- Видео 10
- Просмотров 72 679
Beto
США
Добавлен 22 июл 2016
Southern California Based, wrenching, Jdm, off-road, wheel fitment, time attack, drifting !! find it here
I also cover camera gear and content creating
I also cover camera gear and content creating
4runner BTF long travel @ John Bull Big Bear Ca.
4runner BTF long travel @ John Bull Big Bear Ca.
Просмотров: 26 948
Видео
Full size Chevy @ Jackhammer, Johnson Valley
Просмотров 8042 года назад
We followed a group of very well built and capable buggy's up one of Johnson Valleys most aggressive trails full of loose boulders and tight squeezes. Rode shotgun as My buddy took his beast of a trail rig up jackhammer, dually width one ton axle linked on 47 inch tires made for a good time, and we almost lost the door
My Solid Axle swap 2019 (re-edit)
Просмотров 9883 года назад
I deleted and re edited this footage from my solid axle conversion original edit had background music which caused copyright claims I could not clear Footage from mid 2019 This group of clips were my first few videos uploaded to RUclips on my channel, minimal gear, No audio knowledge, no clue on frame rates, or editing cleaned up and trimmed without sped up footage and "unusable music" shot on ...
Hardline Land Co. @ Cougar Buttes 2021
Просмотров 9423 года назад
Annual Hardline land Co. Ugly sweater run 2021 at Johnson Valleys Cougar Buttes
240sx s14 Rear mount radiator
Просмотров 3923 года назад
removing old tube structures on a skinned s14 drift chassi and mounting a large radiator with a structure tied into previous frame plates and bumper support
Krawl Wars 2021
Просмотров 2,6 тыс.3 года назад
unlimited class Krawl wars 2021 Hosted by @Trail_Miltia
WRX gets a Rwd conversion
Просмотров 2 тыс.3 года назад
Subaru wrx gets a rear wheel drive conversion using @thezfdesign center locked differential spool, here's a quick glance at the process. PS: Cringe at 10x better comment .......... footage W/ IG: @Robthisbaus music: ruclips.net/user/redirect?event=video_description&redir_token=QUFFLUhqbXRidmJGWXl4WnU3cDMwZS02WVZjTGo5ajllUXxBQ3Jtc0tteUtZTFpnaVg0NkU1eEt5ZnNVRGU4TEdGQ0hiWDRhakI5blZsQ3NTNWpXOFNyT0t...
Toyota Solid axle IFS Hubs and Tacoma Brakes upgrade
Просмотров 10 тыс.3 года назад
Put off doing this long enough, 3rd Gen solid axle pickup gets ifs hubs tacoma brakes and new wheel bearings ready for the next trip !
Hardline Land Co. 4runner 3rz swap (Raw footage)
Просмотров 8 тыс.3 года назад
The 22re in Hardline Land Co. 4runner has finally died, along with electrical shorts, structural damage, transmission clearance issues and more... new engine, resealed transmission, fresh electrical and accessory control gets this first gen 4runner running correct before a trip to Moab Utah.
Toyota head bolt thread repair, using HUHNSOLUTIONS NS300L.
Просмотров 19 тыс.5 лет назад
HUHNSOLUTIONS NS300L Head bolt repair kit repairing Toyota 2AZ head bolt threads
What year of tacoma calipers and rotors?
What year Camry did this stripped head issue apply to? Or did it happen more frequently with different years of Toyota Camry?
Do you know what size banjo fitting and banjo bolt you got?
What keeps the drill from going too deep? But what is in the block that is stopping the drill bit. I am just curious. I know you need to measure to be sure. It seems odd to me that the bit stops.
I’ve been rocking the same rwd conversion since 2017
Can you put a link where you got the banjo fittings?
Local shop in Ontario California that goes by G&J aircraft
Awesomeness
Been looking at this setup. Are those Billsteins in the rear? How much did the rear set ya back?
just rubs and rubs.. tire keeps rubbing yuck
Hello there, My 2007 Camry has 4 striped head bolts. What do you think about rethread them?
6shooter arms on a 4stuck knuckle is wild to me lol.
Curious why turn the hub down
So it clears the rotors
@tylerwelch6988 id probably opt too turn down the rotor😉
@ you could, but then you’re turning down multiple rotors over time. This is one and done.
@tylerwelch6988 true I just don't like how little hub material is left near the studs .
@tylerwelch6988 have you done this mod iam debating what to do. Lol
Any Engine or Drivetrain swaps/mods?
Have to tap as far as you can leave about 1/4 stickout. Clean out 3x Carefully tighten the jog as it flexes and can go out of center even with centering pin.
Looks sliiiiiick!!! Send me some pointers on converting 1980 rear drums to disc. Thanks
I have a 2007 Camry that I picked up for nothing as a non runner, blown head gasket, compression was getting into the cooling system. It had the pistons changed in 2016 by Toyota. When I removed the head bolts, several of them were very lose, but the threads didn't pull out and they seem to be in tact. The deck on the block seems to be fine after checking it with a straight edge and feeler gauge, the head is warped approximately .006, and will need to be resurfaced. I'm debating whether or not to invest in repairing the engine. The last thing I would want is to put in back together and have the head bolts pull out. I'm considering buying this kit.
If the bolts were loose you already have this problem.
@@jonathangarzon2798 Yup. I purchased the Huhn solutions repair kit and got it running a couple of months ago. So far its running fine.
the perfect 3rd gen <3
Hi, what brand and size are the front leaf springs? thanks
They are a company that no longer is around “Dave’s offroad Performance” These are the 35 and below leaf kit with the 2nd to bottom leaf removed
Good looking truck and set up, It's just not my thing to do all that crawling and do damage, but to each his own.
Not a pickup disc its called a reluctor ring. Its not a tri-square, its a double hex (very different). Thanks though
Thanks for the video. Has anyone used this kit after buying used instead of a new set? Should i repair all 10 bolts threads with this kit on my Camry or just the ones that are broken? I just have one broken threads so far. Thanks.
if you've got a 2.4L 2006 or earlier, likely the six around #2 & #3 cylinders are stripped. Those two middle cylinders compress simultaneously- lot of psi. The four threads in the perimeter seem to hold
Do you run any bump stops on the front ?
What’s the part number on those rear studs that are longer?
610-312
How long did it take to do this repair?
How is that 4Runner so wide ? I know it has the BTF kit which is +4.5 over but 4Runner is wider !!
Hey dude how in the blue you got your tires to look so wide out? I have a 4th gen and would love to see my baby like that.
the front is 3.5 wider from the long travle and the rear probably spacers
I'm going through this process right now. I get the impression that you're sliding the whole IFS hub on, does that mean you're skipping out on the snap ring for the birf? Is the outer snap ring necessary?
Awesome 4Runner! I got a 3rd Gen as well ! Makes me wanna go out there, I didn’t know about this one in big bear.
3:35 - exactly why you said it's a good thing to replace the inner axle seals! 😆
Awesome 3rd gen man!! A live axle is still better!!
What new gaskets are needed for this job?
@@wirenuts5910 Thanks! Your reply was very helpful! I appreciate it! I’m at the put everything back together phase now. Perfect timing.
Do you know if you can still fit 15" rims after the rotor and caliper upgrade?
Dude make more vids!! They are hella good
Does LT kits solve our LBJ problems?
Unbelievable, 3rd Gen!
Wow big flex with the working clock
What size tires?
At the time of this video 35x12.5x17
Toyotas are a dedicated group. Always have always will
oh you meant Looong travel
time for lower tire pressures and bead locks...
Bro!! The 1 Ton 4Runner!! 🥰🤣
Dope to see some CV's in there! Most LT builds I see are desert trucks
Yup they work pretty well thanks for watching
You can build a desert prerunner with cvs. They have heavy duty high articulation cvs now. 4x4 all the way.
Nice setup.
Does the 4 runner owner have a insta?
It’s @danieltaco
always replace head bolts Good video
What springs/ lift you running in the rear, I like the stance, I have the same kit but mine sits low in the front
The rear end actually was a a bit high it now leveled out a bit with a rear swing out bumper Rear springs and shocks are OEM springs with bilstien shocks his IG is @danieltaco
This is an costly lifestyle but very satisfying I believe. I can’t wait until I go overlanding. I have a 4Runner also that I would like to build into a nice overland rig.
It’s nice to get outdoors and the 4runner is a perfect vehicle for it
great video well done
Thanks still learning
7k front end
Is it?
@@raulbeltra4765 Yes
Worth it
Is that coheed and cambria in the bg? I want that build.
Pierce the Veil actually lol