![JBN Shop](/img/default-banner.jpg)
- Видео 26
- Просмотров 204 108
JBN Shop
США
Добавлен 1 апр 2018
Shop projects and builds for food plots, farming, firewood and others.
Caught up in the shop 2 (Chevy C60 Cabover)
Struggling through more wiring on the two speed rear end of the C60.
Просмотров: 150
Видео
Caught up in the Shop 1 (Chevy C60 Cabover)
Просмотров 2586 месяцев назад
Working on the wiring for my 1971 C60 two speed rear end.
Rebuilding a Blade Pivot JD 350
Просмотров 29310 месяцев назад
Second video where I walk through how I repaired the pivots on my JD 350 bulldozer.
Bulldozing a road on a rocky hillside (John Deere 350
Просмотров 15 тыс.Год назад
Leveling out a hillside road so we can reach the back part of our property.
Adding a chainsaw sheath to my bulldozer (John Deere 350)
Просмотров 2,5 тыс.Год назад
Adding a quick and dirty chainsaw sheath to my bulldozers cage.
Clearing a hillside with a bulldozer (John Deere 350)
Просмотров 13 тыс.Год назад
Clearing a hillside so we can plant maple and oak trees again.
Fixing a Gehl Skid Steer Bucket
Просмотров 541Год назад
Fixing a cracked bucket for a Gehl Skid Steer.
Rebuilding a Bulldozer Blade PT 1
Просмотров 539Год назад
Rebuilding a John Deere 6310 bulldozer blade. First up was the cutting edge replacement as the old one was well past due to be replaced.
Building a Root Rake for a Bulldozer Part 2
Просмотров 1,4 тыс.Год назад
Finishing off building a root rake for my John Deere 350. Excited to put this to use this coming spring and summer.
Building a Root Rake for a Bulldozer Part 1
Просмотров 2,6 тыс.Год назад
Building a root rake for my John Deere 350 Dozer. Had to split it into two parts because of timing on the project.
Build a FOPS for my John Deere 350 Bulldozer
Просмотров 1,1 тыс.Год назад
Building a falling object protective structure (FOPS) for the 350. Should make it much safer to work in the woods next year. This video is the start of a short series where I'm addressing small issues or projects on the dozer over the winter.
Cutting atv trails with John Deere 350 Bulldozer
Просмотров 63 тыс.Год назад
Running our John Deere 350 bulldozer and making some new atv trails
Planting Pumpkins 2022
Просмотров 199Год назад
Short video showing off our homemade transplanter and the 2022 pumpkin harvest.
Finishing off a clearing with John Deere 350 Bulldozer
Просмотров 11 тыс.Год назад
Short video finish grading a small clearing with our 350 bulldozer.
One Year of Wheel Spacers on the 3039R
Просмотров 3,4 тыс.2 года назад
One Year of Wheel Spacers on the 3039R
Proving Wheel Spacers on a John Deere 3039R
Просмотров 10 тыс.2 года назад
Proving Wheel Spacers on a John Deere 3039R
Checking Wheel Spacers on the 3039R
Просмотров 3,5 тыс.3 года назад
Checking Wheel Spacers on the 3039R
JOHN DEERE 3039R SMOOTHING A HILLSIDE
Просмотров 9 тыс.3 года назад
JOHN DEERE 3039R SMOOTHING A HILLSIDE
John Deere 3039r getting unstuck with your loader
Просмотров 16 тыс.3 года назад
John Deere 3039r getting unstuck with your loader
JOHN DEERE 71 MARKER DESIGN PROOF OF CONCEPT
Просмотров 2,7 тыс.3 года назад
JOHN DEERE 71 MARKER DESIGN PROOF OF CONCEPT
Testing Wheel Spacers on a John Deere 3039r
Просмотров 7 тыс.3 года назад
Testing Wheel Spacers on a John Deere 3039r
Planting Corn with John Deere 2 Row Planter
Просмотров 14 тыс.6 лет назад
Planting Corn with John Deere 2 Row Planter
Great work man! Nice machine. Actually looking for one now.
That’s a nice looking dozer for a 1966. Sounds good also.
Good job! Experience is a great teacher!
Got any specs on build ?
Nice job! Looks great!
That’s awesome!
Great job. Impressive.
Impressive design and fabrication work. Well done.
Thanks for sharing👍 That 350 did a really nice job for the size of the dozer.
🟢 Love my BORE Spacers.! Put 4" spacers on Front and Back of my 2022/3046r Cab Tractor.!!! 🟢 ✴️ROCK Solid.!!!✴️
I see you have a brush rake. It is similar to the one I built for my D4. Good job you are doing there.
Great idea but I think you will be much happier with it a bit lower and about 45 degree instead of vertical, it won't fall out. I mix my oil in an old 1 qt. oil jug to keep it fresh and bar oil is in dish soap bottle for ease of handling. For what you're doing gas and oil could easily be on the screen also. Doing a great job. Greetings from the farm near Battle Creek, Mi.
You're doing a great job and pretty impressed with your work. Not your fault for cracks anyplace. In the 80's my buddy building pole barns on his own bought a J.D. 350. Amazing what the cute little thing can do but before long it was leaking coolant into the oil so I put new sleeves and pistons in it. Ran great but turns out it had a big crack in the frame than had been welded before. About midway of tracks. He eventually got divorced and dozer had to go of course. I'm certain it had a different style blade set up than yours though. A more modern design I think. Nice video, Thanks.
You might want to get a rops or some type of protective cab! It will save you from a lot of abuse working in the woods! Great sounding solid older machine ! Blessings to you and stay safe!
I ended up building a ROPS this past winter. Best thing I ever did.
Those are good little machines
Great videos, l have the same problem with the elongated holes in the blade mounts,you mentioned you had filmed how you reworked them but havent had time to post it.i have some ideas but would love to see how you approached it. Thanks,Dean
gouge off the skin and do it right or you will regret it later
Its on my mind, but I'm trying to find someone willing to bend a wear resistant steel for me.
Nicely done, would a plow be justified in your area? My smaller 2320 plows much faster than my loader in up to 8 inches of snow. All the best and God Bless. 🙏❤🇺🇸
What grapple model is that? Happy with it?
😉 *promo sm*
I have a 12,000 12 volt winch that i can hook to a tree to get out, works good and with a snatch block it will pull twice as much. Have fun!!
I have a 350B i love it, yours runs great, it can do a lot of work!! Have fun!!
I guess you guys have a lot heavier soil than we do here in southeast Missouri. I run a 6 foot tiller on my 3039r and ran it on my 3038e at max depth of 7 inches with plenty of hp to spare. Tills it up into powder.
Deere has a real nice section in manual that gives spacing
Nice work! Hope there's a part 2!
Nice job! Need to do this to a 450 with a backhoe
Love the ole dozer great work
Do you know how much pull you need to lift markers.
When I bought my property in 1990 ,I bought a 350 with 6 way blade. The undercarriage was beat ,but I just went easy with it and used it for years. Sold it for twice what i paid for it. 😁
Nice job on the trail. I operated one of those JD 350’s years ago except the one I used had a six way blade. Super handy and capable little dozer.
Is the blade staying level a feature or a sign of wear?
It takes 3 whole seconds to go to neutral, wait a second then change direction without riding a wheelie. Damn, these machines are 50 plus years old. Ease up on them. They'll run forever if you take care of them.
I think that's a 253 Detroit John deere used them back then
3 cylinder deere
That's a small but very capable dozer. I am impressed. The operator is also very capable. Blessings from Australia.
H, i I have a 350b dozer, it is a great machine. In the dead of winter -15 F in northern NY I start it with a paint striping heat gun, blowing it into the air intake, (take the air cleaner off) I do it for a about a minute before trying to start it. It works every time for me, Good luck and have fun!
I'll have to remember that one! Right now the dozer is parked for the winter while it gets some much needed upgrades (FOPS, new blade components, and a root rake) but I'll have to remember that if we wanna do some winter logging!
Just a little more, I leave it on and pointing down the intake pipe when cranking and when starts until it is running on all cylinders , Good luck and have fun!!
I wish I had a tiny dozer.
His atv must be a Humvee
its good to hear old iron run, nice machine!
Sounds like a gas motor
Its actually has the diesel motor
I think it's a 253 Detroit diesel John deere used them back then
you must always work harder for yourself than you do for any place else after all they only pay you to get by not ahead
I am a bit late to viewing this video (now a new subscriber)., but your comment(s) about the various problem(s) with this little dozer… Well it looks to me like it is doing just fine.., that little unit is worth its’ weight in gold. Even with the little things it will get a lot of work done.. Great video, Thank you sir.
Thanks for the subscribe and the kind words. The dozer does work as it is for sure and I can still get a lot of work done, but the blade pins are more or less shot and can no longer angle left and right. I plan to fix it this winter, but just need to find the material to do so. Thanks!
I have the same machine , is yours a gas or diesel? Ours is a 3 cyl gas
Good running dozer, good job.
High blade 🤦
Looks good
Buckthorn a problem in the peoples socialist republic of western New York. I had three acres full of it. I cut the bigger stuff and brush hogged the rest. Well under control but like leftist politicians it’s impossible to completely eradicate.
Good job!.
That’s not an ATV trail, that’s a dirt road
That's what I was thinking, it's almost starting like wheelchair access. Anyway, it looks like fun. I'm still a little boy that want to play in the sand box and let my imagination go where it goes.
Had r4’s on my last tractor for muddy woods, were horrible. R14’s on my new tractor I can drive through stuff in 2wd that my r4’s could not handle in 4wd
Gives you more room for tire chains too.
I have a 350B as well, Mine has the inside 6-way blade and ROPS - great little dozers
I think this guy would appreciate a 6 way. So much easier