- Видео 44
- Просмотров 708 619
7丁目製作所 / 7chome_seisakusyo
Япония
Добавлен 2 дек 2020
Thank you for coming to my channel !
I have worked as a mechanical design engineer for many years and have made many things as a hobby.
At first I made them for my own enjoyment, then I made them for my children, then my neighbors asked me to make, and finally I'm making them for sale.
I hope you like what I made, even if it's just a little bit.
If you like it, please subscribe to my channel.
I have worked as a mechanical design engineer for many years and have made many things as a hobby.
At first I made them for my own enjoyment, then I made them for my children, then my neighbors asked me to make, and finally I'm making them for sale.
I hope you like what I made, even if it's just a little bit.
If you like it, please subscribe to my channel.
High rigidity Drill press table with Dust collection
I had been using a drill press table with dust collection, but its structure was complicated and rigidity was low.
So I created a new table that was simple, rigid, and has convenient functions.
If you like it, please subscribe to my channel.
他の製作品のご購入はこちら(日本国内のみ)
www.creema.jp/c/7chome_seisak...
#drillpresstable #woodworking #woodworkingtools #dustcollection #diy #howtomake
So I created a new table that was simple, rigid, and has convenient functions.
If you like it, please subscribe to my channel.
他の製作品のご購入はこちら(日本国内のみ)
www.creema.jp/c/7chome_seisak...
#drillpresstable #woodworking #woodworkingtools #dustcollection #diy #howtomake
Просмотров: 2 478
Видео
Wooden 4x4 Mini Reversi
Просмотров 553Год назад
This is a 4x4 Reversi board game made from walnut or white oak wood. Pieces are also made from maple and ebony. If you like it, please subscribe to my channel. 他の製作品のご購入はこちら(日本国内のみ) www.creema.jp/c/7chome_seisakusyo #woodworking #woodentoys #Othello #Reversi #walnut #whiteoak #DIY #Howtomake
Wood lathe with automatic feeder, No jaws or claws
Просмотров 2,3 тыс.Год назад
I am making this phone speaker and want to mass produce round rods as components for this. ruclips.net/video/AfxbajCB6gg/видео.html In my previous video I built and used a simple lathe but it was not productive. It will also be used for cutting reversi's pieces. ruclips.net/video/s6EE1HLCYJc/видео.html So I made a new lathe and I will show you how to make it. Prioritizing productivity, this lat...
Dowels with Flathead screw style
Просмотров 742Год назад
Making cute little dowels that looks like the Flat-Head screws used in old machines or mechanical watches. If you like it, please subscribe to my channel. See my Instagram for more of my work! 7chome_seisakusyo #woodworking#DIY#Howtomake#wooden#dowel
Wooden Reversi Part2: Making Koma
Просмотров 625Год назад
This is a wooden Othello (Reversi) board game made from teak or white oak wood. Koma (Pieces) are also made from maple and ebony. If you like it, please subscribe to my channel. 他の製作品のご購入はこちら(日本国内のみ) www.creema.jp/c/7chome_seisakusyo #woodworking#DIY#Howtomake#wooden#Othello#Reversi#teak#whiteoak
Wooden Reversi Part1: Making the Board
Просмотров 659Год назад
This is a wooden Othello (Reversi) board game made from teak or white oak wood. Koma (Pieces) are also made from maple and ebony. If you like it, please subscribe to my channel. 他の製作品のご購入はこちら(日本国内のみ) www.creema.jp/c/7chome_seisakusyo #woodworking#DIY#Howtomake#wooden#Othello#Reversi#teak#whiteoak
Can Crusher - Useless Cool Design - Trailer
Просмотров 1,7 тыс.Год назад
In order to make aluminum ingots, I need a large number of aluminum cans. Aluminum cans take up a lot of storage space if they are not crushed. I created a device to easily crush a large number of aluminum cans. Useless Cool Design! For more details on how to make it, please refer to the playlist. If you like it, please subscribe to my channel. #DIY #Howtomake #Can #Crusher #cancrusher #Aluminu...
Electric Furnace Upgrade with PID Controller
Просмотров 6 тыс.Год назад
In a previous video, I built an electric furnace. ruclips.net/video/wwgOH2cQkn4/видео.html I installed a PID controller on this so that I can control the temperature. Now it can be used for heat treatment of aluminum ingots. If you like it, please subscribe to my channel. 他の製作品のご購入はこちら(日本国内のみ) www.creema.jp/c/7chome_seisak... #diy #howtomake #can #aluminum #melting #ingot #electric #furnace #PI...
Orbital Sander Holder
Просмотров 2,6 тыс.2 года назад
Sanding small parts with a heavy sander is tiring work. So I fixed the sander upside down on the workbench. If you like it, please subscribe to my channel. See my Instagram for more of my work! 7chome_seisakusyo 他の製作品のご購入はこちら(日本国内のみ) www.creema.jp/c/7chome_seisakusyo #DIY#Howtomake#Sander#Holder
Sofa side table with reinforcement plate
Просмотров 6 тыс.2 года назад
I received an order for a sofa side table in a slightly larger size. To ensure strength, a reinforcement board was added. It can hold books and magazines. If you like it, please subscribe to my channel. See my Instagram for more of my work! 7chome_seisakusyo ご購入はこちら(日本国内のみ) www.creema.jp/c/7chome_seisakusyo #woodworking#DIY#Howtomake#wooden#sofasidetable#sofa#table#walnut
Electric Furnace for Melting Aluminum
Просмотров 47 тыс.2 года назад
Electric Furnace for Melting Aluminum
Acoustic amplifier phone stand with Iron-wood Reflectors
Просмотров 552 тыс.3 года назад
Acoustic amplifier phone stand with Iron-wood Reflectors
Can Crusher Part2: Compressor & Feeding Mechanism
Просмотров 1,2 тыс.3 года назад
Can Crusher Part2: Compressor & Feeding Mechanism
Circular Saw Guide - Easy & Accurate -
Просмотров 4253 года назад
Circular Saw Guide - Easy & Accurate -
Making Parts from Melted Aluminum Can
Просмотров 1,6 тыс.3 года назад
Making Parts from Melted Aluminum Can
Mini Cyclone Dust Collector for CNC1310
Просмотров 12 тыс.3 года назад
Mini Cyclone Dust Collector for CNC1310
Cyclone Dust Collection Part3: Reinforcement to negative pressure
Просмотров 7593 года назад
Cyclone Dust Collection Part3: Reinforcement to negative pressure
Cyclone Dust Collection Part2: Making a Cyclone dust separator from Traffic cone
Просмотров 3,1 тыс.3 года назад
Cyclone Dust Collection Part2: Making a Cyclone dust separator from Traffic cone
Cyclone Dust Collection Part1: Blower modification
Просмотров 6853 года назад
Cyclone Dust Collection Part1: Blower modification
Thank you for sharing today. I am also a craftsman. I like woodwolk,leather,and knives. Your sharing today makes me feel that hobbies are on the same level as work . Thank you,and I will also go further on path of hobbies.
Thank you!
screwgun powered studio. Love it.
Thank you!
Beautiful, inspiring, work!. I'm designing something similar but putting it on a vertically adjustable stand and attempting to horn load the speakers in an attempt to bring up the lower frequencies. First for a phone and if it works a tablet.
Thank you very much!
for 2x600 watt heating wire, how high the temperature of your furnace?
If the insulation is strong enough, it would reach the temperature at which the aluminum would melt in about 3 hours. Insulation is more important than power.
@@7chome_seisakusyo I see, I was interested to build this kind of electric furnace for clay firing into porcelain. But the required temperature is 1200 Celsius.
Wow! To achieve 1200°C, I think it needs a more insulated structure and more power..
This is sick now i want to make one
Thank you!
I want to make it
Good luck!
👍👍
Thank you!
Nice, hardly useless.
Yeah!
well done
Thank you!!
how many watts? bet the meter spins like a fan when you plug that in. $$
HaHa. That is 1500w.
Naysuuu 👍👏
Thank you!
What is a one coin bottle?
These are bottles that can be purchased at "100 yen stores" in Japan.
Maravilloso, el trabajo de la más alta precisión en la elaboración del tratado,e identificación de la materia prima 👌😎. Exselent
Thank you!!
The design is wonderful. I learned a few new materials. Great use of electricity; I was going to run 240v but I think 2x 120v is smarter. Please consider using proper tools and avoid setting crucibles on concrete; it could explode! I like your design the most from what I've seen and will emulate it with a much larger build!
Thank you!
ما الفائده المعدن يمكن ان اصهره في تكلفه اقل من هذا لماذا لا تجرب الذهب او معدن اكثر صلابه
I am very interested in copper melting and it is one of my dreams to try it!
Zašto uopće topiš aluminij?Koja je svrha?
I make mechanical parts from molten aluminum. ruclips.net/video/2fKIVmtYpmM/видео.html Yes, I understand it is cheaper to buy them. Simply because it is fun.
Please la resistance utilisé combien d empere
It is a 100v / 600W resistor, so about 16.67 ohms.
the sound is more linear without your acoustic amplificater, you add resonance in mid, kill the high and don't get more bass but it's louder yes
Good.
Maybe you are right, I am not an acoustic expert, but the most important: it does not sound like a smartphone any more! The sounds are not so nervousness and with some app you can use an equalizer to adjust the things.
Hola, buen trabajo con el horno electrico, por favor permitame darle una recomendación, no use ningun tipo de madera cerca del horno, se maneja alta temperaturas y resulta un peligro, cualquier pequeño escape de aluminio fundido provocaría un incendio. Un Saludo.
Thank you.
Great jig , thanks , will make for finish sander for box inside pieces , foam and lock in system great , jack in Idaho
Thank you!
It is really nice!!!!
Thank you!
good products
Thank you!!
素晴らしいです。
Thank you!!
Nice work!
Thank you!!
Nice job. 👍 How long it takes to melt aluminum
About 30min. Thank you!
The foam was brilliant. Nice build.
Thank you!
Amazing project!
Thank you!
Brilliant. UK
Thank you!
wow desde México, que buena enseñanza de técnicas en un video, nice job
Gracias!
hello,question: if place the aluminum oxide at temperatures reaching 1200 Célsios, l con modify its structure, thus obtaining mono crystalline alpha alumina ?
Sorry, I am not familiar with it.
Nice work! It looks good and was built well. I also like your shop. You've put a lot of thought and effort into it and it shows.
Thank you!!
Greatings from the US.
Thank you!
how did you find the billet density.? I've heard that vacuum assisted casting, even billet will make for a more uniform/dense result. Great build!
Thanks for the comment! I did not measure the density of the billet, but the porosity was less than I expected.
Arigatou gozaimasu, demo kako shimasenka?
Thank you! kako??
@@7chome_seisakusyo copper desu
Yes, I would like to melt copper someday!
Very nice. It's a well-thought-out, clean build and seems to function as intended. Do you have an idea what the inner volume of the oven is? I am wondering if your stones are 4.5 - 9 - 2.5.
Thank you for comment! The internal volume is about 1 liter. The size of the refractory brick is 230 mm x 110 mm x 65 mm.
@@7chome_seisakusyo Thank you, that is helpful to know.
Good design sound same sony qualty .ı hope phone too sony xperia :) hello from turkey
Thank you!!
Impressive.
Thank you!!
Elegant solution, liked and subbed.
Thank you!!
Thank you!!
The wood lathe was more interesting than the project 😁
Thank you!!
Beautiful❤
Thank you!!
Cool
Thank you!!
12:00 heatgun for this step does the job for me.
Thank you!!
Very nice and to the point build. Thought it was soso till you placed blanket around the brick❤. The last blanket could be regular house insalation to save money. Really nice job!!
Thank you!!
3:34 That is indeed a great use for round scrap. Nice idea!
Thank you!!
Is you use distribution strip ?
Yes.
Bro your finger are to close to the router. Holding a quite small piece with your bare hands could resulting in other bloody pieces... wtf
Thanks for the heads up. I'll be careful!
@@7chome_seisakusyo a clamp maybe from wood would be a solution. Anyway, result is great.
Apart from not clocking the screws... Sweet!
It took me a week to figure out what the word "clocking" meant! I also learned that the people who align the screw heads are called "screwcrockers". Actually, this is an agenda I have been very interested in for a long time. Thanks for providing a great agenda! As an Industrial designer, my opinion is "I would like to CLOCKED it if possible". However, as a Mechanical engineer, my opinion is "Should not be CLOCKED". Screws should be tightened to the proper torque, in which case the thread angles cannot be matched. So when I see these neatly "clocked" screws, it looks like they were assembled at the expense of performance. As an example, I don't like the Royal Oak by Audemars Piguet. Well, I don't have the money to buy one... I really enjoy our conversations about this! I'll try to figure out how to clock the screws with the right torque. Someday I hope to join the ranks of screwclockers!
blog.lostartpress.com/2019/04/18/the-church-of-the-clocked-screws/
bbs.homeshopmachinist.net/forum/gunsmithing/62709-clocking-machine-screws It's fun to google various sites.
www.bladeforums.com/threads/timed-screw-and-i-dont-mean-birth-control.840226/ Also called "Timing"?
😂
شكراً لك على هذه الطريقة وعلى المهنة سؤال هل بي الإمكان صنع فرن للفضة أو الذهب قوة شريط الكهرباء كم و فيما إذا كانت الألواح الشمسية تشغله بدون كهرباء ممكن شكراً لكم من دمشق تحياتي لكم ❤❤
Thanks for the comment. The power supply is 1500W. I don't know about other questions, sorry.
Well done! Question: what is your cnc rubber feet setup to reduce vibration? Thanks
Thanks for the comment. I place butyl rubber which is quite soft and thick.