & DC TIG, Pulse...
How to Change the Torch Liner in Your MIG Welder
Просмотров 8 тыс.2 года назад
The liner in your MIG torch is just one component that makes up a smooth wire feeding experience. If there are any issues with it, you’re going to have problems when you weld. That’s why changing your liner as needed is essential. Letting your wire drag because your liner has kinked inside the torch is going to give you an erratic feed, which you don’t want. Changing your liner is relatively ea...
RAZOR 200 PULSE Full Setup Guide
Просмотров 17 тыс.2 года назад
In this video we run through a complete setup and walkthrough of the interface of the RAZOR 200 PULSE MIG/TIG/STICK Welder. RAZOR 200 PULSE - unimig.com.au/product/razor-200-pulse-mig-tig-stick-welder/ Website - unimig.com.au/ Facebook - unimigwelders Instagram - unimig The all-new RAZOR 200 PULSE has arrived. As our latest innovation in pulse MIG, this machine comes ...
How To Set Up & Use A UNIMIG TIG Foot Pedal
Просмотров 15 тыс.2 года назад
A foot pedal, or foot control, can be used to control the amperage of your welder while you’re welding. Weld getting too hot? Ease off the pedal and lower the amps, which lets the weld cool. The foot pedal gives you complete control without having to stop in the middle of a weld and readjust. unimig.com.au/how-to-set-up-and-use-a-tig-foot-pedal/ ⏰ Timecodes ⏰ 0:00 - Intro 0:34 - Why Do I Need a...
VIPER CUT 30 Mk II Complete Setup Guide
Просмотров 5 тыс.2 года назад
In this video we run you through the Complete Setup guide for the VIPER CUT 30 Mk II Plasma Cutter. VIPER CUT 30 Mk II - unimig.com.au/product/viper-cut-30-mk-ii-plasma-cutter/ Website - unimig.com.au/ Facebook - unimigwelders Instagram - unimig Cut anything, anywhere. Whether it’s solid or perforated metal, you’ll get a clean cut up to 12mm thick. Now with the additi...
T2 Torch Consumable Setup Guide
Просмотров 6 тыс.2 года назад
Our new starter and SUPER series kits come with every single part you need to get your torch working. But there are a lot of different consumables that make up a TIG torch, and our T2 TIG torches are new different. That's why we've put together a full guide on how to set up your TIG torch, whether you've got a ceramic or quartz or SUPER cup. T2 TIG Torch Consumable Starter Kit: unimig.com.au/pr...
T2 Torch Heads Walkthrough
Просмотров 2,7 тыс.2 года назад
Our brand new T2 TIG Torch heads have arrived, so now you can use standard consumables and arc torchology consumables on the same torch. We've got a step by step walkthrough of how to take the original torch head off and how to replace it with our new standard size 17 or size 26 torch heads. Now there's no need to chuck out your old or spare consumables, just grab one of our interchangeable tor...
PAPR Helmet Walkthrough / Setup
Просмотров 1,2 тыс.3 года назад
PAPR Helmet Walkthrough In this video we give you a complete walkthrough of the UNIMIG Powered Air Purifying Respirator kit. The PAPR provides industrial level protection for the most extreme welding applications and environments where an effective and reliable eye and respiratory protection is an absolute must. The 12-volt, 4400MAh lithium-ion battery provides for up to 8 hours use on level 1,...
How To Weld up A Unwanted Hole (Tig Welding)
Просмотров 5803 года назад
In this episode, we teach you how to plug unwanted holes in the most effective way using the TIG process If YOU have any TIPS and TRICKS you would like to know, drop us a comment and we will be sure to feature them in upcoming episodes.
What Gas Should YOU Use When Tig & Mig Welding?
Просмотров 8 тыс.3 года назад
In this week's episode, we tackle the differences between Active & Inert Gases when MIG or TIG welding If YOU have any TIPS and TRICKS you would like to know, drop us a comment and we will be sure to feature them in upcoming episodes
How to PULSE TIG Weld!
Просмотров 1,4 тыс.3 года назад
In this episode, we will explain the Pulse function when TIG Welding, going in-depth about when and why you should use this process If YOU have any TIPS and TRICKS you would like to know, drop us a comment and we will be sure to feature them in upcoming episodes
VIPER 180 AC/DC - DC & DC Pulse Welding Setup Guide
Просмотров 2,1 тыс.3 года назад
In this video, we run you through the DC & DC Pulse setup Guide for the VIPER 180 AC/DC 00:00 DC TIG Welding Setup Guide 06:40 DC TIG PULSE Welding Setup Guide VIPER 180 AC/DC - unimig.com.au/product/viper-180-ac-dc-tig-welder/ Website - unimig.com.au/ Facebook - unimigwelders Instagram - unimig The VIPER™ 180 AC/DC TIG & STICK Welder was made for the handyman who wan...
VIPER 180 AC/DC - Stick Welding Setup Guide
Просмотров 1,2 тыс.3 года назад
VIPER 180 AC/DC - Stick Welding Setup Guide
VIPER 180 AC/DC - AC & AC Pulse Welding Setup Guide
Просмотров 4 тыс.3 года назад
VIPER 180 AC/DC - AC & AC Pulse Welding Setup Guide
VIPER 180 AC/DC - Complete Welding Setup Guide
Просмотров 11 тыс.3 года назад
VIPER 180 AC/DC - Complete Welding Setup Guide
How to Weld Stainless Steel to Mild Steel (TIG WELDING)
Просмотров 3,8 тыс.4 года назад
How to Weld Stainless Steel to Mild Steel (TIG WELDING)
VIPER CUT 30 - Non-Ferrous Metal Cutting Setup Guide
Просмотров 1 тыс.4 года назад
VIPER CUT 30 - Non-Ferrous Metal Cutting Setup Guide
VIPER CUT 30 - Ferrous Metal Cutting Setup Guide
Просмотров 1,1 тыс.4 года назад
VIPER CUT 30 - Ferrous Metal Cutting Setup Guide
VIPER CUT 30 - Complete Cutting Setup Guide
Просмотров 10 тыс.4 года назад
VIPER CUT 30 - Complete Cutting Setup Guide
What Polarity should YOU use for MIG welding?!
Просмотров 17 тыс.4 года назад
What Polarity should YOU use for MIG welding?!
How to get rid of holes in your STICK welds!
Просмотров 1,3 тыс.4 года назад
How to get rid of holes in your STICK welds!
ONE Easy Trick To Fix Your MIG Welds!
Просмотров 1,7 тыс.4 года назад
ONE Easy Trick To Fix Your MIG Welds!
How to use a DC Lift Arc TIG Torch!
Просмотров 33 тыс.4 года назад
How to use a DC Lift Arc TIG Torch!
How to Prepare Aluminum for TIG Welding
Просмотров 4894 года назад
How to Prepare Aluminum for TIG Welding
Can't stand lift arc. Just too much risk in compromising the electrode.
With respect, Unimig publish this video because ? So if I have one of these machines how do I know if I need this upgrade and where does the USB stick come from ? Are recent machines sold all updated. ? Thanks.
Wow, one of the best welder demos I’ve seen, instead of flooding us with heavy rock music and pointless clips like some other brand. This is how you present a product, thanks.
I have an older tig -stick Lincoln 300 made in the 70s that can use the pedal on tig or stick and it is very useful on both 👍🏻
Dont weld on Ned Kelly's helmet!! That is a priceless historical artifact! Shame on you
Got it. 👍 I'll give it a go. But wait... I only have two hands, how do I do all three things at once?
That is not a proper vertical up
My helmet won’t autodarken
Hi there, sorry to hear about this. Which model helmet do you have?
Should I be getting a e13 code when I flick the power switch off?? Have it plugged straight into a wall socket and tryed multiple, have not set any settings or used for any welding yet, set to 10amp mode also??
Hi Daniel. yes this is normal to have this error code pop-up. E13 means under-voltage which is normal when switching the power off.
find a good welder to demonstrate a nice vertical up, that will sell your brand. all you done here is showing me Not to buy unimig welders.
Can you add foot pedal on any tig?
@@unimigsupport i have Wurth 200 s ac/dc
When can we get a new video for a setup guide on the new razor 200 ac/dc tig welder?
Hi Aaron, this is what the media team is working on currently it will be out soon!
When can we get a new video for a setup guide on the new razor 200 ac/dc tig welder?
Hi Aaron, this is what the media team is working on currently it will be out soon!
When can we get a new video for a setup guide on the new razor 200 ac/dc tig welder?
Hi Aaron, this is what the media team is working on currently it will be out soon!
When changing to a graphene liner do you still keep the 10 in or so of metal liner into the gun or do you remove the metal guide liner completely and have the liner all graphene?
If I had a choice between this model and the older model is there much of a difference?
If I had a choice between this model and the newer model is there much of a difference?
I’m still trying to get a decent weld with this machine! The only thing I haven’t changed is the gas, how common is it to get a bad bottle of argon? I have tig welded stainless steel in my previous job but even stainless on this machine I just can’t get a steady arc and puddle. It seem all over the place!
@@unimigsupport2.4 Zirconiated, 3mm aluminium, 140amp but I’m using a foot pedal so probably not using near that limit. Argon speed gas 9 lpm. 2 pre-gas 4 post-gas 3+ Ac balance,120 hrs. I’ve adjusted everything but nothing really changes
It would be best to send us some photos so we can visually see your welding results. Your settings seem right it could be a polarity issue is your torch plugged into the negative outlet?
Using a cordless drill to spin the tungsten to sharpen makes life easier and faster.
If I understood the comments correctly, the 4in1 230 does not support water cooled tig torches...is that right?
That is a personal choice. You can order an aftermarket CK worldwide torch and water cooler setup with a switched outlet.
The devil is in the detail and details are not here. I'm very disapponted with the video and the product itself. It doesn't come with tip wrench. No explanation how to remove the tip. Yeah you can use pliers everywhere but normally people use wrenches instead of pliers. F groove not explained what is this. So you basically need google quite a lot.
Awesome Video, Thank you soo much, just gotten back on the sticks after many years off. And thank You Unimig for an those amazing well priced welders, had a unimig in the past and just got a new viper 165 kit. Cheers
If only unimig tech support could watch this video so they would understand how the machine is supposed to work. Then maybe they would stop telling people there's nothing wrong with their machine when their welder has failed, and maybe they could look into actually fixing the design problem that causes them to fail after 12 months. But sadly, no.
👍
Мечта! 👍👍👍
Guys put short ads on that can't skip. That was really helpful and makes me want this machine more. Why not get abit of extra coin. My old unimig built the works. Bulletproof.
So what is yhe ipdate doing for the machine ? Where do we get the update from ?
can you tig weld alloy in ac without the gas?
Hi there, no for AC TIG welding 100% Argon is needed.
Is it recommended that you use gloves during the upgrade process?
if you’re welding at the same time I think it’s better to be safe
I'm struggling to decide between your new TIG 200 AC/DC & the 230 Multi on the TIG features as in some respects the 230 Multi seems equivalent. Does the 230 Multi have TIG Lift Arc & is it correct that the 200 AC/DC can TIG weld more material types versus the 230 Multi?
Thanks for the reply. One last question - is the TIG 200 AC/DC a better TIG machine & if so why is that? Cheers.@@unimigsupport
Super helpful
I did this and got electrocuted.......
I did the same and I was also electrocuted. (I am currently sending this message from heaven.)
@@CamperKev What's the weather like?
@@adamwilliams5426 Warm and sunny with a slight breeze. Not as hot as hell.
What about the fumes that are produced during welding? aren't they dangerous? how to protect oneself from the damage caused by fumes?
Respirator
THANK YOU for a concise, no nonsense video!
Just got mine, omg 😮 beautiful machine, never thought ild ssy that Haha 😅
Best use of 24 seconds ❤
How thin of a material can it go?
Im in New Zealand - I thought this was a really useful video. Thank you so much.
I wanna be a welder but I don’t wanna get burnt I saw a guy welding on this big tube thingy on a car ride I was like shit but I didn’t get burnt I thing it was the light hitting the tube or I was far enough away idk he was maybe 50ft
well what a waste of time this vid was to quick no info how to change
Hi Lennie the video showed how to switch the polarity using the polarity cable at the front of the machine. If your machine uses a different mechanism follow this guideline. For Self-Shielded flux-cored use a negative connection to your machine and use a positive connection for your ground (earth) lead. For gas welding use a positive connection to your machine and a negative connection for your ground (earth) lead. Hope this helps!
Well you sold me, I will be grabbing one of these asap. It makes my 20yr old mig look like a dinosaur
Is there anyone out there that understands the 20,000 different settings and would know how to adjust any of them to improve your weld, this machine is insane, and quite seriously too bloody complicated. !!!!
Good quick and right to the whole point! Thanks
"Wave form must be on DC to do AC weld". Please clarify that part for me. I thought it should be on those other ac wave forms beside dc wave form to do AC welding.
Are these able to run off a generator?
Absolutely love my new Multi 230, so quick to set up and such a pleasure to weld with. Only wish I had waited a little longer so I could have got the new bundle with bonus helmet.
I just bought Unimig 2030 and need to changes liner for aluminium but I can't get any 4 meters, they only have 3 meters on stock. Where I can get 4 meters?
So, can I use my 25% C02/argon mix for Tig, even if the electrode type recommends either argon/helium or straight argon? Or... ??
Did you find out the answer to this?
Hey all. I'm new to this welding game so I have a question about the Lift TIG torch if u have a minute to answer.. I bought a DEKOPRO 2 in 1 Stick/ Lift TIG welder. What is Lift TIG and do I need gas for this function or is it the same as the stick welder?? Scratch to get ur ARC going?? Any advice would be greatly appreciated lads.. Thanks in advance but I will reply to thank u if u can answer my question.. Salute from Dublin, IRELAND!