Видео

Sorry just saw your comment. I assume you're talking about the wire that makes it so you can't watch videos while moving? I don't think my android radio had that but there's always a easy way to bypass it. I did a rear and front camera and you run the camera wire trigger wire to the reverse light. Hope I made sense🤷🏼‍♂️🤣

Sorry it was a video I posted years ago. It went 9.40 something spun the tire on the wheel so instead of buying beadlocks he parked it in the garage and bought a boat🤷🏼‍♂️

HAHA that's awesome 👍

Thank you 😁

Haha it's keeping the spot warm for the civic 😂

Sorry that's a buddies car I can't remember what cam was in it. I'm thinking it was a btr blower cam.

Thanks buddy! Now I just need to get some AC, fix my new leaking water pump and put some tint and maybe I'll drive this junk😂

Yeah it's installed just having issues with the AC system.

Can you tell from the video what size that is? The numbers are so faded and I never looked at what size it was. Would that require any kind of retuning?

@Joeshomegarage probably 75mm. As long as the Maf is calibrated for your injectors. Recirculation valve ties into intake pipe (blower discharge pipe) those Paxton and Powerdyne 6lb kits didn't come with Recirculation valve but if you're not blowing couplers off when you let out of gas

You might be ok wth out a recirculation valve.

@@jplperformance9073 yeah it didn't have one so I'm sure it'll be okay. The power pipe is supposed to add boost but I've been down that road with boosted LS engines changing intakes with no changes. I just don't like having the filter pulling air from the engine bay. It looks like I need to figure out what size injectors I have before changing the maf.

@@Joeshomegarage yeah I'm sure you'll be ok. Definitely think about a bigger maf

Where should it recirc back too?

Thanks buddy 😊

Yeah me either but we're too cheap to spend $600 on a remote unless it actually starts the car too! I refuse to spend $500 for my BMW key so I risk only having one😆

Thanks man! Yeah obviously there's some issues but I think it's worth the investment. Especially with no trunk keyhole😂

Thank you 😁

Thanks man! Yeah I'm so close just had to back off a little and do adult shit 😂

Thanks man! Yeah I fought with those tailpipes for hours just to have to tear everything up front apart. I guess some day I'll pull the fenders and try to get the doors adjusted better. I like the stance for now 😊

Just saw your comment. Thanks man! Yeah I had to reconfigure the exhaust because it was too low and it's been raining here for days. Finally dropped her on the ground for the first test drive. Fucking car won't start. Cranks and cranks. Now I'm ripping out distributors, ignition boxes. I just wanted one cruise around the block😡🤦‍♂️

Thanks bro👍

Thanks man. Yeah I go back and forth on the spoiler but I've drilled the holes already no going back now! Plus I ended up with a free hatchback spoiler 🤷🏼‍♂️ the quick jacks are worth every penny I've used them every week for 5 years.

I have both spoilers 1 for a coupe/convertible and 1 for the hatch. If it overhung the trunk you wouldn't be able to bolt it down. Go watch the cervini video 🤷🏼‍♂️ it's the same spoiler.

ruclips.net/video/FzJxGElW79E/видео.htmlsi=BIq1s4uqu4Gu8D1c

Do yourself a favor and buy a Cervini spoiler, you’ll see the difference, don’t take my word for it, I’m just letting you know because I did the same thing you did and went the cheap eBay route

@@pvnugget Thanks for the input man! I don't really like spoilers so I'm not spending that kind of money on a Cervini one this trunk lid has had so many holes punched in it I figured I'd throw a spoiler on it and if I don't like it I'll buy another trunk lid or use the one off my parts car. I will buy a Cervini hood.

I would drive it 2 or 3 times a year with no AC 🤣

It's getting there! The old lady doesn't take great videos🤣

Yeah not for me! If it doesn't have heat or AC I'm not interested. I'm used to heated and cooled seats 🤣

Thanks buddy, yeah there's no way I'm paying $400 for something I'm not even sure I'm going to keep🤣 I guess now I need to buy a hatchback 😆

Thanks buddy, yeah I thought they looked good enough to leave in. I've done it before on a S10 blazer after none of the tools worked I drilled all around and then lit the rubber on fire and knocked them out. Of course doing the control arms and springs I discovered the shocks were all bad! I'm just throwing $100 bills down a bottomless pit🤣

How would that change the angle of the door? I think I got them good enough but since the doors were replaced they weren't lined up correctly to begin with.

Thanks Gary! I am honored you watched one of my videos 😁👍

@@Joeshomegarageawe shoot buddy, I’m honoured you would mention me in your title/description 🙏🙏🙏!!! Keep up the good work my friend. It’s a grind but the community appreciates the hard work content to keep these old girls alive and looking good!!

@@KASLCustoms I'm stuck behind a desk all day but the days go bye a lot faster listening to the pods and watching everyone's videos at lunch. Buying a Mustang was the old lady's idea and she created one hell of an addiction!!!!! I'm up to June 2023 House of Dula pod😁

@@Joeshomegaragethat’s awesome buddy! Glad to hear you’re enjoying them 👊🍻

You talking about the headlights? I'm not sure yet I'm swapping them because everyone says you can't see anything even with LEDs. I may make a wall fixture with the extra front end parts.

Nice I didn't realize they came with power seats but this is my 1st Foxbody so my knowledge of them is lacking! LOL Definitely make a video

Thanks man! Yeah I like the lowered look but I can't stand rubbing and bottoming out my cars so we'll see what happens 🤣 yeah I have the headlights in the car and then there were a few extra parts in the trunk once I get everything lined out I'll let you know. If you're on Facebook send me a friend request it's Joe VerCammen. Should only be one of me in Maryland 😆

Thanks man! I think I am going to go with the pypes bombs catback. I like the round mufflers that take up less space. I would like to just do flowmasters with turn downs but the saleen rear bumper looks stupid without tips.

That's what I figured our plan with the car is weekend cruising, car shows and just banging gears again. Taking a break from chasing hp and 1/4 mile times. For the price point if they last a couple years I'm not losing except for the pain in the ass of installation 🤣

🤣 I just ordered the same headlights. Mine has the tinted ones and even with LEDs you can't see shit🙄 I don't want to be caught out at night with these 50 year old eyes🤓

@@Joeshomegarage right on.. Yes i like the ultra clears. I cant wait to see them installed. They look nice and clean. I got my order in 4 days. Lmr dont mess around. I just ordered a set of indy firehawk tires as well. 255 40 17 backs and 235 40 17s fronts. They should be in by teusday.

@@Thelonewolfchannel1978 I prefer the tinted ones but I really want to see where I am going at night! LOL I'm curious to see how your tires look I've been putting it off because it's so hard to look at brand new tire tread but unsafe to drive on! LOL I would love to use them in a burnout contest!

Rear cog pulleys on a TVS2300 is music to my ears😁

Way better than a hellcat

Thank you!

It made 10 to 12 lbs depending on the weather. 630 rwhp! Should have never sold it😥

Thank you!!!!!!!!!!!

I regret selling that car. The paxton on my mustang doesn't do that 🙄

Yeah I've spent a few days messing with the hinges. I managed to get them good enough for now but going to try and find someone to help me get everything lined up before I repaint the car. It's a good thing the paint is trashed already because I've added a few more chips trying to line up these doors! LOL