MCMROSE
MCMROSE
  • Видео 59
  • Просмотров 349 998
Project 97 2 Door Tahoe Update #28 - New Front Gears Installed (4:30's) & More New Problems 🤦‍♂️
On Project 97 2 Door Tahoe Update #28 I finally get to installing my new front gears (4:30's). It took roughly 8 hours start to finish but I imagine it could take half of that if everything went smooth. I did scrub, clean, and repaint it too though. After install, everything is great!!! No gear noise or anything and the 4 wheel drive works great again!!
But...after installing the gears, I did some touchup to the paint and actually caused more paint issues then what I was trying to fix 🤣 I swear it is never ending sometimes with this rig.
On top of the paint, I noticed that my power steering was leaking from the pitman arm seal area. That is why cheap remanufactured parts are no good. So, I...
Просмотров: 118

Видео

New Oil Pan And HEI Distributor - 1985 k20 Square Body Project Episode #10
Просмотров 173 месяца назад
On Episode #10 of the 1985 k20 Square Body Project, I pull the oil pan and replace it with a new aluminum pan and feel pro gasket (links below). I also add Driven Motor Oil and a new MSD HEI Distributor. After doing this and re-timing everything, it run better then ever! I think the new distributor played a huge part. Oil Pan: amzn.to/3T6ol8N Feel Pro Gasket: amzn.to/3Z2oTA8 MSD HEI Distributor...
8" Skyjacker Soft Ride Lift Installed - 1985 k20 Square Body Project Episode #9
Просмотров 863 месяца назад
On This Episode of 1985 k20 Square Body Project Episode #9 we show off the new 8" Skyjacker Soft Ride Lift Installed. Now I temporarily have a set of 38.5 x 14.5 x 16.5 TSLSX Super swampers on there, but I do plan on going with 35x15.5x16.5 TSLSX's. I like the extra clearance and a little wider :-). You can follow me at my website and on social media below: Website: www.mcmrose.com Facebook: fa...
Prize Kingdoms Game Review - I Cashed Out $1,000 & It Is Still Growing - INK ID: MCMROSE
Просмотров 2574 месяца назад
Here is my Prize Kingdoms Game Review. I have cashed out more than $1,000 so far and it is still growing. I don't say that to brag at all. I seriously thought I was going to make $100-$200 and that would be that. It has gotten insane at this point! Join the action and make some for yourself! Sign up for an INK ID here: dashboard.inkgames.com/sign-up Referal Code: MCMROSE Sign Up For Prize Kingd...
1985 k20 Square Body Project Episode #8 Installing The Rear Springs, Painting The Frame & New Tank!
Просмотров 637 месяцев назад
On episode #8 of the 1985 k20 Square Body Project I install the new rear springs from the 8" Skyjacker soft ride kit. That includes 6" soft ride springs, 2 inch blocks, and shims (to steepen the angle). I also installed a new drivers side gas tank and new sending units for both tanks. The old tank had build up in it and for $160 it was just easier to get a whole new tank. I also cleaned the fra...
1985 k20 Square Body Project Episode #7 - Pulling The Bed Off And Cleaning Everything Up Part 1.
Просмотров 617 месяцев назад
On Episode #7 of the 1985 K20 project, we start pulling the bed off the truck and cleaning everything up getting ready to install the new rear springs and shocks. You can follow me at my website and on social media below: Website: www.mcmrose.com Facebook: Mcmrose-2001... Twitter: mcmrose1 Pinterest: www.pinterest.com/mattrose1978/ Google Plus: plus.google.com/u/0/10212...
1985 k20 Square Body Project Episode #6 - Installing New 8" Skyjacker Soft Ride Suspension!
Просмотров 987 месяцев назад
1985 k20 Square Body Project Episode #6 We start installing the New 8" Skyjacker Soft Ride Suspension. In doing so I ran into some issues that I show in the video. You can follow me at my website and on social media below: Website: www.mcmrose.com Facebook: Mcmrose-2001... Twitter: mcmrose1 Pinterest: www.pinterest.com/mattrose1978/ Google Plus: plus.google.com/u/0/1021...
Project 97 2 Door Tahoe Update #27 - LS Is Running! Full Update, Exhaust And Final Thoughts!
Просмотров 1,2 тыс.8 месяцев назад
On Project 97 2 Door Tahoe Update #27 - The 5.3LS Is In And Running! I'll do a full update including all new dual 3" Exhaust and my final thoughts on everything! You can follow me at my website and on social media below: Website: www.mcmrose.com Facebook: Mcmrose-2001... Twitter: mcmrose1 Pinterest: www.pinterest.com/mattrose1978/ Google Plus: plus.google.com/u/0/102123...
Project 97 2 Door Tahoe Update #26 - Final LS Wiring & General Overview Of The Install In The Tahoe!
Просмотров 33711 месяцев назад
On this episode of Project 97 2 Door Tahoe Update #26 - We go over the Final LS Wiring & take a general overview look at the install in the Tahoe! This took time, money, and patients, but it is almost ready to go! In the next video, it will be running. Then we will go over other stumbling blocks we hit along the way (there are many) so you can judge for yourself if this is a path you want to ta...
Project 97 2 Door Tahoe Update #25 - New Transmission Ready To Install And Engine Bay Update!
Просмотров 11411 месяцев назад
Project 97 2 Door Tahoe Update #25 - The New Transmission is Ready To Install And the Engine Bay is all cleaned up and ready to go! I will include links below to the fuel line I was talking about and the Por15 Paint I used as well :-) 6AN Fuel Line Kit: amzn.to/3NIKdUS Extra Fuel Fittings I Got: amzn.to/48tT3hm Por15 Gloss Black: amzn.to/3RYkJW0 You can follow me at my website and on social med...
Project 97 2 Door Tahoe Update #24 - The decision was made...The New 5.3L LS Motor with a few mods!
Просмотров 17911 месяцев назад
Project 97 2 Door Tahoe Update #24 - The decision was made...The New 5.3L LS Motor with a few mods happened! It was a tough call honestly. I added up costs on both ends, and decided that it was so close, that I would just take a chance and go with the LS! You can follow me at my website and on social media below: Website: www.mcmrose.com Facebook: Mcmrose-2001... Twitter: twitter.c...
Project 97 2 Door Tahoe Update #23 - Used Engine Purchase, Transmission Rebuild, & Transfer Case!
Просмотров 191Год назад
On this episode of project 97 2 door Tahoe, we got another lower milage used 5.7 Vortec to work from. Not sure if that will work out, but we will find out! We also pulled the transmission as we might as well get that rebuilt as it has 240,000 miles and probably at the end of it's life. We also pulled the transfer case so we can finally do the original job right and get a SYE ( Slip Yoke Elimina...
Project 97 2 Door Tahoe Update #22 - Engine Teardown Part #2 - Well That Got Expensive Quick 🤣
Просмотров 134Год назад
On this episode of project 97 2 door Tahoe, we go a little further on the teardown then I was expecting....and by little further I mean all the way!! (thatwhatshesaid). So this big question is, now what? Rebuild the old, buy a new 5.7, or take the plunge and get a 5.3ls?! You can follow me at my website and on social media below: Website: www.mcmrose.com Facebook: Mcmrose-2001... T...
Project 97 2 Door Tahoe Update #21 - Engine Teardown Part #1 - Coolant Sippin 5.7L Vortec 🤣
Просмотров 112Год назад
On this episode of project 97 2 door Tahoe, we try and track down the mysterious disappearing coolant 🤣 Who knows where this may lead...... You can follow me at my website and on social media below: Website: www.mcmrose.com Facebook: Mcmrose-2001... Twitter: mcmrose1 Pinterest: www.pinterest.com/mattrose1978/ Google Plus: plus.google.com/u/0/102123798... Instagram: inst...
Project 97 2 Door Tahoe Update #20 - New Headliner!
Просмотров 1,2 тыс.Год назад
In episode #20 of Project 97 2 Door Tahoe, I attempt to remove and install a new headliner! It wasn't perfectly smooth, but you will get to see how it went. Here is the video I watched on removing the foam backer/ old glue: ruclips.net/video/krW5Fo1lGCM/видео.htmlfeature=shared You can follow me at my website and on social media below: Website: www.mcmrose.com Facebook: Mcmrose-200...
1985 k20 Square Body Project Episode #5 - New Steering Wheel And New Seat!
Просмотров 85Год назад
1985 k20 Square Body Project Episode #5 - New Steering Wheel And New Seat!
Project 97 2 Door Tahoe Update #19 - New Differential With Limited Slip and Different Tires!
Просмотров 322Год назад
Project 97 2 Door Tahoe Update #19 - New Differential With Limited Slip and Different Tires!
INK Id Referral Code: MCMROSE
Просмотров 175Год назад
INK Id Referral Code: MCMROSE
1985 k20 Square Body Project Episode #4 - New Exhaust And Rain Gutter Leak Fix!
Просмотров 150Год назад
1985 k20 Square Body Project Episode #4 - New Exhaust And Rain Gutter Leak Fix!
1985 k20 Square body Project Episode #3 - Fixing The Brakes! Willwood Brake Booster And New Fender!
Просмотров 239Год назад
1985 k20 Square body Project Episode #3 - Fixing The Brakes! Willwood Brake Booster And New Fender!
Project 97 2 Door Tahoe Update #18 - New Pace Setter ARMOR Coated Headers. Exhaust Leak Fixed :-)
Просмотров 315Год назад
Project 97 2 Door Tahoe Update #18 - New Pace Setter ARMOR Coated Headers. Exhaust Leak Fixed :-)
GM Touch Screen Radio Problems Fix! 2017 GMC Denali 2500 HD 8" Touch Screen Radio Works Again!
Просмотров 194 тыс.Год назад
GM Touch Screen Radio Problems Fix! 2017 GMC Denali 2500 HD 8" Touch Screen Radio Works Again!
1985 k20 Square body Project Episode #2 - Fixing the bugs and buying some initial parts!
Просмотров 150Год назад
1985 k20 Square body Project Episode #2 - Fixing the bugs and buying some initial parts!
A New Truck Project Is Here 😁 Out With The Old & In With The Older 😂
Просмотров 1542 года назад
A New Truck Project Is Here 😁 Out With The Old & In With The Older 😂
Project 97 2 Door Tahoe Update #17 - Fixed! Tahoe Rides Smooth/ Great Again! Learn From My Mistakes!
Просмотров 2,7 тыс.2 года назад
Project 97 2 Door Tahoe Update #17 - Fixed! Tahoe Rides Smooth/ Great Again! Learn From My Mistakes!
Project 97 2 Door Tahoe Update #16 - Rear Track Bars, New Driveline and continued vibration issues.
Просмотров 6612 года назад
Project 97 2 Door Tahoe Update #16 - Rear Track Bars, New Driveline and continued vibration issues.
Project 97 2 Door Tahoe Update #15 - Black Bear Performance CPU Upgrade! One Of The Best Mods Yet!
Просмотров 8 тыс.2 года назад
Project 97 2 Door Tahoe Update #15 - Black Bear Performance CPU Upgrade! One Of The Best Mods Yet!
Project 97 2 Door Tahoe Update #14 - New Kryptonite Death Grip Tie Rods 1988-1999 Upgrade!
Просмотров 3,7 тыс.2 года назад
Project 97 2 Door Tahoe Update #14 - New Kryptonite Death Grip Tie Rods 1988-1999 Upgrade!
Project 97 2 Door Tahoe Update #13 - Kilmat Sound deadening for the Tahoe
Просмотров 6 тыс.2 года назад
Project 97 2 Door Tahoe Update #13 - Kilmat Sound deadening for the Tahoe
Project 97 2 Door Tahoe Update #12 - New 6 Inch BDS Lift With 35x12.50x20's on 20x12 Moto Metals! 😱
Просмотров 7 тыс.2 года назад
Project 97 2 Door Tahoe Update #12 - New 6 Inch BDS Lift With 35x12.50x20's on 20x12 Moto Metals! 😱

Комментарии

  • @MatthewBasson-v6o
    @MatthewBasson-v6o 12 дней назад

    Mine does the exact same thing

  • @tonyda2656
    @tonyda2656 14 дней назад

    Just ordered mine...thank you friend.

    • @MCMROSE
      @MCMROSE 14 дней назад

      Happy to help!

    • @tonyda2656
      @tonyda2656 2 дня назад

      @@MCMROSE I had it installed today (ordered from your vendor)...it resolved the left-side (dead screen). I did have to reset-up the bluetooth pairing and internet connection. So far so good.

    • @MCMROSE
      @MCMROSE 14 часов назад

      @@tonyda2656 Awesome!

  • @DaveWest410
    @DaveWest410 18 дней назад

    Hey guys, i was having a very similar problem. I wanted to share that i used an ArmorAll glass wipe on the screen and it temporarily fixes it.

  • @JNatella
    @JNatella 18 дней назад

    2016 yukon here, and this started recently. I know it's just gonna get worse. These cars were built to break

    • @MCMROSE
      @MCMROSE 18 дней назад

      Ya, just sourcing cheap parts to save $$. Luckily we can fix them with cheap parts too 😂

  • @scottmcdonald6595
    @scottmcdonald6595 20 дней назад

    I just replaced the digitizer today. My truck screen is still having the same issues. I did the best I could lining up the new digitizer on the metal frame, but I'm wondering if I didn't get it on there just right. Could it being misaligned slightly cause the problem to continue? I am about to just disconnect the digitizer and go forward using the buttons without a touch screen.

    • @MCMROSE
      @MCMROSE 20 дней назад

      Hi Scott, I'd say at that point it is something else or...on the off chance you got a bad screen, but that is pretty rare. Were you are, I'd want a car audio shop to look and see if they can help. The dealer will charge too much just to try then basically replace the whole unit. My backup plan if I were in that spot would be to just replace the whole unit and be done with it.

    • @scottmcdonald6595
      @scottmcdonald6595 20 дней назад

      @@MCMROSE Some of the phantom touches also change the screen in the instrument panel. It will switch from info mode to audio mode. Why would a bad digitizer also be affecting that screen? I'm wondering if it is something else other than the screen. Maybe something on the circuit board, or a bad connection somewhere else behind the dash.

  • @cole-trickle50
    @cole-trickle50 21 день назад

    Today after 2 years of Issues I bought a new Digitizer / Screen off of Ebay . Pulled the trim panel off , a few screw and connectors removed and the radio comes out . About 8 screws , 3 ribbon removals and the old screen is out . Put the new screen in and install in Reverse and its Good as new again . What a MAJOR relief that it works like new again . $55 and an hour of my time is all it cost . You get the whole unit not just the glass , no glueing or any of that

    • @MCMROSE
      @MCMROSE 20 дней назад

      Awesome! Glad it worked for you!

    • @scottmcdonald6595
      @scottmcdonald6595 20 дней назад

      Do you have a link for the whole unit? I tried replacing the digitizer and still have the same issue.

    • @cole-trickle50
      @cole-trickle50 20 дней назад

      @@scottmcdonald6595 This is what I bought , easy removal & install . Works like new again

  • @mikeydejon2148
    @mikeydejon2148 26 дней назад

    I regret lifting my 1996 k1500 with 4 inch lift. Although it looks great seems like lot of vibration. Should've listened to my dad when he said leave it alone lol! Does look good with 33s and bullet holes though. Anyhow i tend to learn hardway. My trans just blew now. 🤣

    • @MCMROSE
      @MCMROSE 24 дня назад

      Ya, I didn't have any problems till I lifted it. Part of having the look, but not cost effective 🙂

  • @SteveCincurak
    @SteveCincurak 26 дней назад

    Watched your video a year ago as my 2018 Silverado was experiencing almost the same symptoms, it was very annoying..I ordered a replacement screen on EBay for about $20. Swapped it out and everything worked perfectly. It’s been a year now since the change and it’s still working perfectly. Thankyou for your video it was enormously helpful

    • @MCMROSE
      @MCMROSE 26 дней назад

      Awesome, appreciate the update 🙂

    • @MatthewBasson-v6o
      @MatthewBasson-v6o 12 дней назад

      Can you provide a link. Thank you in advance!

    • @MCMROSE
      @MCMROSE 12 дней назад

      @@MatthewBasson-v6o ebay.us/NNatz8

  • @ryank5036
    @ryank5036 29 дней назад

    Would you have to hack the botttom plastic on both sides with a shallow mount double din?

    • @MCMROSE
      @MCMROSE 28 дней назад

      I believe so as it was to make room for the heater controls to move down more. Maybe not, but in my case it was yes.

  • @pats6188
    @pats6188 Месяц назад

    Hi, Mine did the same like yours, I fighted a new Touch Screen to mine and now it works like new once again.

  • @josegarza5150
    @josegarza5150 Месяц назад

    Thank you for that information because my trucks been doing the same thing yours was so I will go to eBay to see if I can find that screen. Thank you for the tips that really helped.

    • @MCMROSE
      @MCMROSE Месяц назад

      Happy to help!

  • @funfun8095
    @funfun8095 Месяц назад

    Did this replacement and now I have a blank screen! No backup camera, even! Worse than before! Ugh!

    • @MCMROSE
      @MCMROSE Месяц назад

      Never heard of it ever getting worse, you may want to recheck all the plugs and steps.

    • @funfun8095
      @funfun8095 Месяц назад

      @MCMROSE Blank black screen is worse. I'm a mechanic, so did everything correctly. Maybe the new glass is faulty, but I didn't expect to lose everything. I hear audio, but blank screen

    • @MCMROSE
      @MCMROSE Месяц назад

      @@funfun8095 Wild, that is a first, I have heard of 1-2 screens being bad out of thousands though, could be it?

  • @danielmcinnis6221
    @danielmcinnis6221 Месяц назад

    You are the man! Have this same issue and it drives me crazy, thank you for this!

    • @MCMROSE
      @MCMROSE Месяц назад

      happy to help!

  • @josephp1117
    @josephp1117 2 месяца назад

    I did put my fist into mine! Damn it. Now I need a new screen!

  • @smackface6
    @smackface6 2 месяца назад

    you got a link for the clear headlights and turn signals the ones i bought didnt look good compared to yours

  • @mdhumayunkabir1308
    @mdhumayunkabir1308 2 месяца назад

    Hello, I have watched all your RUclips videos and your video quality is very good. not SEO your channels and videos. For which your video is not getting good views. If you want to get views on your video then you can contact me. Thanks Imran

  • @Suzukidave
    @Suzukidave 2 месяца назад

    We had this problem and we called SXM and they walked us thru a reset that fixed the problem .

  • @elchampeon8772
    @elchampeon8772 2 месяца назад

    Not gonna lie bro I ordered some headers from EBay and forgot about the EGR rear pipe also. Shit nice fix no doubt.

  • @Krazywithakay762
    @Krazywithakay762 2 месяца назад

    What trans is that

    • @MCMROSE
      @MCMROSE 2 месяца назад

      4l60e

  • @christophersawtelle2558
    @christophersawtelle2558 2 месяца назад

    Hi, getting ready to install Black Bear ECM into my '97 2Dr Tahoe. Anything to do other than plug it in? They sent no instructions. I read something about having to do a crank relearn. Thanks.

    • @MCMROSE
      @MCMROSE 2 месяца назад

      I just unhooked the battery, plugged it in, then hooked the battery back up. Nothing else 🙂

    • @christophersawtelle2558
      @christophersawtelle2558 2 месяца назад

      @@MCMROSE Thanks. Mine came with no paperwork, instructions or anything. They finally got back to me and said '96-'97 don't need the relearn done.

    • @MCMROSE
      @MCMROSE 2 месяца назад

      @@christophersawtelle2558 Ya they just come back packed in a box, just plug and play, but it probably would be a good idea to add instructions :-)

  • @ZELTPLASCH
    @ZELTPLASCH 3 месяца назад

    A few days ago I bought a beautiful used 2017 Canyon All-Terrain but lo and behold it had this issue. I'm SO glad I found this video early on after buying and I bought the screen and glue to fix it. Thanks so much for this!!

  • @taylorh3930
    @taylorh3930 3 месяца назад

    Back end looks lower then the front😥

    • @MCMROSE
      @MCMROSE 3 месяца назад

      Yup, it's been fixed now 🙂

    • @taylorh3930
      @taylorh3930 3 месяца назад

      @@MCMROSE I Just bought a 6" bds for my 98 Z71 I want to retain the factory rake I like the back end heigher then the front does this bds keep the factory rake if I dont crank the bars?

    • @MCMROSE
      @MCMROSE 3 месяца назад

      @@taylorh3930 In the video mine is lower because I took out the add a leaf. It was level at full crank and pretty high. You could then let the front down a bit if you want it leaning forward. I just didn't want the stiff ride with the add a leafs 🙂

    • @MCMROSE
      @MCMROSE 3 месяца назад

      I mean, stiff is nice, just not in the rear 😂

    • @taylorh3930
      @taylorh3930 3 месяца назад

      @@MCMROSE 😂 My 98 has timber blocks from last owner and im ripping them fuckin things out it rides like a old 3 ton

  • @matthewpowers5924
    @matthewpowers5924 3 месяца назад

    Great video. My ‘15 Silverado had the same problem a year ago which resolved after removing and re-inserting the fuse on passenger side fuse box. It returned after I had electrical problems which turned out to be bad battery ( despite Advance Auto using their $3,000 diagnostic machine, telling me the battery, starter and alternator were “ fine “ ). The second time I could not change channels properly with finger or paddle, it would always go to one of the preset channels. I replaced the digitizer and now blank screen, although I do get audio, still goes to one preset channel when I use paddle. I’ve removed radio fuse, blue connection in back of glove box and disconnected negative battery cable, all simultaneously and still no screen. Should I replace motherboard ?

    • @MCMROSE
      @MCMROSE 3 месяца назад

      Wow, I have not seen one have to go this far. Yours defiantly sounds like a different issue. As I have not had experience on that level I don't have an answer for you. If I find one I will comment here again. If you figure it out, please comment here again to help anyone else that has to go that far :-)

    • @matthewpowers5924
      @matthewpowers5924 3 месяца назад

      @@MCMROSE 👍

  • @billybob915
    @billybob915 3 месяца назад

    I recently started having this problem on my 2019 silverado LD, was looking at a pioneer replacement. Took the the assembly out, saw that all around the edges was sandy dust that had worked its way behind the bezel. I'd seen a couple of these videos and wasn't sure if I wanted to go this route. After checking out how it's all put together I cleaned the whole touchscreen from edge to edge before installing it back into the bezel. I haven't had the problem since, so far. I'm not saying these screens don't fail, I retired after 40 years a tech. But before you spend the money, I've seen them priced anywhere from $30 to over $100, give this a try. Taking it apart and putting it back togetther is fairly easy. Good luck with yours!

    • @MCMROSE
      @MCMROSE 3 месяца назад

      Awesome! thank you for sharing.

  • @savagetraining3768
    @savagetraining3768 3 месяца назад

    Yours is coming along nice and your doing a great job. I did the RedHead Quick ratio steering gear box my only complaint is at times when you go to turn from a dead stop it doesn’t turn. You can feel the pump pumping through the intermediate shaft(Cunningham Machine upper/lower) but the box just doesn’t do anything. I’m 18k into mines w/o replacing my motor/trans or rebuilding my diffs yet.

    • @MCMROSE
      @MCMROSE 3 месяца назад

      It adds up quick doesn't it! Yes, I got a Red head and so far so good on it. I'll update that in another video :-)

  • @cartierrowlette2608
    @cartierrowlette2608 3 месяца назад

    Looks good.. I am at a cross road . thinking about rebuilding my 5.7 Vortec or swapping it out to an LS motor. can you give me a lil advice. should I rebuild or swap?

    • @MCMROSE
      @MCMROSE 3 месяца назад

      That sounds like the exact same crossroad I was at. I went obviously the LS route. Knowing what I know now, here are my thoughts: 1. Budget: If you want to spend the least, just rebuild the 5.7. 2. Time: Again, if you want it quick, rebuilding the 5.7 is the fastest. 3. If you want power and or just better overall fun, LS all the way. 4. Added costs: With an LS I would 100% rebuild your transmission to handle the extra power (even a stock LS). My rebuild was $2,200 to handle 400ish HP. 5. I would probably not run dual 3" exhaust (if its a daily) I'd do dual 2 1/2" into a 3-4" single out Magnaflow. 6. If you go LS, get a drive by cable! It would have been soooo much easier for me to hook up my cruise control and AC with a Drive by cable as the computer is what you want as well (for the AC hookups). 7. If you put a cam in the LS, factor in a base tune so it will run and a final tune ($200-300 for the base and $600 was my final dyno tune). The base tune could get you by, but I'm picky 🙂 8. With the LS you will need Patients and time. So if it is not a daily, that is better. If you need the rig fast, go 5.7. 9. Gas mileage: a stock LS (no cam) will get better then your 5.7. If you cam it, it will get about the same, maybe a touch less. If you don't care about milage, you might consider a 6.0 and no cam. Or, if you do a 6.0 and cam it, it would be a crazy fun time :-) A BT Truck Norris cam in a 6.0 with intake and headers is a solid recipe for good fun 🙂(probably what I might do if I did things over). 10. There will be a LOT of small parts and costs with the swap. You will likely have $8k including a tranny rebuild and LS purchase into it. Maybe you can save, but I got all good stuff and spared no expense. As well as a stupid expensive exhaust. Hope that helps a little! It is way more fun to drive with the LS but you will need patients to work through all the small gremlins. That is the hardest part no one says.

    • @cartierrowlette2608
      @cartierrowlette2608 3 месяца назад

      @@MCMROSE Ty for the above advice. Now I have a few things to think about.

  • @rondellsingleton5146
    @rondellsingleton5146 3 месяца назад

    I just put mines on home screen and it works fine

  • @gerry_n1312
    @gerry_n1312 3 месяца назад

    How many yards or in of fabric did you order? you helped me with the thickness awhile back, it'll be a big help

    • @MCMROSE
      @MCMROSE 3 месяца назад

      I think I got 4 yards so I would have extra to do the visors as well. Always better to have more then not enough :-) I think 3 yards makes it, but I lean on the safe side.

    • @gerry_n1312
      @gerry_n1312 3 месяца назад

      @@MCMROSE thank you, can’t wait to replace mine!

  • @GowdyStuff
    @GowdyStuff 3 месяца назад

    Thank you so much for your content, instructions and links to the part. I ordered the replacement digitizer from eBay per your instructions (for a whopping $31 😄), and looked up other youtubers for the disassembly and replacement, and it now works flawlessly!

    • @MCMROSE
      @MCMROSE 3 месяца назад

      Awesome!! Glad I could help out a little!

  • @WesHollar
    @WesHollar 3 месяца назад

    Did you try it with the rear shackles before you put the double caradan drive shaft?

    • @MCMROSE
      @MCMROSE 3 месяца назад

      Yes, It only helped a little. What eventually solved everything was doing the SYE Kit on the transfer case with the double caradan and a slip shaft. that cured everything!

  • @WesHollar
    @WesHollar 3 месяца назад

    Did you try it with the rear shackles before you put the double caradan drive shaft?

  • @mikhael4505
    @mikhael4505 3 месяца назад

    I drive a 300k+ miles 2017 Chevy suburban for work and the audio system did the very same thing. Now it only turns on for a minute or two on start ups then goes off completely. 🤷🏾‍♂️

    • @MCMROSE
      @MCMROSE 3 месяца назад

      Well, let me know if this cures it :-)

  • @shrabanisarkar9529
    @shrabanisarkar9529 3 месяца назад

    Nice video

  • @MahfuzTAJ
    @MahfuzTAJ 3 месяца назад

    Very nice video 👍👍👍

  • @TithiRoy-oh1iy
    @TithiRoy-oh1iy 3 месяца назад

    Prize Kingdoms game review is interesting. Your explanations are top notch. Thank you for sharing the video to the viewers .

  • @MohuaSamanta
    @MohuaSamanta 3 месяца назад

    Very interesting video... thanks...

  • @NasrinSardar-c6z
    @NasrinSardar-c6z 3 месяца назад

    Amazing video.. Really impressed this video. This game is so amazing.. Thank you for sharing this video..

  • @SoumitadasMannaDas
    @SoumitadasMannaDas 3 месяца назад

    This game is amazing. Thank you so much for sharing this amazing review. I definitely try this. It's really help me

  • @sangitamajumder2780
    @sangitamajumder2780 3 месяца назад

    Great video everything is explanation very clear thank you for sharing

  • @RumaMondal-fs1os
    @RumaMondal-fs1os 3 месяца назад

    Amazing and very informative video. Very detailed and well explained video. Your content is very nice. Every body understand is very quickly. Thank you for sharing in this video.

  • @VedhaReddy-r7q
    @VedhaReddy-r7q 3 месяца назад

    This is an amazing video regarding prize kingdom and the way you give the review regarding this game is superb. Thanks for sharing the details information.

  • @joyshane7658
    @joyshane7658 3 месяца назад

    Very nice and detailed review and thank you for sharing us this .

  • @shireenislam7666
    @shireenislam7666 3 месяца назад

    I love to play games but it would be great if I can earn from what I love to do.thanks for sharing this video.

  • @rimidey4500
    @rimidey4500 3 месяца назад

    Prize Kingdoms Game is an amazing video.Thank you for sharing this video with us.keep it up.

  • @TulikaChatterjee-vg1jf
    @TulikaChatterjee-vg1jf 3 месяца назад

    This is amazing! I’m really impressed by how much you've earned with Prize Kingdoms. Your success is truly inspiring, and your review has made me eager to give it a try. Thanks for sharing your experience and being so open about the process. I'm excited to sign up and see where it leads!

  • @Lusi-g6b
    @Lusi-g6b 3 месяца назад

    Very useful information

  • @TitaiDas-fl1jm
    @TitaiDas-fl1jm 3 месяца назад

    Nice video thanks for sharing

  • @SunandaMitra-w6s
    @SunandaMitra-w6s 3 месяца назад

    Very nice video. Everything is clearly explained. Thank you for sharing this with us.

  • @KeyaSeth-u4o
    @KeyaSeth-u4o 3 месяца назад

    Interested game thank you for sharing

  • @swarnalidey4832
    @swarnalidey4832 3 месяца назад

    Nice video