Видео

It depends a lot on what you are trying to do with it, whether you want to view on a PC or online, and what your budget is. Is this for othos or 3D models?

Glad you enjoyed it. Hope you're doing well.

Glad it was helpful!!

I don't know what that means. Did you mean to tag someone?

Glad you found it helpful! Thanks for the comment

It's quite a wide angle lens, so my assumption is you are too close to the building. Try moving back a bit. That will also help with gps accuracy.

Does the emlid work outside the US? We operate in South America and are looking for a good Base and Rover to use with the M3E.

@@dragonflyguyana here is a link that will show dealers around the world. emlid.com/dealers/. There is no reason why it would not work in South America, however I would suggest contacting Emlid directly in case there are any differences in software such as licensing restrictions or language differences.

Glad you think so!

Here's a link to where I bought my RTK unit from. www.ebay.com/itm/334877561253?mkevt=1&mkpid=0&emsid=e11051.m43.l1123&mkcid=26&ch=osgood&euid=a3524e70b83c47f49d442b15741235ff&bu=43169403264&osub=-1%7E1&crd=20240424045302&segname=11051 No affiliation with the company. I honestly thought it might be a scam because it was so much cheaper. But it was covered by ebay's money back guarantee so I thought it was worth a shot and it really is the real deal. I've given that to several other people that bought it and they were all happy with it. It takes a little bit longer to arrive as it is coming from China, but mine showed up in about a week. Best of luck!

Barry was busy to explain M3E and Dji App.

I'm glad you liked it. Sorry for the long gap for a Dronelink video. I've been focused elsewhere and only have time to put out one video a week. And sometimes even that's hard.

True!!

@@aviosmedia, Barry you can only do so much, and the day job has to take priority, as that's what pays the bills 👍

@@thekiteflyer1 Travel is the biggest problem. I spend a lot of time on the road.

Glad you liked it

I wish I had seen it before! When I was looking I couldn't find anything. And glad I'm not the only one that thought it might be useful :)

Sorry, I don't have any Phantoms these days. I'd suggest reaching out to support at Airdata. They are pretty good at getting back to you.

Correct. If you can establish a solid RTK connection then your drone flight will be more accurate, and the metadata collected will also be accurate. However, if there were a failure (e.g. loss of RTK) during flight, which can happen especially in areas with poor coverage, or you just wanted to add an extra layer of protection, then you can post process the data using the method show in this video ruclips.net/video/cESXvYiQ5ps/видео.html Finally, I would always recommend having GCPs and checkpoints. You can then process using those for another level of security - especially checkpoints which help ensure that everything is where it needs to be.

@@aviosmedia Thank you for taking the time to answer my question. Good luck with the channel, I just subscribed!

@@henkthoma2422 Happy to help!

I have asked a friend who does a lot of work in that region. But, in the meantime, maybe look into one of the paid services like this? pointonenav.com/states/new-hampshire/

You're welcome!!

Thank you!!

Did u ever figure out why kml cannot be loaded from google earth to pilot 2? Remember I was using Microsoft and not apple

@@joezurek7804 Turns out you can export from google earth and into Pilot 2. All of the examples people had that failed did no originate in Google Earth, they started in other programs such as QGiS. I tried many variations and all of the examples people were able to give me stared somewhere else, were imported into Google Earth and then exported. If you create in Google Earth and export as a KML or KMZ then Pilot 2 loads it no problem. For the cases where you started somewhere else, I put a follow up video out showing how to do that in Flight Hub 2.

They don't make it easy! I use a program called Android File Transfer which (if I recall) is made by google. But they keep hiding it so I can't find the link to where to download it now. There are other app out there but this one was free and works well, except on my phone where it's a bit hit or miss and I need to retry multiple times.

Glad you liked it :)

You're welcome!

Here's a link to where I bought my RTK unit from. www.ebay.com/itm/334877561253?mkevt=1&mkpid=0&emsid=e11051.m43.l1123&mkcid=26&ch=osgood&euid=a3524e70b83c47f49d442b15741235ff&bu=43169403264&osub=-1%7E1&crd=20240424045302&segname=11051 No affiliation with the company. I honestly thought it might be a scam because it was so much cheaper. But it was covered by ebay's money back guarantee so I thought it was worth a shot and it really is the real deal. I've given that to several other people that bought it and they were all happy with it. It takes a little bit longer to arrive as it is coming from China, but mine showed up in about a week. Best of luck!

Glad it was helpful!

Yes, I connect my controller to a hotspot - often my phone. A save error usually means there is a problem with the data you entered so it can't connect. I've had it where the data was all correct and it still didn't work and they couldn't explain why. That was not RTK2GO, but a different provider. But I was able to use a different connection point and that one worked, so maybe try a different connection point even if it is further away. It might not give you what you need in terms of accuracy, but it could help determine if things are working. I wish I could help more but sometimes the connection points just don't want to play nice.

Well, after many failed attempts again today I ordered all the parts to build my own base station. Then tonight I tried again and it connected, and shortly thereafter I found that Florida has its own network free for public use and I was able to make 3 separate connections after registering. Like you said, some days things just don’t play nice. 👍

@@TheMalerdaemon Awesome! I'm glad you got it sorted. Building your own base station sounds interesting. NY has a good CORS network. But if I try to connect to a specific base station it never works and they can't tell me why. Fortunately they have an option where it connects to the nearest one and that always seems to work so...🤷

Unfortunately, as with most technology tutorials, they become out of date. I am no longer using this method to share with clients, so I would have to spend time looking into that. They do update the instructions so, in theory, just following the instructions provided will get you what you need. But...what is it that you are trying to do because often there are faster, better, easier, and cheaper ways to get to the result you need. Maybe we can get you to the same result without having to go down that path.

@@aviosmedia thanks for your reply we have found a way out to address the issue. The portal that is opening is showing not secure any idea how we can fix that ?

@@topoindia4172 To do that you are going to need a URL with a security certificate. You will probably also need a static IP address to point the URL to. Those are outside the scope of this tutorial, but a quick google search should give you what you need and the hosting provider that you buy the URL from can assist with the certificate.

@@aviosmedia Hey thank you I have managed to install the SSL certificate and everything is up and running. just a question why is it taking extremely long to import the dataset ?

Thanks! I know a lot of people like to hide information. I prefer to give back. Ironically, I receive more work this way as people bring me in to help out - especially when they have something tricky or new. I've worked on some awesome projects that really push the boundaries of what is achievable, and figuring out those problems is what gets me excited!

Hi. Yes, you can create these directly in the RC. That was not the case when I first tried this but, after an update, it is now available. Just start creating a route as you normally would and it will show up as one of the options. You do not need an RTK module to tun these. You don't need the D-RTK...at all...ever. It's a nice tool that works seamlessly but, IMHO, there are better options such as the Emlid Reach RS2+ or RS3 which do the same job, for less money, without locking you in to DJI equipment. Another option is to use a CORS network which avoids the need for a base station in many cases. See how to do that here ruclips.net/video/cESXvYiQ5ps/видео.html

@@aviosmedia Thanks for sharing your valuable knowledge.

@@arulr3021 My pleasure

Thanks! 😀

Thanks. Someone else said the option only appears if you have the RTK module attached. I need to look into that. Would be nice if they have made the change to allow for both. Glad you are enjoying the channel!

It seems that came out after I created those missions but it certainly appears now. I did say "as at the time of creating" 🙂 Interestingly they have now also added the linear route, which was previously not available, so both of those now work. Thanks for the clarification!

Everything shown in this video was created using a free account. There are some features that are paid but you don't need a paid account to do this.

Very interesting! I have an RTK module but I only install it when I need it. I'll take a look and update the comments here once I've checked it out - thanks for the input. It's amazing how much I learn when I put these videos out.

You are correct. It seems that came out after I created those missions but it certainly appears now and I didn't need to put the RTK module one. I'll have to see if there is a way to edit it - I might be able to cut it out. One nice thing about Vimeo over RUclips is you can replace videos, but YT doesn't allow that. Thanks for the correction!

@@aviosmedia thanks for confirming!

Thanks for helping out. We all learn and get better when we share

@@aviosmedia Agreed! Please keep your video's coming!

Happy to help!

Hi. I wish I could help but I don't use DJI Terra at all.

You're welcome!

You're welcome!!

It's saved the day for me! If you're mapping regularly, there will be need in the future!

Great question. I've not found a way for it not to slow down between components. If you need an orbit and then a waypoint as shown in the video, problem is that the flight direction between the two components almost always abruptly changes requiring a complete stop from a physics standpoint. A couple of options are: a. Edit the video with a nice transition - sometimes it doesn't have to be a continuous video. In fact it's pretty rare that it does need to be. b. Create a waypoint compnent that has additional points to create a circle before the final leg. That way you don't run into the slowing down between components and you can even build a nice curve into the final leg movement to smooth out some of those problems caused by that pesky physics thing. Hope that helps!

@@aviosmedia yeah tanks the option c what I was thinking also about. But if you change altitude you need serious calculations :)

It's possible! The software changes all the time and the last time I used terrain follow I used the downloaded DSM. The little graph only shows in the camera view, so make sure you are in that view and that it is the real time terrain follow (using the camera) as that is the only mode it works in. Also, the bottom right might be showing the obstacle avoidance view, so try switching that window. Next time I have an opportunity I'll check it out.

Thanks. I actually posted a follow up video covering that as another person had also discovered that method. You can see the updated video here. ruclips.net/video/bub415b2M9E/видео.html. The note about FH becoming slow if you have a lot of polygons is a good one - I have noticed the same thing. Always learning!!

I can't say for sure but my assumption is yes. As long as you can download the data for a period of time you should be able to use that to correct the image location data

It can save a lot of time on site for sure!

@PerElofsonMora That's fantastic! Thank you! I tried it out and it works exactly as you described and, yes, that is a much easier way to do this. One of the reasons I create training videos is because I always learn in the process. Often it is through trial and error as I put the videos together but sometimes, like this one, someone will weigh in and teach me something amazing. Soo...I'll leave this video up (at least for the time being) but will probably end up replacing it soon as this is a much better way. Thanks for weighing in!

@@aviosmedia I'm happy to help. I had the same issue importing when I got a job with 13 areas that the customer had made in Google Earth. I tried the import in the "Flight route" tab but never understood how to get it working. Then I fiddled around and checked FH's all tabs and found another import and voila, the import was done. :)

@@PerElofsonMora I had a similar issue. 10 different solar sites, each needing 3 different flights and, in some cases, multiple areas per site. I knew I could do it on the controller and then export them to FH so that's what I did. It worked great, but this is a better solution so keep an eye out for another video covering that!

@perelofsonmora Can you drop me an email to barry@aviosaerialmedia.com? I'd like to share the next video (which you inspired) - but I'm not convinced I pronounced your name correctly so I wanted to send it to you before I publish :)

Sorry - I think I need a bit more information. Are you asking when it is legal to use it (which will vary by location) for mapping and cartography? Or are you asking about areas where the maps you generate can be used/sold to clients?

@@aviosmedia Thanks, I mean this solution is for construction?

@@mundocoban It can be, but it really depends what you need to achieve. A drone is just a tool so it can be used for a lot of things. Do you have a construction client that needs something, or you want to sell them your services?

@@aviosmedia the second is the answer, I am geologist and usually I use photogrametry. How do you record this work an then you can show by you tube?

I don't deliver to clients using RUclips - that's just for training videos. I have portals that can host geotiff photos (orthos/maps), 360 photos, standard images and video. These are put into a portal - usually with regular captures so that the clients can compare progress on site. The portal I use depends on the client needs. So if you can tell me what products you expect to deliver I can offer some suggestions on software that can do that.

I assume you have logged in with your user id and password. Assuming that step wasn't missed, you do need to start the app each time you want the sync to happen - it won't happen if the app is not running. Once you start the app and wait a bit you should see a quick message pop up at the bottom telling you how many were synced. If that still isn't working then I'd suggest contacting Airdata support - they are generally pretty helpful.

@@aviosmedia thanks

Hi John. If you have watched the introduction and set up your organization and project, then I'm not sure where you are having trouble, so it would be difficult to create a video to help you. I do offer 1:1 consulting for just $75 per hour (for individuals and small bushiness). And I provide a guarantee - if you don't think you received value for money then you don't pay. So far, I've never had anyone be disappointed. If that's of interest send me an email to barry@aviosaerialmedia.com and we can set up some time and get you sorted out.

Thank for quick response. I have now managed to backup the missions from the RC Controller to FlightHub 2. What I had missed is that on the Controller when logging in, you need to enter the Project Number and not the Project Name. It is all somewhat academic as FlightHub 2 does not support the M3M although it seems you can backup the M3M missions to FlightHub 2 but if you try to edit them you could risk losing some of the settings specific to the M3M. If you do download a mission that has not edited on FlightHub 2 then it looks to be intact so FlightHub 2 could be a useful backup storage, but that is about all as far as the M3M is concerned.

@@johnlord7188 Good to hear. I have heard that you can use the M3M by selecting the M3E. I can't say I have tried it myself but it's worth a shot - try a small test mission and see how it goes.

Glad it was helpful! You are not the first one to struggle with that as it's a bit buried. It's actually set at the organization level. Click on your name and select My Organization. Then click on Organization settings (the little cog) and then click Edit next to the organization name.

@@aviosmedia thank you.

That is very true! Thanks!

Which version of the RC firmware are you on?

@@aviosmedia whatever the very latest is. I thought it was the original Kml problem where it only accepted kmls from Google earth so I made sure everything was up to date

@@ChrisDaviesDrone Thanks. I'm currently traveling so I won't be able to check it for a few more days. I find it hard to believe that DJI would remove a feature that so many people rely on. But...they have done strange things in the past. One of my videos never even made it to publication because they pulled a feature just after I made it. I've asked a few other people to see if they are having problems with the KML import. Once I have had a chance to try it out I'll reply here. Thanks for weighing in.

Ive had quite a few people try on thr latest version. The ones that had problems it turned out to be how the KML was created. Can you try importing this file onto your M3E controller and let me know how it goes? www.dropbox.com/scl/fi/yg0uk92dc7b8491f4d43v/Test.kml?rlkey=qgtluxvjrnp2sdyaarrqq3qhm&st=t502i5ku&dl=0

@@aviosmedia Downloaded. FYI my KMLs started life in Mapinfo as Tab files, then translated to Shapefiles. Imported into Google Earth Pro then Save Place As (Exported) as a KML or KMZ. Neither worked. Interesting, I had some old KMLs from previous jobs still on the RC. I tried to make a new route with these, failed. Even though they had previously worked

Which drone?

@@aviosmedia M3E

I just did this a week ago. I can't believe DJI would remove that feature so I suspect the KML is not right. Can you email it to me at barry@aviosaerialmedia.com and I'll look at it when I get some time.

@@aviosmedia I said the same thing when the files failed to upload. Before the 07/17/24 firmware update, I had no issues. Thanks for the offer to take a look at the files but they’re LEO related and can’t share the missions.

@@twocattledogs1076 Understood. I'm traveling right now. I have not done a firmware update since I created this video so it will be interesting to see if there is a firmware update waiting when I get back and if it breaks that feature. I really would be surprised because that is used industry wide and I think there will be an outcry. I'll let you know how it goes! Thanks for the feedback

Thanks Tony!