Yes but it burns the beautiful powder coating. I would suggest installing it first and see how you feel about it welding it afterwards. I think you'd rip the dots off the container before you ripped the lock box off the doors.
Do I need to worry about water getting in through those holes after installing?If so I'm thinking I could use some clear sealant on the top of the lock box.
You could dab silicone around the holes before installing so you don't see it afterwards and will probably work better. Not sure if it's needed at all though. Could drill a drain hole at the bottom of the door's rec tube just in case and observe.
I found that the lock can be picked easily but it will often only pick half way. Its difficult to pick under the shield. I tried twice they also make this lock with a barrel tumbler. Also can be picked with the right tools. Not every one has those tools.
Ma è un normale lucchetto che uno scassinatore lo apre comunque dal di sotto. Quell'aggeggio serve solo per coprirlo dalla pioggia. A meno che ci va una chiave super speciale.
Ok looks good where do I get one. I already have crack heads coming around looking at the lock. The cordless angle grinder is now the tool of choice for these dirtbags
The only thing a lock does is keep honest people honest! A portable cutting torch kit or a skilled lock picker could easily defeat that lock in minutes!
True. The real purpose of locks is to slow up a determined thief long enough for an armed response to your video surveillance & security system alarms.
Exactly! I like the look of the Master Lock hidden shackle puck for my R.V. and it's exterior compartments. Any idea how & what I can weld in place to stop a lock picker?
Sure that might work if the owner is the only person who needs to use it, but that's not going to help much when the container is on a train that is stopped for whatever reason.
![Baby Kia - GLOVES & DRACS (BLACK AF1s) [Official Music Video]](http://i.ytimg.com/vi/ajm8LeB0qQk/mqdefault.jpg)
Just installed this on my container today, it was a breeze to install. Thank you!
Thank you. Love to hear the feedback!
Marking it out all made sense?
Like the security sticker? 😂
My second purchase of this lockbox, I’m realy happy with the result. My next step is to install two BigAir45 on each of my 20 feets containers.
Great lookin lock!!
Thanks 👍
What size drill bits are needed?
They're 7/16" carriage bolts. 1/2" drill bit gives lots of room..
Can this be welded on instead of bolting it?
Yes but it burns the beautiful powder coating. I would suggest installing it first and see how you feel about it welding it afterwards.
I think you'd rip the dots off the container before you ripped the lock box off the doors.
Do I need to worry about water getting in through those holes after installing?If so I'm thinking I could use some clear sealant on the top of the lock box.
You could dab silicone around the holes before installing so you don't see it afterwards and will probably work better. Not sure if it's needed at all though.
Could drill a drain hole at the bottom of the door's rec tube just in case and observe.
How much to put in ac and just shelves, window, a light & skylight ? Designed to store product like cat litter, soap, etc ?
I found that the lock can be picked easily but it will often only pick half way. Its difficult to pick under the shield. I tried twice they also make this lock with a barrel tumbler. Also can be picked with the right tools. Not every one has those tools.
Deckle? Is that Canadian for decal?
What size drill bits do you recommend?
Will a regular pad lock work on this?
how can you protect your container from plasma cutting the side open???
Porcelain tile the exterior
@@TheContainerGuyTV have you done this before?
Ma è un normale lucchetto che uno scassinatore lo apre comunque dal di sotto. Quell'aggeggio serve solo per coprirlo dalla pioggia. A meno che ci va una chiave super speciale.
What I learn is just too late ! Someone just broke into my container and I am not happy right now ! Mad as hell ! 😤 😠 😡
Same
Locks are only for honest people
How protected is it from a angle grinder?
You can’t. People just cut a hole on the side and skip the lock box
Just had ours broken through with an angle grinder.
Donde puedo comprar esta cerradura y cuanto es su precio ?
I buy it on Amazon
Ok looks good where do I get one. I already have crack heads coming around looking at the lock. The cordless angle grinder is now the tool of choice for these dirtbags
Amazon
@@TheContainerGuyTV awesome
@@ALSomthin They'll just pick the lock on this one, it's quicker & easier than using the angle grinder.
The only thing a lock does is keep honest people honest! A portable cutting torch kit or a skilled lock picker could easily defeat that lock in minutes!
True. The real purpose of locks is to slow up a determined thief long enough for an armed response to your video surveillance & security system alarms.
Exactly! I like the look of the Master Lock hidden shackle puck for my R.V. and it's exterior compartments. Any idea how & what I can weld in place to stop a lock picker?
Sure that might work if the owner is the only person who needs to use it, but that's not going to help much when the container is on a train that is stopped for whatever reason.
🤘
sMaSh dAt LiKe bUttOn 🥴
And subscribe