Hey stepan! One question regarding the components: I have bought the Kickstarter version with all in content in Essen spiel (I was the guy with the hat who came twice to play your game at your booth 🤣) the screws in my version do not fit properly into the dice. They most of the time have an off set and are not completely inside the dice. (Sorry my English is not good enough to explain it better) when watching this video I can see the screws fitting perfectly. Is that often the case or is there some issue with my copy? Anyway, love the gameplay!! Kind regards, Flo
Hello, the dice you see in this video are from the prototype (3D printed), the dice that are in the game are done with the mold and have problems you wrote. It do not affect the gameplay, but does not feel 100% perfect. I had to remove these old dice from all new videos to do not show something that is not in the box. Sorry for confusions, but your copy is correct. Stepan
@@florianschoppler4001 It helps to screw them in, then press them down with the screw driver while loosening them a bit (just a quarter turn) and screw them back in. All under a little bit of downward pressure (not screwing them any tighter!). Mine all sit flush with the surface of the dice.
No, in the first round, it refreshes all protocols and get Technology Tokens, but all of the Protocols are already refreshed so it is not necessary as it would be the same if you do it or not. But it is better to keep it in mind so you do not forget it in the next time.
@@ImAuftragDesBrettspielgotts No, in just the first round. Let me sum it up. In the first round, all protocols are in the refresh state, but during the Protocol refresh phase there are no Technology tokens so the condition on the Invasion board will trigger and refresh (already refreshed) protocols (so in general nothing happens right now) after that it gains X Technology tokens. In the later phase, the protocols are used and their effects are executed. Then, in the second round, they are still exhausted and the Invasion has technology tokens so they are not refreshed. And will be refreshed once all the technology tokens are destroyed by reshuffling players' decks. I hope it is now completely clear to you.
I also have this protocol today where I have to sacrifice a card from my deck. When it was activated, I only had two cards in my deck. I then reshuffled my deck and sacrificed two cards: one because of the reshuffle and one because of the protocol. Did I play it correctly?
No, the action can be triggered only if you have 2 stored resources of the same color to get one back as a discount for the next card that is being played and the second for the effect.
@@ImAuftragDesBrettspielgotts Campaign Card 1: Überraschungsangriff - Vorbereitung 5 Mehr invasoren! 10 Mehr Invasoren! 14 Ende des Szenarios Mine is from Spieleschmiede as well, so either there are 2 versions or you looked somewhere else
@@ImAuftragDesBrettspielgotts i just checked every card, i don't have a "Verteidigung der Basis" card...it's such a shame when such a great game is dragged down by production/translation mistakes 😔
This is not the best translation (it works very similar to the English version) thank you for pointing this out. We had to fix this in the reprint and create stickers for current owners so you can play it as it was intended. But as said in 99% of cases you will shift the last event only so the result will be the same.
Hey stepan! One question regarding the components: I have bought the Kickstarter version with all in content in Essen spiel (I was the guy with the hat who came twice to play your game at your booth 🤣) the screws in my version do not fit properly into the dice. They most of the time have an off set and are not completely inside the dice. (Sorry my English is not good enough to explain it better) when watching this video I can see the screws fitting perfectly. Is that often the case or is there some issue with my copy?
Anyway, love the gameplay!!
Kind regards, Flo
Hello, the dice you see in this video are from the prototype (3D printed), the dice that are in the game are done with the mold and have problems you wrote. It do not affect the gameplay, but does not feel 100% perfect. I had to remove these old dice from all new videos to do not show something that is not in the box. Sorry for confusions, but your copy is correct. Stepan
@@coogison it’s not that big of a deal! It would feel nicer if slit in 100% perfect but the rolls are not affected by it. Thanks for clearifying
@@florianschoppler4001 It helps to screw them in, then press them down with the screw driver while loosening them a bit (just a quarter turn) and screw them back in. All under a little bit of downward pressure (not screwing them any tighter!). Mine all sit flush with the surface of the dice.
@@ActionHeinz will try, thanks!
@@ActionHeinz tested and can confirm it works!! Thanks for sharing!
Did i get that right? Invasion already gets a Technology Token in First round, although it does Not refresh protocolls?
No, in the first round, it refreshes all protocols and get Technology Tokens, but all of the Protocols are already refreshed so it is not necessary as it would be the same if you do it or not. But it is better to keep it in mind so you do not forget it in the next time.
@@coogison ok, then invasion will use protocolls in first two rounds normally ? Thanks for your quick answers btw😀
@@ImAuftragDesBrettspielgotts No, in just the first round. Let me sum it up. In the first round, all protocols are in the refresh state, but during the Protocol refresh phase there are no Technology tokens so the condition on the Invasion board will trigger and refresh (already refreshed) protocols (so in general nothing happens right now) after that it gains X Technology tokens. In the later phase, the protocols are used and their effects are executed.
Then, in the second round, they are still exhausted and the Invasion has technology tokens so they are not refreshed. And will be refreshed once all the technology tokens are destroyed by reshuffling players' decks.
I hope it is now completely clear to you.
Now it clear to me, thanks. Will Play now a few times and afterwatds it is time for Recording a video ;-)
I also have this protocol today where I have to sacrifice a card from my deck. When it was activated, I only had two cards in my deck. I then reshuffled my deck and sacrificed two cards: one because of the reshuffle and one because of the protocol. Did I play it correctly?
Yes, you did it correctly. First sacrifice for the protocol and the second for the reshuffling.
This helps a lot thank you.
Is there a maximum of cards in my training center?
No, you can have as many cards as you want, generally there are almost none restrictions if not exactly stated.
Hi Stepan, can I pay a single ressource from the storage to play a card?
No, the action can be triggered only if you have 2 stored resources of the same color to get one back as a discount for the next card that is being played and the second for the effect.
@@coogison But i can trigger extra Action without using the discount?
the german card of scenario 1 says the game ends after round 14 instead of 16
My Spieleschmiede Version says 16.
@@ImAuftragDesBrettspielgotts Campaign Card 1: Überraschungsangriff - Vorbereitung
5 Mehr invasoren!
10 Mehr Invasoren!
14 Ende des Szenarios
Mine is from Spieleschmiede as well, so either there are 2 versions or you looked somewhere else
@@aenima ah my First Szenario card is called Verteidigung der Basis
Seems Like These are two scenarios called one and two
@@ImAuftragDesBrettspielgotts i just checked every card, i don't have a "Verteidigung der Basis" card...it's such a shame when such a great game is dragged down by production/translation mistakes 😔
49:26 german Invasion Board says : move roundmarker
This is not the best translation (it works very similar to the English version) thank you for pointing this out. We had to fix this in the reprint and create stickers for current owners so you can play it as it was intended. But as said in 99% of cases you will shift the last event only so the result will be the same.