Acoustic amplifier phone stand with Iron-wood Reflectors
HTML-код
- Опубликовано: 29 сен 2024
- This is a smartphone speaker made with a focus on sound quality.
Holes are drilled in the solid walnut wood to create a sound path and amplify the sound emitted from the phone.
If you like it, please subscribe to my channel.
====== Details ======
The sound path gradually increases in diameter from 15mm to 20mm to 25mm, amplifying the sound efficiently.
At the bends of the sound path, reflectors made of Ipe wood, also known as "ironwood", which is very hard, are installed.
High frequencies are directed to the right side of the sound path by the second reflector.
The right side sound path is shorter and amplifies the highs.
The mid-bass sound goes through the gap around the second reflector to the left side sound path.
The left side sound path is longer and amplifies the mid-bass.
The last reflector has a large diameter and directs the sound to the front.
The final reflector is visible from the side and is a key point in the design.
==================
See my Instagram for more of my work!
/ 7chome_seisakusyo
ご購入はこちら(日本国内のみ)
www.creema.jp/...
#woodworking#DIY#Howtomake#wooden#walnut#AcousticAmplifier#PhoneStand#PassiveSpeaker - Хобби
13:46 Perhaps my camera's auto-gain control has been activated during recording.
The change in sound when the phone is removed is consistent with actual hearing.
- - - - - - - - - - -
There are other videos of the lathe in this video.
ruclips.net/video/s6EE1HLCYJc/видео.html
And here is the new lathe.
ruclips.net/video/pc1ExHc80cg/видео.html
man! outside of the amplifier i LOVE the jigs you made (i.e. router lathe, chop saw jig). way to go! plans for them anywhere?
Thanks for watching!
This is not how to make it, but here is a video of another way to use it.
ruclips.net/video/s6EE1HLCYJc/видео.html
Here is how the new lathe is made.
ruclips.net/video/pc1ExHc80cg/видео.html
Amazing.. such creativity with the jigs. Truly a master.
Thank you!!
The wood lathe was more interesting than the project 😁
Thank you!!
Dude!!, What great craftsmanship you're showing. I like your use of equipment too. Next to the splendid result.
Yeah.
Beautifully Designed master piece well done.
Thank you!!
Entertaining to watch? Yes. Two things; Who has these tools? and Why if they are not for sale? Anyway, very cool.
Thank you!!
Brilliant!
I have no talent so I just put mine into a tapered pint glass where it doesn't quite reach the mid point.
Thank you!
That sounds good too!
😂
I had to settle for buying a used JVC MP3 player, and patch my phone into Audio In.
It is really nice!!!!
Thank you!
Excellent work !!!!
Thank you!!
good products
Thank you!!
EXCELLENT, CONGRATULATIONS.. IF IT WAS NOT SO WORKING I WOULD ASK YOU FOR ONE AS A GIFT....
Thank you!!!
Gotta have one! Only, I think I'll use a router and make the chamber in two halves so as to make boring a lot easier. Will have to make a video of my own. Thanks for the inspiration.
I think it is a good idea!!
@ 5 minutes you fumbled quite a bit with the vacuum shroud interfering with changing the bit.
Please consider removing the screws and hold the shroud with rare earth magnets or with hook and loop tape.
Thank you!
Actually, I didn't have much trouble.
I need a drill bit with a longer shaft than that...
wow
Yeah!
Dovresti provare a fare,se ti ricordi i grandi corni dei vichinghi chi con la loro estensione e un boccale più picco da dove uscirà la musica ma molto piu grande tipo come una pipa per rendere l'idea,io lho sentito ma è impressionamte
Thanks for the comment!
I tried a loudspeaker that spread out like a horn, but it didn't sound very good.
I am sure it would have to be made in a strictly calculated shape, but I didn't have the knowledge to do that.
I would like to make one someday!
Dove posso mandarti un video di istagram di un propotipo
nasıl satın alabiliriz ?
Thanks for your comment!
Unfortunately, it is sold only in Japan and cannot be shipped overseas.Sorry..
Можно не заморачиваясь в бокал для пива закинуть тоже будет лупить нормально
Good solution!
This cause to much distortion of sound
Expectations are too high...
im 43 seconds into this video and already blown away by that hand fed lathe. outstanding.
Thank you!!
Workmanship of highest levels. It was a pleasure watching these taking final shape. Absolutely beautiful.
Thank you!!
*_What does the alarm clock sound like in this, like HELL?_*
Yeah!
Maravilloso, el trabajo de la más alta precisión en la elaboración del tratado,e identificación de la materia prima 👌😎. Exselent
Thank you!!
Patenta el invento antes que te lo copien. Y vendelo, vas a ganar mas que en youtube. Yo sin duda te compraria uno. Realmente amplifica los sonidos. Es un poco tenue con los graves pero para eso ya estan los dispositivos electrónicos.
Thanks for the comment!
I'll consider it.
Music without that shit is more rich and volumetric. With = sounds like cheap radio lol
Sorry you did not like it.
Just amazing! Wow! Well done. Beautiful and modern with the appearance of simplicity. Not easily done.
Thank you !!!
Outstanding, not just the product, but all of the tooling and fixtures. I am truly impressed!
Thank you!!
Please check out my other videos!
www.youtube.com/@7chome_seisakusyo/playlists
I dont have that skill or tools but does anyone know of these are for sale?
Thanks for the comment!
Unfortunately, it is sold only in Japan.
It seems that an overseas forwarding service has recently started, but I am not familiar with it.
www.creema.jp/c/7chome_seisakusyo
If you vary the 2dn reflector depht, can you "equalize" the sound? I mean, get more or less bass or high?
I think it's possible, but I'm not sure.
It is interesting to try to make it an adjustable type.
Great craftsmanship. May I purchase this amplifier? I believe this would help me, I don’t hear as well as I used too. Please answer this comment!
Thanks for the comment!
Unfortunately, it is sold only in Japan.
It seems that an overseas forwarding service has recently started, but I am not familiar with it.
www.creema.jp/c/7chome_seisakusyo
Very nice! …one thing to ad may be a small hole so that the phone can be charged while on the device
Thank you!
I often get that feedback, but it would make the unit much thicker.
I am trying to think of a better way to do this!
to much work i just put mine in a plastic cup😂😂
You are a genius.
Should try finishing with carnauba wax.
Looks good! I'll check it out.Thank you!
You could have bought a used mini lathe for all the labor you put into that dowel jig brotha.
My labor charge is almost free.
By the time you finish this project, they’ve already come out with a new phone that won’t fit in your stand anymore
If the phone is that big, it's loud enough to be okay.
What was the very first material you cut? It looked similar to a wood I salvaged but I don’t know what it is.
Ipe wood. Also known as "ironwood."
Decking material used for boardwalks in public facilities.
Very hard and heavy. Sinks in water.
I use the leftover material from when I built a wooden deck at my home.
I love the look, your work, and your shop. But I have to say, it didn’t really sound good. To me it sounded like it was blowing out the highs and drowning out the mids and lows.
Thanks for the comment.
Береги пальцы, Сеня! Все это хорошо, но здоровье важнее, говорю как инвалид, которому тяжело что мастерить, но жуть как хочется! Good luck!
Thank you!
I got a little careless and cut my finger.
Good design sound same sony qualty .ı hope phone too sony xperia :) hello from turkey
Thank you!!
I put my phone in a small ceramic bowl on the table when I cook, it also acts as a nice passive amplifier
I think that sounds good!
Wow the wood lathe jig is brilliant! 👍 and so are all your workmanships. Good skills you share ❤thank you bro.
Thanks for watching!
This is not how to make it, but here is a video of another way to use it.
ruclips.net/video/s6EE1HLCYJc/видео.html
Here is how the new lathe is made.
ruclips.net/video/pc1ExHc80cg/видео.html
@@7chome_seisakusyo thanks bro❤️. Will check that our 👍
super cool i love it, i designed resonation systems in my younger days for musical instrument makers, you should check out helmholtz resonance theory for amplification I think it could help you with your next design iterations and it would also help to add some well place sticky back felt in the cavity to absorb some of the higher frequencies.
Thanks for the comment!
I'll consider it.
for water... and for sound, eblow are better than curve.
Thank you!
Do you have one available for sale?
Thanks for the comment!
Unfortunately, it is sold only in Japan.
It seems that an overseas forwarding service has recently started, but I am not familiar with it.
www.creema.jp/c/7chome_seisakusyo
Wow, I didn't know there was ype in Japan
It's sold for wood decks.
This is made from the scraps of wood.
@@7chome_seisakusyo Interesting, ype is a very common tree here in Brazil, we separate them by the color of flowering, including the pink color is very similar to the flowering of the Japanese cherry tree.
Mejor compro una bocina y los pongo con Bluetooth 😂😂😂😂
That's right.
Bro your finger are to close to the router. Holding a quite small piece with your bare hands could resulting in other bloody pieces... wtf
Thanks for the heads up.
I'll be careful!
@@7chome_seisakusyo a clamp maybe from wood would be a solution. Anyway, result is great.
Magnificent !
Are these for sale?
Thanks for the comment!
Unfortunately, it is sold only in Japan.
It seems that an overseas forwarding service has recently started, but I am not familiar with it.
www.creema.jp/c/7chome_seisakusyo
BRAVOOOOOOO, awesom video, perfect work and product, bravo and respect, from old BG.
Thank you!!
Woaw I was impressed by the final product BUT YOUR JIG ARE OUT OF THIS WORLD!!!!!
Thank you!!
Please check out our other videos!
ruclips.net/p/PLUqfda64r-HYqN-c_8tdBoYBJ7IRM3v2u
Your craftsmanship is awesome but, it still sounds like shit! sorry! and I have 15 speakers with 2500 watts playing this, so I get it! I don't think it's possible to make an Iphone sound great without earbuds or head phones! But, nicely done!
Thank you!!
Imagine finding this gem in an antiques store in 2050. Good luck finding the fitting phone :)
Thank you!!
I’m sure it’s nice and sounds great; in person - but the skill and ingenuity of craftsmanship… I could watch him build anything just got the ingenious ideas and jigs.
And bonus; some great music I looked up and found some free for content creators songs.
Thank you!!
Add a charger to that and you’ve got something great
Thank you!!
Great interesting vid 😅
Thank you!!
It's not often I find a design this well crafted. Very well done!
Thank you !!!
Bucking Frilliant!
Tucking Fhank you!!
amazing , 2 things , please could you do a video on your dowel maker , it is of interesting construction , and the second , Konnichiwa from Australia .
Thanks for the comment!
I'm thinking about updating the lathing jig, so I'll shoot a video at that time.
ruclips.net/video/pc1ExHc80cg/видео.html
This really cool. Good for traveling! A lot of work to build but still really cool!
Thank you!!
AMazing Job! I have only Pine, Maple and Walnut which one I can replace with Iron Wood sound Reflectors?
Thanks for your comment!
The harder the reflector, the better, so maple would be a good choice.
For reference, I felt that lighter and softer wood for the main body would give better sound quality.
( This was surprising to me! )
@@7chome_seisakusyo thx, I do not drill press so I will make with rectangular channels to the time being, Great Job!
Great wood working skills, nice finished product but it sounds horrible honestly, lots of echo, not a clean sound.
I'm sorry you don't like it.
Your tools (the router jig) is insane and amazing
Thank you!!
素晴らしい‼️凄いですね‼️
ありがとうございます!
Sehr schöne und präzise Handarbeit. Meinen Respekt!
Leider kein Internationaler Versand
Thank you!!
Excellent crafted work - best from Germany
Thank you!!
Impressive.. I really want hear it up front..
Thank you!!
"how many drills do you need?" this guy: "yes"
4.
❤wow good job
Thank you!!
Pura calidad en el trabajo realizado.con resultados exelentes.. gracias hermano x el aporte.. saludos desde Venezuela... gracias..
Thank you!!
nice❤🎉
Thank you!!
How to order it?
Thanks for the comment!
Unfortunately, it is sold only in Japan.
It seems that an overseas forwarding service has recently started, but I am not familiar with it.
www.creema.jp/c/7chome_seisakusyo
God Bless you!
Thank you!!
Best sound quality among others I have seen. Congrats!!!
Thank you!!!
creative idea and I really like it. very inspiring
Thank you!!
I have a jbl
You have an amp too?
That is awesome! Great video!
Thank you!!
genius
Thank you!!
the sound is more linear without your acoustic amplificater, you add resonance in mid, kill the high and don't get more bass
but it's louder yes
Good.
Maybe you are right, I am not an acoustic expert, but the most important: it does not sound like a smartphone any more!
The sounds are not so nervousness and with some app you can use an equalizer to adjust the things.
すごく綺麗にできました! Very nicely done.
Thank you!!
Very cool
Thank you!!
What, all that and no Stevie Ray Vaughan?
Nice!
Excellent.... now to make it so you can get power to it.
Hmmm, I'll think about it..
Nice job.👍👍
Thank you!!
Excellent work. It is so satisfying.
Thank you!!
I want the walnut one. Beautiful.
Thank you!!
Well, was the builder a sound engineer, where did the design come from. Looked cool, but.... I've accomplished the same volume increase with toilet paper rolls.
Toilet paper core is the best solution.
Do you display it in your room?
Elegance
Thank you!!
Вот это аналоговый усилок!
Yeah!
Splendid. And where can one buy them?
Thanks for watching!
Sorry, this is only available in Japan.
They make an app for that. Just kidding.
That would be awesome if that happened.
Nice craftsmanship.
Thank you!!
very good & owsome project ty
Thank you!!
Beautiful craftsmanship.
Thank you!!
Selling these? The treble is decidedly amplified, while sounds like the bass is not. Bummer
I'm afraid yes.
A noticeable difference ❤ I like it . Well done !
Thank you!!
Thumbs up!!!!!!! bravo for design and idea
Thank you!!
あんまり 変わらないですね😅
Perhaps the auto-gain control has been activated during recording.
The change in sound when the phone is removed is consistent with actual hearing.
tem o projeto deste torno ? gostei dele muito interessante
Thanks for watching!
This is not how to make it, but here is a video of another way to use it.
ruclips.net/video/s6EE1HLCYJc/видео.html
Here is how the new lathe is made.
ruclips.net/video/pc1ExHc80cg/видео.html
Отличная идея. Достойное исполнение!
Thank you!!