Видео

I also went to CR 308B (the location in your vid) during that time when Sandy Creek was flooding however it was way too scary and risky for me to cross. And like you've mentioned the other side is private most likely. The people living on the other side wouldn't have been able to come out during that time when Sandy Creek was flooded like that.

ruclips.net/user/shortsJ34OcTevyE4?si=ZFXDgMX_KrhjqlTT

I found out how to program this but start this on atleast 3 blocks of straight road to ride without stopping: Put the bike first in neutral- once you have it plugged into the ecu turn on the over- Hit the kill switch of your bike to on- The indicator should say L- Start your bike and from a stop shift into 1st- Let go of the clutch and ride in 1st gear while its flashing the number 1- It will then flash into a small letter N- When it does that IMMEDIATELY SHIFT into 2ND GEAR- ride in 2nd gear until its done flashing and turns from a number 2 to a small letter N- Then shift into 3rd and ride in 3rd gear until its done flashing and turns to a small letter N- Keep doing this all the way through until 6th gear these same steps and once you get to 6th gear ride out the gear till its a solid 6 and its not flashin a number 6. Then it will be program and done :) if you mess up while trying to do this and you get stuck at a stop sign or red light. Pull over and turn off the bike. Turn the key over and hit the kill switch on and then off about 6-7 times until it starts with the letter L. Then you can try to program the gears again. The programming must be done without stopping from 1st-6th gear :)

Hello, would you be kind enough to tell me how long does it take to adjust the valves on this CB500? Thank you so much

What windscreen mount are you using and what accessories bar is that?

Wir haben letzten Sommer diese Tour mit einem Jeep und Guide gemacht und fuhren exakt diese Route. Das Wetter war viel schlechter, als auf dem diesem Film. Trotzdem war es eines der schönsten Erlebnisse. Ich habe mich gefreut, diese noch einmal nachvollziehen zu können, aber war von dem Film enttäuscht. Warum? Eigentlich habe ich hier nur Straße gesehen. Es war ein Fahren auf der Straße und nicht das Erleben der Landschaft. Was war bei uns anders? Auf der Hinfahrt haben wir einen Polarfuchs gesehen. Tatsächlich erlebt man so einiges neben der Straße, wenn man nur genau hinschaut. Es gab einige kleine Stopps um den Fjord zu genießen, und wir hatte das erste Highlight bei Hrafnseyri mit seinen schönen Grassodenhäusern, einem kleinen Gehöft und einer Kapelle mit fantastischem Blick über den Fjord. Bei der Fahrt über das Gebirge nach Þingeyri machten wir ein paar mal kurz Halt um die Stimmung in diesen Tälern aufzunehmen und das letzte unbezahlbare Highlight der Tour war die Fahrt auf den Berg Sandar bei Þingeyri mit einem fantastischen 360° Panorama über die Fjordlandschaft der Westfjords. Wir sind dann ziemlich beeindruckt zu unserem Ausgangspunkt nach Ísafjörður zurückgekehrt nicht nur wegen dieser Fahrt, sondern auch unserem Aufenthalt an den unvergleichlichen Fällen von Dynjandi. Wer dort wirklich was erleben will, lässt sich Zeit oder nimmt sich einen einheimischen Guide. Am Besten beides.

Love from India ...how wonderful this place look 😮😊

What is the shims diameter ?

I've done a couple valve checks now and haven't replaced the gasket yet due to it being in excellent condition. No leaks yet. Didn't add any sealant either.

What windshield did you install on your WR250R ?

This was great! I am newbie geek and have a few trips done. Doing the NMBDR here in a few months! Dang…day 3 would be great! I appreciate what you put out there, super helpful. Baller!

2022 model rpm indicator; OMG so small. just sold my color TFT on bmw. what a difference. Can't see it in sunlight. So thought how do i see rpm to change gear; well every 10km as its set 10-,20,30,40km is each gear; nev er had anything go thru gears this quick. Thought my F800R was quick; a HD would be first at 40 mph and I'm in 4th gear. WHY; spend my life shifting up to go around the corner; 3rd gear creeping ! Really. So disappointed. even tr07,9 was way longer in first, 2nd. other than that; comfy and nice bike for the bucks. Scooters leaving me in their dust !!

Great job, enjoyed them, do you live in Carlsbad? Is that why you went through Queen?

Hi Joshua, great videos, this and Big Bend. I live in Midland Texas and have a Wr250r and a CRF450rl If you ever want a riding partner for New Mexico or West Texas let me know. I've wanted to do the New Mexico BDR but I think it would be a lot better/safer with another rider along

Love my beautiful state. Thank you for showing people the beauty we have here.

Thank you for highlighting the beauty of my beloved state.

I’ve got the same bike and planning to install fog light, alarm, tracker. Pretty much zero knowledgeable unfortunately 😅 What would be the best option for me? Once I have access to the option connector it would be pretty easy?

I'm shocked at having to replace a chain at such low mileage. My previous bike a Honda varadero 1000 the chain lasted 42,000 miles & infact the chain was still in the green at the adjusters but the sprockets were well worn . My cb500xh had a replacement chain fitted 2,000 miles before I bought the bike & I'm hoping that it lasts alot longer than yours. Thanks, Ian.

Hey Joshua, did you ever get around to editing Day 3 :) ?

Thank you for this video. This worked really well for me and got my GPS and wireless phone charger wired.

After how many kms and how many years you have adjusted this valve bro?

Looking to do the nmbdr on a wr250r also in September 2022. Any tips, or things I should check out? Thanks!

How much was the kit?I called and he did not give that option..he wanted me to send him my shock for 700 bucks

We drove this last week. It was much better than I expected! Texas is beautiful.

Thanks for the video, do you have a video of removing all the crap to get to the engine? I’ve got the book but really looking for a video of someone else doing it. Sadly even though these bikes are super popular there’s not much about, probably because Honda designed it to be difficult so you get a dealer service

Thanks for video. How much does a dealer charge to get this done? I'm contemplating price and time, is it worth it?

On other hand, on nc750 its way easier to inspect and adjusting the valves, almost need only remove radiator and remove valve head cover to inspect

iv a cbr 500.r. and im thinking ill do valves at 30,thou ish

Not the most knowledgeable electricianal man, but would it be easier for me to just run a relay and connect multiple accessories to that oppose to this method? What's the difference?!

And thank you for posting the video I really enjoyed it

Hey Joshua was watching your Carlsbad to Ruidoso ride from last year I’m about to pick up my KTM 390 adventure and ride the same route any suggestions first time on the BDR for me

Hello Joshua. Your videos on the NM BDR are fantastic! I am planning on a first time ride on my new Yamaha Tenere T7 at the end of September. Originally had another rider that was going to join me but plans changed on his end so I may be doing this solo. I have been mainly doing long desert adventures on my Honda 450X so this will be a change for me on my Adventure Bike. Could you reach out to me on Facebook Messenger so we could talk one on one about a few particulars? I live in Albuquerque, NM. Please message me ASAP. Thanks, Cecil Davis

"Review" - video is under a minute long - yea ok bud

Would love a video on how to set them right.

Where do you find these "Corsa electrical adapters/pins"? Thanks.

Sandy Creek on CR 310 was flooding!! I didn't dare to cross the Sandy Creek section on CR 315. It wasn't deep but the sand was VERY soft when I pre-walked the trail crossing. Slight chance that I could had been stuck. ruclips.net/video/39ks4BUCDpk/видео.html

Sanchomapento at Ebay has ready to connect Plug&Play set USB charger QC3.0 with voltmeter, and cable harness with original plug

what fuse block is this? Link?

Thanks for making these videos!

Wonderful roads environment of (in) Iceland! - Wonderful Iceland!

When checking @ 100,000 kms or 64k miles my 2016 X has only been out once. 2 exhaust valves were a little tight @ 0.22mm (0.24 - 0.30mm). That's not bad going !!!!

So if it's out of spec, how are you supposed to correct it?

What happened to #3? I enjoyed 1 & 2. Good job!

Did you use nitrogen in the rear shock when you rebuilt it? If so, where did you get it done?!

great video, do you think the trails could be done in a stock 4x4 truck? im planning on going from T or C to ruidoso

What map did you use for your PC? Did you do the flap mod and air filter as well?

Hi Joshua, great video, could I ask, can you power heated grips off the front connector or do I need to go to the battery? Cheers J

Not sure if someone else has mentioned yet, but to get the cluster connecter off, you need to move the lead over a hump in the frame where a grommet holds the cluster. Hard to describe but once you do that, you get access to a bit more length of cable and you can pull the cluster forward enough to disconnect it.

Hi Joshua! What crash bars are you using?

This is the kind of niche content I love this website for. It's so interesting to see other places in the world that aren't the usual places that people go. Thanks for posting your travels!