- Видео 118
- Просмотров 352 378
Woodturning with John Marro
Добавлен 7 июн 2013
Sometimes I think I am wood worker, sometimes I think I am wood turner. Maybe I will entertain an audience with my unique way of struggling through a project? Who knows? Either way, come along with me on a journey of learning wood turning and keeping all my fingers attached to my hands.
Wood Turning Maple | Experimenting with New Techniques
Sometimes we want you to try something new as we grow and change our maker journey.
I picked up a maple turning blank and headed out to try out a new basic shape to help move towards an exciting change to my woodworking fun.
Tools I use:
@LagunaTools - Revo 15/24 Lathe
@EasyWoodTools - Easy Chuck, Medium Finisher and Rougher
@Carterandsontoolworks - 1/2” Bowl Gouge
@ACKSWOODPASTE
For a 15% discount use Marro15 at checkout
ackswoodpaste.com/shop
#woodturning #handmade #maple #lathe #bowlblank
I picked up a maple turning blank and headed out to try out a new basic shape to help move towards an exciting change to my woodworking fun.
Tools I use:
@LagunaTools - Revo 15/24 Lathe
@EasyWoodTools - Easy Chuck, Medium Finisher and Rougher
@Carterandsontoolworks - 1/2” Bowl Gouge
@ACKSWOODPASTE
For a 15% discount use Marro15 at checkout
ackswoodpaste.com/shop
#woodturning #handmade #maple #lathe #bowlblank
Просмотров: 3 011
Видео
Wood Turning Maple Candlesticks | Beginner Project
Просмотров 123Месяц назад
Wood Turning Maple Candlesticks | Beginner Project I picked up some green glass inserts off of Amazon and wanted to see what I could do with it. My wood turning journey started off with turning candlesticks, so it is always fun going back to basics. I used a maple turning blank I picked up from Rockler for this project. Tools I use @LagunaTools - Revo 15/24 Lathe @EasyWoodTools - Easy Chuck...
Turning Teakwood Into A Festive Bell: Early Christmas Woodturning Special
Просмотров 339Месяц назад
Turning Teakwood Into A Festive Bell: Early Christmas Woodturning Special I picked up some teak from Facebook Marketplace so I had to turn something! And in prep for Christmas I turned a small bell. Tools I use: @LagunaTools - Revo 15/24 Lathe @EasyWoodTools - Medium Rougher and Finisher, Easy Chuck @ACKSWOODPASTE ackswoodpaste.com/shop Use Marro15 at checkout for 15% off of your order. #handma...
Wood Turning the Bishops and Rooks | Woodturning walnut chess pieces
Просмотров 2152 месяца назад
Wood Turning the Bishops and Rooks | Woodturning walnut chess pieces This is the second in a series of turning a chess set that I received as a commission to build. This week it is bishops and rooks. And as always it is pleasure turning walnut! Tools I use: @LagunaTools - Revo 15/24 Lathe @EasyWoodTools - Easy Chuck, Medium Finisher and Rougher, Small Detailer @ACKSWOODPASTE - Use my discount c...
Wood Turning A Custom Chess Set | Handcrafted Maple and Walnut Pawns
Просмотров 1,3 тыс.2 месяца назад
Wood Turning A Custom Chess Set | Handcrafted Maple and Walnut Pawns I received a commission to turn a set of chess pieces and make a chess board. This is part one of the series. Tools I use: @LagunaTools - Revo 15/24 Lathe @EasyWoodTools - Medium Finisher and Rougher, Mini Detailer, Easy Chuck @ACKSWOODPASTE ackswoodpaste.com/shop Use discount code: Marro15 at check out for a 15% discount #han...
Creating A Stunning Hard Maple Mallet! 🔨| Perfect Project For Beginners
Просмотров 1733 месяца назад
Creating A Stunning Hard Maple Mallet! 🔨| Perfect Project For Beginners This week is a quick project. I have to make a quick gift. So I decided on a carpenter’s mallet. Shop tools are a fun thing to make and there is low pressure on hey they end up. But I think this one turned out great (pun intended). I was inspired by @fromthewoodsyyc . Please check out his channel Please enjoy! Tools I use: ...
Turning A Stunning Cedar Plant Pot | Mastering Segmented Woodturning
Просмотров 1,1 тыс.3 месяца назад
Turning A Stunning Cedar Plant Pot | Mastering Segmented Woodturning This week I started this turn not really knowing how it was going to end up. And when all was said and done, I ended up with this plant pot. Please enjoy! Tools I use: @Carterandsontoolworks - 1/2” Bowl Gouge @sawstop - 10” Job site saw @LagunaTools - Revo 15/24 Lathe @EasyWoodTools - Medium Finisher and Rougher, Easy Chuck @A...
Giveaway! Wood Turning Easter Basket from hard Maple | segmented woodturning
Просмотров 2394 месяца назад
Giveaway! Wood Turning An Easter Basket from a plank of Maple | segmented woodturning Trying out something different this week! I am attempting to make an Easter Basket from a plank of hard maple. The trick is, it starts off as a segmented bowl! Osage Orange Projects - ruclips.net/video/zNwyNtzUcP0/видео.htmlsi=j-lUwPkG6msCIPSr ruclips.net/video/E6_u0SCD0bw/видео.htmlsi=ic4pmFRnU5FqMEMT @Tourna...
Bottle Stopper | Quick Project | Beginners Wood Turning | Woodturning Projects that Sell
Просмотров 1,2 тыс.5 месяцев назад
Bottle Stopper Quick Project | Beginners Wood Turning | Woodturning Projects that Sell I received a request last week to turn a mushroom shaped wine bottle stopper. So, I made one. These sell quick, and for a pretty good profit. They are also super easy and great turning project for a beginner @nilesbottlestoppers are my preferred source for this project. Ack’s Woodpaste - ackswoodpaste.com/sho...
Woodturning Projects that Sell Part 2 | Wood Turning Branches
Просмотров 1,5 тыс.5 месяцев назад
Woodturning projects that sell is a great way to use your hobby to get some extra money! We have a few Crepe Mrytles in the backyard and a few weeks back we trimmed them all back. This week I am using branches to save money on supplies and turn some mushrooms for my wife for an upcoming craft show. Tools I use: @LagunaTools - Revo 15/24 @Carterandsontoolworks - 1/2” Bowl Gouge @EasyWoodTools - ...
Woodturning Maple and Walnut Bowl | segmented wood turning a salad bowl home decor 2024
Просмотров 2,1 тыс.5 месяцев назад
Woodturning Maple and Walnut Bowl | segmented wood turning a salad bowl home decor 2024 My Aunt Shelly messaged me and asked me to make her a large salad bowl to use when she entertains. So I went over to @rockler and picked up some maple. I had some walnut left over from the lamp build in my last video. Tools I use: @LagunaTools - Revo 15/24 Lathe @EasyWoodTools - EasyWoodTools - medium finish...
My Biggest Walnut Open Segment Wood Turning! | Home Decor 2024 | Woodturning a Lamp
Просмотров 3416 месяцев назад
My Biggest Walnut Open Segment Wood Turning! | Home Decor 2024 | Woodturning a Lamp My grandson “gave” us some artwork. He drew all over our lamp in the front room. So I decided make a new one. I have wanted to do a large open segment piece since I did my first one a couple of months back. This new lamp will look great in the house and really upgrade our decor. I picked up the walnut from @rock...
Woodturning Projects That Sell | Wood Turning Mushrooms from Scrap Wood
Просмотров 7 тыс.7 месяцев назад
Woodturning Projects That Sell | Wood Turning Mushrooms from Scrap Wood
Woodturning A Live Edge Candlestick | Wood Turning oak?
Просмотров 5417 месяцев назад
Woodturning A Live Edge Candlestick | Wood Turning oak?
Shop Update | Making A New Workbench For My Lathe Tools | French Cleat Wall
Просмотров 1187 месяцев назад
Shop Update | Making A New Workbench For My Lathe Tools | French Cleat Wall
Woodturning AAA Figured Maple Blank to Bowl! | Wood Turning a Beautiful Bowl
Просмотров 1427 месяцев назад
Woodturning AAA Figured Maple Blank to Bowl! | Wood Turning a Beautiful Bowl
Segmented Woodturning with Decorative Base | Wood Turning Maple, Walnut, and Cherry
Просмотров 4 тыс.8 месяцев назад
Segmented Woodturning with Decorative Base | Wood Turning Maple, Walnut, and Cherry
Segmented Christmas Ornament | Woodturning Walnut and Maple
Просмотров 7128 месяцев назад
Segmented Christmas Ornament | Woodturning Walnut and Maple
Woodturning Christmas 3 Ornaments | Maple and Bloodwood
Просмотров 111 тыс.9 месяцев назад
Woodturning Christmas 3 Ornaments | Maple and Bloodwood
Spalted Log Transformation: Woodturning a unique bowl
Просмотров 3429 месяцев назад
Spalted Log Transformation: Woodturning a unique bowl
First Time Trying Open Segmented Woodturning | Stunning Cedar Vase #rocklertrythatchallenge
Просмотров 1,2 тыс.9 месяцев назад
First Time Trying Open Segmented Woodturning | Stunning Cedar Vase #rocklertrythatchallenge
Woodturning Wine Bottle Stoppers: Great Gifts For Any Occasion! | Projects That Sell
Просмотров 15710 месяцев назад
Woodturning Wine Bottle Stoppers: Great Gifts For Any Occasion! | Projects That Sell
Stunning Open Segment Woodturning from offcuts! | wood turning Osage Orange/Walnut
Просмотров 63710 месяцев назад
Stunning Open Segment Woodturning from offcuts! | wood turning Osage Orange/Walnut
Woodturning a Stunning Osage Orange Vase | Segmented wood turning
Просмотров 53511 месяцев назад
Woodturning a Stunning Osage Orange Vase | Segmented wood turning
Woodturning a Beautiful Elm Bowl | A Great Gift
Просмотров 67011 месяцев назад
Woodturning a Beautiful Elm Bowl | A Great Gift
Something Amazing from scrap wood and pallets | wood turning a segmented bowl
Просмотров 481Год назад
Something Amazing from scrap wood and pallets | wood turning a segmented bowl
Turning A Walnut and Maple Segmented Vase | Experimentation with color
Просмотров 632Год назад
Turning A Walnut and Maple Segmented Vase | Experimentation with color
Wood Turning an Amazing Segmented Sapele Vase
Просмотров 3 тыс.Год назад
Wood Turning an Amazing Segmented Sapele Vase
Wood Turning a Maple Mallet | Turned Mallet
Просмотров 273Год назад
Wood Turning a Maple Mallet | Turned Mallet
Wood Turning a Beautiful Segmented Vase | Turning Walnut Cherry & Maple
Просмотров 673Год назад
Wood Turning a Beautiful Segmented Vase | Turning Walnut Cherry & Maple
The background sounds remind me of star wars podracing
@@lemuero there is a big field across from my shop, and motorcycles ride around there all the time. So that is the sound sped up. Thanks for watching!
John you beat me to it using a 3D image on the bottom of a segment turned bowl. Nice job!
@@make-somedust thanks! Let’s see yours when it is done!
I like that, its different!!
@@ACKSWOODPASTE thanks Tom!
I also have the Laguna Revo 15 24 i also got the mobile base bed extension with outboard turning capabilities plus the light that comes with the lathe just wish I waited and got the 10% off I'm knew at turning is a bit intimidating so was cutting dovetails the first few attempts so I'll keep working at it right now trying to get the hang of turning endgrain how do you like your Revo 15 24 and have you added any ballast?
@@eugenelayhue1932 I have had it for just over two years and really like it. I have heard Lagunas have circuit board issues, so I leave it unplugged when not in use. I have no ballast added. It doesn’t move around on me too much, and if it does, I slow it down. Thanks for watching!
Good start to s change in your wood turning journey John. Gary
@@ThePapa1947 I am looking forward to expanding my horizons! Thanks for watching and commenting Gary.
@@WoodturningWithJohnMarro I have a few other things I like to do that involve wood but not turning. But I am so addicted to turning it is hard to show everything. But maybe I will try😎
@@ThePapa1947 audiences are finicky, they get attached on one thing and are weird about change.
I like it John! 👍🏻 Can’t wait to see some carving! 😊Take care and thanks for sharing!
Thanks Bill, I am excited too. I have some bits for the Dremel and some new small files to help out as well.
looks good
@@WoodworkingTop535 thanks!
Those turned out nice John! 👍🏻 Thanks for sharing! Cheers
@@billm4560 Thanks Bill, the maple really is nice to turn.
@@WoodturningWithJohnMarro I was wondering what wood you used! That cone sure came in handy! 👌
@@billm4560 I have used it a few times now and really like it
I have made that same mistake and found that if you just turn your belt sand er to flat it works out better. But I have found that sandpaper with a piece of glass just works the best.
Good idea on rotating the belt! You are 100% right, a flat surface hand sanding would have been best. I should not have been so impatient. Thanks for watching and commenting!
@@WoodturningWithJohnMarro Just another suggestion. I took a piece of 3/4 Ply and put a handle on it and glued a piece of that grippy drawer liner, it allows me to get even pressure. But also found depending on the grit on the belt, only use enough pressure to keep the segmented ring from moving. You will lose material quickly.
@@timplumey-fl5xn good to know! Thanks
That bell turned out really nice John even though you had some trouble! I have a 38” drum sander and those would be way too small mine! 😁 I was thinking about a sled like you mentioned! I really like those cones you used! Are you going to sell any? Thanks for sharing! Cheers
Hey Bill! I think I recovered it pretty well. It was just wonky lol. I have a 16” Jet Drum Sander, and will definitely be making a sled for it. As far as the cones go, I will definitely sell them. I have asked my son how much for them and I will let you know. Thanks for watching and commenting.
Nice beautiful ❤ how much cost
I gave it to my daughter, thanks for watching
Newbi, making these in 3 pieces.. not one finished yet..lots of parts.. i like this way..
Thank you for watching
Cómo se llama el disco blanco? Muchas gracias
El disco blanco es para torneado de madera segmentada.
Fun video. I enjoyed it and learned a thing or two
Thanks! I am glad you were able to enjoy and learn along the way :)
What did you learn?
@@WoodturningWithJohnMarro I learned about indexing
@@myhoneyshandmade1077 excellent! It is a great way to even marks around the piece when you are working on.
Yet another amazing video! It’s beyond me how you are capable of doing such meticulous work as well as tedious!!! Thank you for sharing!
It is very relaxing, just the sounds of the lathe and finding the art inside the wood. Thank you for watching and the kind words :)
Those are looking awesome as always John! 👍🏻
Thank you!!
Carnuba wax? The same as car wax?
Carnuba is a type of wax. It comes from the carnuba palm. It can be used in many different applications.
Hello John, those are beautiful chess pieces you make and a great finish.
Your work is great too! Thank you and thanks for watching!
@@WoodturningWithJohnMarro Making a chess game and board is on my bucket list, and it will happen someday, but because it will take up a lot of time I don't have time for it yet
@@hbwoodturning17 yes, it does take time. Each piece takes 30+ minutes. Except for the knights, those take me about 90 minutes each.
Nice work. I’ve made a few sets now and it looks like we’ve pretty much got the same process. I’ve started recording some of my woodworking with the idea of starting a new RUclips channel specific for woodworking. However, in order to get the audio, I need to record at a live speed and then speed it up in the editing software which consumes a ton of space and processing resources. Is this what you do or is there some way to record Timelapse that also captures audio?
I record everything on my iPhone at normal HD, then edit in an app on my phone. I record segments, and edit each segment as I go rather than all at once. I am planning on upgrading my recording and editing process this year though. Go luck! And thank you for watching.
Whoa! So impressive! Great work!
Thank you!!
Those are turning out really nice John! 👍🏻 Looks like a lot of work? Thanks for sharing! Cheers
Hey Bill! Thanks for watching. It is truly a test - eyeballs and calipers - to try and get the pawns identical. Thanks for watching!
Very NICE ❤❤❤❤❤
Thank you!
Cool, I've never seen a Miter Set. TIL.
It is nice set and really helps setting the mitre gauge. Thanks for watching!
Stunning mallet. I’m just getting into turning so I’m going to have to put one of there on my to do list.
It is an easy project, and a very useful tool. Thanks for watching and commenting! Enjoy
As usual another amazing project! 👍🏻 Thanks John!
Thanks Bill and thank you for watching!
Gorgeous! It absolutely stuns me how much wood it takes to make a candlestick! If my husband ever utters interest in this woodworking venture, I am going to have to buy him a boat! Oops. Mallot!
Thanks! Thank you for watching!
A lot goes into your work. So pretty!
A typical takes about week to make. Thanks for watching!!
Very nice piece John. The beads look great. A touch deeper would have given nice round beads. Beautiful work.
Thanks! I agree, after the bowl was off of the lathe I actually thought I should have gone deeper with cuts. Thanks for watching!
FYI. I use that beading tool. It is great
I really liked the ease of use on it! Thanks for watching!
Nice looking bowl there John! 👍🏻 Man don’t you just hate those catches! I’m working on a segregated bowl now and that’s my trouble is getting a catch now and then! 😡 I’ve tried different tools but still having trouble! I have one small carbon tool that seems to work better than all the others I have! I know it’s me! Lol Where did you find that live center you had the chuck on? Been trying to find one but no luck! Thanks for sharing your work! Cheers
I hate the catches too! In this case the catch was with my 1/2” bowl gouge and not one of the carbides. So far I have directly related it to sharpness and the amount of tool I have extended over the tool rest. Also, since I have moved up to 24 segment rings the catches happen less often. As far as the live center goes, I ordered it off of Amazon, it is from Penn State Industries. Thanks for watching!!
@@WoodturningWithJohnMarro Thanks for the info John! You remember the threads on it? My chuck is 1 1/4”…. I may have to get another chuck!
@@billm4560 I ordered a 1”, 8TPI because that is what my second chuck has. I didn’t want you to purchase another chuck :)
@@WoodturningWithJohnMarro 👍🏻
Looks great John well done, something I've yet to try is segmenting, congrats on the subs count, Kind regards From Will 👍 😊😊
Thank you! I really enjoy the segmented turning. I like thinking through the all the pieces and putting together.
lovely piece
Thank you!
over 100 now!! great job
Much appreciated!!
Beautiful piece!
Thank you!
What patience and skill! My dad loved woodworking…great turnout of the Easter basket!
Thank you! It was a fun turn :)
Ouch my ears hurt now LOL
I forgot what music I loaded with this one! Sometimes you just gotta let the rock and roll out! Thanks for watching Gary :)
I get it...it if would have been CCR you could have played it on max LOL
Sweet project
Thank you! I was nervous through that whole turning. I thought every time I touched the tool to the piece it was going to explode :)
@@WoodturningWithJohnMarro I bet
Fun video. I havnt turned s lot since getting the new laser last August. Thinking of making a vase from a neighbor's dead limb!
Sounds like a fun project! Thanks for watching
Well you got through it and it looks great in the end. Not all projects go smoothly and just adapting to what is happening is something we all need to do. This will not necessarily be of any help for what you did but it reminds of all the patterns I built at work where I glued them up in halves. So when it was done I had two pieces that looked alike which you were looking for. Sometimes they were booked end to end as well. As far as cutting something in half I would make a special fixture to hold it. For what you have I would have framed it with flat sides that were hot glued in place. This would let me rotate the piece and keep it indexed. Plus a way to measure the exact center. Might sound complex but it is not. Plus I would know I would get what I was looking for. It could be cut on the table saw but I would do it on the band saw. And I know yours was not tall enough. My Titebond lll is very thick and very slimy. I doubt I will buy anymore when this is one. Nice finished project and who ever wins will be very happy. Gary
Yeah, after I saw how those pieces came apart, first thing I thought of was some kind of jig to hold piece. But, live and learn! Thank you for watching and commenting Gary!
Sure thing. I tend to think of fixtures because I made so many to hold odd pieces and also just to set something up to locate positions. I continue doing similar things after I retired.
John, you did a really nice job with this. I was going to suggest that you do the cut on the bandsaw but you said that your saw isn’t quite large enough. I guess all I can say is that you need to plan for that step. I will have to plan for my round bowl to be no more than 5” tall so that I can use the bandsaw. You did a fine job. Top tip: Nothing is unrecoverable.” It May not be worth it at the moment, but down you may dream up a great recovery project. Thanks for sharing this. And welcome to the Ack’s family.
Hey Doug! Thanks for the feedback. I have an 18” bandsaw on my wishlist! This one definitely is was in uncharted territory for me. I want to continue to push my turning skills. So I wasn’t exactly sure of the process beyond cutting in half after I turned it…hahaha! Thank you for watching!
That turned out awesome John! 👍🏻 Had a few laughs along the way too! 😁 Loved the bandsaw laser lol! Not sure on the glue being too thin! I use it sometimes but also use gorilla glue too! Glad you’re feeling better and can’t wait for another video! Thanks for sharing your work! #1000subsforjohn
Thanks! I bought a new bandsaw blade before the end of the video, it was startlingly sharp! It cut the Osage orange so differently. Thanks for watching and commenting Bill
Hey Bill you are the winner! If you have Facebook or Instagram message me so I can have your Ack’s Kit sent over to you! Thanks again for watching!
That turned out really well, I like that!
Thanks Tom!
Have you ever had any problems with the bottom cracking? I am just getting into segmented turning and am seeing alot of people using floating bottoms on their bowls. I am making urns and using epoxy to fill the bottom. What are your thoughts on this?
I question how much wood movement there is with such small pieces? I don’t have decades of experience to pull from though. In the three years I have been doing segmented turning I have not had any issues. I have not done any epoxy bottoms. I hope that helps? Thanks for watching!
Cool looking bottle stopper!
Thanks Gary! This one sold already too :)
Wow stunning! ❤
Thank you!