BMR Suspension Install - 2016-2024 Camaro SS
HTML-код
- Опубликовано: 27 авг 2024
- Looking to upgrade your suspension on your 6th Gen SS, 1LE, ZL1, etc. Check out this install guide that covers the entire rear setup.
Product Link:
➤ BMR Rear Toe Rod: bit.ly/2q3qWVm
➤ BMR Rear Lower Trailing Arm: bit.ly/2qMUCFt
➤ BMR Rear Upper Control Arm: bit.ly/2qNhqoJ
➤ BMR Rear Upper Trailing Arms: bit.ly/2rJbBqb
➤ BMR Driveshaft Tunnel Brace: bit.ly/2rtOanD
➤ BMR Lowering Springs: bit.ly/2rILlw6
➤ BMR Sway Bars w/ Bushings Front and Rear: bit.ly/2qP9UYx
➤ BMR Sway Bar End Links: bit.ly/2qNfmwI
Note: Products provided by BMR & Phastek Performance for review and overview. Install and labor completed and paid for by myself and Red Barn Racing.
Subscribe:
➤ Hit this link to SUBSCRIBE and support the channel bit.ly/1Up8Mnd
Lethal Garage Store! (Support the Channel)
➤ Store Link: bit.ly/2rJLrCo
Lethal Garage Synthetics!
➤ Use the same AMSOIL oil I trust: bit.ly/2wR2xFL
Codes from Sponsors!
➤ Save 5% on select products via Phastek Performance by using LETHAL5 at checkout - bit.ly/2g7Cmix
➤ Save 5% on all ZL1addon parts and accessories with coupon code lethal5 - bit.ly/2gCQBzg
Mail Box:
Lethal Garage
31915 Rancho California Rd ste. 200-444
Temecula, CA 92591
Social Media & Other Accounts!
➤ Official Instagram Page: / lethal_camaro
➤ Official Twitter Page: / lethal_camaro
➤ Official Website: www.lethalgarag...
➤ Official Facebook: / lethalcamaro
#Suspension #BMR #RearSuspension
Music:
Song: Oneeva - Platform 9 [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Oneeva - Platform 9 | ...
Follow Oneeva
SoundCloud - / oneeva
Facebook - / oneevaofficial
Twitter - / oneevaofficial
Videos always come in handy, ima do the sway bar, drive tunnel brace, and toe rods one of these weekends
The arms are fine, it's all the flex in the bushings that causes wheel hop.
+Grajeda it's more than bushings. The amount of vibration that comes through the car is crazy. Also I can bend them in Half without trying
A note to viewers. When adjusting endlink heights, the heights of stock links are for stock height cars so if your car is lowered, the new endlinks need to be shorter. End links should be neutral adjusted with the driver in the car so there is no preload on the sway bay. Preload is sometimes needed if drag racing and the car launches and puts weight on one side more than the other and makes the car pull uneven or traction is uneven. Sway bars need tuned to be optimal for understeer and oversteer thus the adjustable holes in the bars.
You should mention that when ur going to tighten the sway bar the car has to be at its resting position not in the air. Great video and I like how ur friend helping u is into Camaros and Snap-On Tools.
All bolts are checked and recheck once it was on the alignment rack. (elevated, but int he resting position)
LethalGarage yeah I figured once it was aligned everything thing would be checked. Cause it was a great tutorial video it's just I was seeing it through a mechanic's eyes and that's the only thing that I would have added, but it's a great video.
I just got a chance to see this video and this is my point about buying a base model because look at that beautiful set-up. GM isn't giving that kind of rigid greatness with adjustable setup as well. By the way I just noticed we got everything done in the braking department except vented rotors. Plus they complement the wheels as always so don't forget those. Love this car and still waiting for my doe to come but I am very thankful for your channel and work you done so I know exactly what to do. Love you broski. Ahh ohhh forget about it the IROC-Z! LOL
Yes I saw that. Thank you for your reply.
The control arms are made to crumple in an accident also so that the cradle doesn't sustain damage and you can replace the arms much easier than the whole rear end. That said I am still considering the same with my car.
BMR looks great in red !!!
It does :)
I'm a 6th gen SS owner myself, and your car is awesome but the money you've put into it. Why not just go with a ZL1? I'm sure you've gotten this question before.
Isiah Thomas because after spending a lot on zl1, u have no money for mods. Mods is an addiction, it's not about money
The reason I dont have a ZL1 is i didnt want that kind of a payment. I work Over time to pay for mods. cant depend on it.
Built, not bought :)
Isiah Thomas just be thankful he didn't. You won't find a better channel for your car.
People ask me that too, but being that I'm 21 with no credit history I won't get approved for that kind of loan lol
Looks sweet can't wait to see if any improvement !!! Also where can I get a Mike the assistant?! Lol
The music in this video reminds me of the game Portal
I really want to hear about the C7Carbon products you teased us about a while back.
Awesome vids. keep it up. I have a 2016 2ss convertible. I need to figure out how to purchase your merchandise. Thanks venom2ss
What do you think about SPL ?
Any clunks from new suspension?
Great Vid Leath!
Looks like Mikey is a Snap On fanboy.
His CT8850 3/8 cordless impact and long reach 80 tooth bent handle ratchet (FHBF80) are great choices.
I also love the big set of wall mounted Snap on wire cutters it is an awesome decorative addition to any garage.
And the matching Snap On floor mat is a nice touch as well.
Are you going to offer suspension cleaning tips in a new video soon?
Wat about the front because the shop told me my front control arms was kind of loose and I will need new ones soon ‘ where can I buy front control arms?
when you upgraded to almost full bmr setup. did your camaro become a rougher ride? i was looking into getting it but im hearing people telling me it becomes very hard on the road as thought it becomes more track only.
It will get a rougher ride but nit a whole lot worse.
The big thing that causes a rougher ride are coilover suspensions.
Old video, new subscriber"........ what was the report on any performance improvements? Negatives with ride? Looked for a review video but didn't find one
I just ordered all the same parts
I hope you reply soon lol, is the outer jam nut closer to tires silver or gold. Im trying to see what direction to install toe rods. One jam nut is gold, the other is silver.
Why does no one talk about the windshield fogging up on the 6 gen c as mero? They all do it. The hatch dont close all the way to the defroster and cold air constantly blows on the windshield causing condensation....
Because in California I don’t have that issue
And the verdict is?
Shocks and springs, then sway bars, .......and then suspension locating arms. I'm sure those R888's with stock shocks are putting your bump stops through their paces.
+ralph ford I have Mag-ride
Super Kool!!
My installer said that I had to replace all the bolts for the rear control arms and trailing arms since they are torque specific or couldn't be reused. He gave me a bag of bolts after install. I am not sure if that was just overkill or what? Looks like you used the same bolts. BMR didn't mention that anywhere in their instructions, or include them in the boxes.
I didn't seem to run into any torque on yield bolts.
Nice car and certainly nice mods! Would be nice, understanding a lot of your parts are gifts, to have a price tag to the mod you get? Continu making this car awsome
Only a few parts were gifts, 95% of my parts have been paid for. What cost are you looking for?
Hey Matt, does it come as one part number or do you have to order it in prices?
All the parts are listed in the description.
any update/reviews after?
im thinking about getting the 1LE kit from GM with the MRC tuning or should I do BMR. I had a full BMR suspension on my 12 SS and loved it. What about the cradle bushings on the 6th gen. On the 5th I had BMR delrin and they made the biggest improvement to the car of any mod.
I haven't done the front parts just yet.
The stock susp have to calibrate or not?
did any of this lower your 60' times?
I love it very good
Your posthaste discount code stopped working
It only works on certain products or on products that are not already discounted.
Ohh fersure man, thanks!
I like Mike. He has a Texas flag in his garage.
+Mark Shermer Mike is a Texan
Aren't you running on eibach springs?.. I want lower my 19 1le. Should I go with bmr springs or eibach???..
I was a long time ago. back on stock springs.
Did you get the chassis brace? I just got mine in and it won't fit due to the locking dif module being in the way.
I have the tunnel brace.
Does BMR have a solid mount kit for the differential? If they do are you going to replace the rubber bushing mounts with solid ones? if not may I ask why? Thanks. Also who is Mike?
I am only swapping the main upper and lowers and sway bars. I am not looking to swap the stock bushings. No need at this point.
great thanks. How is the ProCharger coming
Hey could you drive with e100 without damage with the flexfuel system you had before the procharger? Or is e85 maximum
You would have to get a tune for it.
Hello, do you have contact to your mechanic? I am looking for someone who can tell me if it is possible to swap manual transmissio for 10 speed auto. Your guy seems to have knowledge for this. Thanks. Rudolf
You mentioned how you think there so cheap but isn't that the fun of modifying your car?
+Ryan E. yup
think its worth it to wait for the 2018 2ss or just get a 2017
Gavin Trettel depends might be a minor face lift and that new car price tag and 2016 and 2017 will be cheaper by than to
+Gavin Trettel They are the same. 17s will see deep discounts in a few months
Are bmrs better than magentic ride
Not sure you understand what magride is with this question. BMR parts are springs and control arms etc. magride is a tech within the shock.
@@Lethalgarage Ahhh i see, can you buy shocks that have magnetic ride? And install them on a lt1?
cool
I'm guessing Cunningham had you take down that other video eh ;)
Video is still live: ruclips.net/video/pqwXeSIYryw/видео.html
Cool hope you don't have any more issues with it going forward man.
MAT , THERE IS A CONDITION KNOWN AS OBSESSIVE COMPULSIVE AUTOMOBILE MODIFICATION ADDICTION DISORDER SYNDROME ! OCAMADS ! LOL LOL LOL
yup.
thomas halikas thats sounds crazy. Never heard of it.
>>adds 200hp in forced induction without suspension upgrades
>>bitches about wheel hop from stock suspension not designed for the hp...
I never 'bitched' about wheel hop, but many manual drivers do.
Those parts should be made out of carbon fiber.
So you can pay 5x more for a little weight savings and still possible vibrations.
Hey it would look cooler though. ;)
Don’t go through no mud😂