Видео

You are missing the point completely. This is a hobby of mine and a way to make money repairing different devices. I did not buy all this to replace one RSX on one PS3.

Yes only SYSCON training needed

What kind of ic that you use to lower the voltage?

@@kecapmantis3205 www.psx-place.com/threads/frankenstein-phat-ps3-cecha-with-40nm-rsx.28069/page-76#post-324546

I have an A00 with a 40nm €750

​@@RedOverlord don't you think this is overpriced?

160c for a few minutes, then I assist with hot air around 220c

First one

yeah haven't done alot of them but usually there is no problem thanks for providing me this IHS tool

Sorry, I'll try to keep that in mind for next time

@@RedOverlord aww thanks that’s great, much appreciated my friend

motorstorm

exactly :)

@@RedOverlord Nice.

its a GPU swap from a later slim model PS3. its to deal with the yellow light of death the original 90nm chips have. 40nm GPU's run cooler, use less power, and overclock way higher.

yes it is :) this is number five

you can contact me on instagram: @toinescustomconsoles and I can sell you one

Sure is, got it for a year and a half now I think. No complaints at all, nicer then the IR based systems

Thank you kief 🙏

In the Netherlands, I don't really do send ins. But I could probably sell you a system. Got multiple of the same model in this week

The programming, resistor changes, and the voltage lowering is to get the new chip running right. The black squares are capacitors I switch out as preventitive maintenaince. In the end I cut the IHS plate from the CPU so I can replace the thermalpaste underneath. Thanks for watching

@@RedOverlord I need to delid my ps3 also, but i'm afraid, i don't have any tools able to fit for the job :/

Thats right, in this case thats me. I make a system out of parts from different ps3's

I responded based on the thumbnail

@@Andr0-Zero we need ogx vids

Not really necessary, I linked all the info necessary and computer booter did alot of videos about this mod.

Thanks sir

Custom stencil made by my friend zzattack. I believe his stencils are available on his github page

there is a tutorial out there somewhere that tells you how to convert a retail xbox motherboard to chihiro. but you also need a chihiro chassis, its not just an xbox that powers it there are many sega specific parts that connect to the xbox board.

@@RedOverlord wow !! thanks for that , im gonna search i hope i can find it !! i have an xbox , thanksss

​@@netten2057 There are versions of Ghost Squad, Outrun 2 (Beta) and Virtua Cop 3, for XBOX 128MO RAM

Think you can run some chihiro games on an Xbox with a 128MB RAM mod

@@jm036 I don't know, but if there is a way to do it, I can do it. I also have a reballing machine and I can make the necessary modifications if there is a way , I didn't even know there was such a thing as Chihiro, I'm just now watching and studying it.

I did not actually, usually I do as a standard maintenance procedure but these looked perfect. customer can solder so if it becomes a problem he can swap them out.

thank you very much! appreciate it :)

I see what you are saying! Probably a piece of cotton swab

​@@RedOverlord probably but it really look like solder to me but still a pretty good job overall 👌🏼

The original xbox revision 1.6 XGPU-B is better but its not backwards compatible. Other then that I dont think so

​@@RedOverlord The XBOX V1.6 has bugs, in 720p, 1080i and 16/9.

No, its kernel and bios are prepared to work only with the specified hardware. Its GPU doesn't even exist on the consumer market, it's a kind of GF4 prototype, game programming expects specific features from this GPU (which are not present in other desktop ones) the only thing you can do on this console is to upgrade the processor and RAM memory. The closest you can come to improving image quality is to adapt an HDMI mod directly to the test points on the motherboard, where you will get a clean, crystal-clear signal, superior to any HDMI mod using the standard cable connection. console. Version 1.6 was also entirely manufactured in China, and had major changes in production quality (for the worse). In my experience, version 1.0 ~ 1.1 does not have a very good analog signal processor, and from 1.5 onwards this processor is not so good again. The best image quality is more or less in 1.2 and 1.4, they also use the improved heatsink on the GPU that does not require a cooler (they are quieter) and accept practically all mods, you just need to find one that has not been damaged by the clock capacitor. Nowadays there are even watercooler solutions with 60mm radiators that are efficient for tdps of up to 45w, pico power supplies with efficiency of almost 90%, low noise, low ripple... so I understand that we have reached the sweet point in the console's life where we have a huge range of possibilities for improving it.

I'm sad that the hacking community has been BUYED by Sony and Microsoft, since the xbox one, we haven't seen anything cool, no modchips, jailbreaks, or cool mods.

thanks!

@@RedOverlord I never knew that Saga made a arcade cabinet using a modified xbox pcb. I thought that was neat! Thanks for the little info nugget! :D Btw this is Lord Virus. Nice to see you doing paid repairs at this high of a standard!

@@nice8D I knew that was you ;) can't fool me with name changes. thank you for the kind words

thank you!

Kind of, its not really an xbox. If you google "Sega chihiro type 3" and then images you can see it doesnt look like an xbox at all. Its a system developed by sega with a "modified" original xbox motherboard inside of it that does the heavy lifting. Im using an original xbox shell for testing purposes only. this motherboard with a chihiro bios will not function at all in a regular xbox chassis.

AKA xbox