BEYBLADE FULL METAL TWISTED TEMPO... With a rubber "twist"?
HTML-код
- Опубликовано: 12 сен 2024
- Beyblade FULL METAL Twisted Tempo that I had made a while back, wanted to showcase it finally and also see what happens if we make the wheel with rubber?
Hope you like it!
Get one from my store before:
Store link: benchblade.store/
Instagram: / bench_blade
#Beyblade #metalfightbeyblade #Twistedtempo #Driger #heavymetalsystem
#Grevolution #BeybladeWolborg #DrigerV #msuv #Dragonbeyblade
#beybladeburstevolution #beyblades #beybladehms #beybladeburst #toy #dragoonmsuv #dragoonms #dragoon
#toys #dranzer #dranzerhms #beybladeburstsuperking #dracielms #custom #3Dprint #dragon #metalfightbeyblade #ベイブレード #ベイブレードバースト #BenchBlade #トライピオ #battle #warzone
I think you should use plastic WD, spin stealing works better on lower weight beys and even that one part may change alot + I think metal WD is just not really that good to use. LF was a really bad choice to use, It works on meteo Ldrago only because he has that dragon claws and Rubber Twisted has literally no recoil. Tho overall its a good video
Thank you for the suggestion! I figured that's where I went wrong. I'm going to try a few more combos. Feel free to suggest something
@@benchblade maybe SA145WD?
@@benchblade it could work as Wizard Fafnir
@@benchblade full metal BD would be funny but imagine the noise it would make
@@benchblade 1:30 How much for you to make me a Fusion Wheel with no weak spot?
Should of tried launching it spinning clockwise. Rubber contact points are 20x stronger than solid surface contact points. Super fun to watch
Spin time is extremely bonkers. Beyond my expectations!
Don't forget to use the rubber! Haha lol
Shut Up Kid
Good joke 😁 but not the best place
I’m dying 😐
@@amvretro5341 that's fair
Ah yes the gomu gomu no tempo
(Now I want to see a full rubber version)
it'd be really interesting to see you make your own custom beyblade system to put various and and new beys into ngl
"Ay bro whats the time"
"Holup lemme check , 3 2 1..."
the one nice thing you now have is something to test the full metal versions of the plastic gen ones against
I seriously want the metal WD tip! This is awesome!
Some bootleg beyblade did sell them at some point.
I have one of them and like 5 metal b tip.
Same for full metal screw.
The prospect of rubber fusion wheels is hilarious to me!
Awesome work man!
Full metal twisted tempo with ultimate free spinning metal bearing of phantom orien would be the strongest bey in history ever
I have tried it and it's OP for sure
yeah and imagine that with full metal diablo wheel.
the rubber basically makes it absorb attacks nice
That og Twisted Tempo moves like an attack bey.
WD must be very worn.
No it's because the fusion wheel is unbalanced by default wich gives it the movement.
my twisted tempo literally acts like tornado stoler xDDD
even why I use literally brand new WD from Hasbro Byxis
Just learned abt the bench blade channel and im all for it 🔥
Thank you!!
In terms of ways you could improve Tempo’s overall performance, here are two suggestions I have:
1. Switch out the metal Spin Track and Performance Tip for a plastic Spin Track (D125 should work well here) and the EWD (Eternal Wide Defense) Performance Tip. It’s got a free-spinning gimmick similar to B:D, and is good for both LAD and Spin Stealing.
2. Maybe consider adding some of the metal back into the Fusion Wheel (specifically on the zig-zagging edges) via co-molding?
The biggest problem with an all-rubber Fusion Wheel is that because it’s made out of a material that is relatively easy to deform, a lot of the Bey’s stamina is gonna be wasted trying to compensate for the vibrations that occur when the rubber Fusion Wheel tries to spin at high RPM.
Adding some metal back in would act like a metal brace, stabilizing the Bey and reducing the amount of stamina wasted on those vibrations (especially with the help of D125 and EWD).
Thank you! I'll try this out for sure!
Awesome music choice Bro love ur vids
Thank you! I appreciate it!
This is amazing, how do you even make rubber pieces like that?
Hello, i was wondering if you would make the storm and dark metal wheel designs from the boxes, i noticed the storm wheel wasn't supposed to be that flat and the dark wheel was supposed to have bigger gaps. If you do please test them vs the original released counterparts.
Edit just search for the dark wolf box and storm pegasus box and see the different designs from the front of them compared to the release.
Not just that but the buttom of dark and thermal and a bunch of fusion wheels are hollow if that was filled in they would be heavier and just straight up better and with the heightened recoil from bigger gaps dark would go from decent to an amazing wheel
Hello there! I am glad you also noticed this difference. I am not much bothered about Storm wheel, but Dark wheel always caught my attention with regards to the difference in actual and box design.
How about you try a synchrome system bey? Just a thought
Maybe spin your runber bey in the intended durection via launcher? I think this may, instead of enabling spin steal, give him the roll of a spin killer that just stops every attack dead in its tracks
can you make a full metal Storm Capricorn it would be dope to see it battle against nemisis.
I am your big fan I like metal and burst beys .
Because I have not watched the 1 series of beyblade so i don't know about these beyblades.
i used to have a twisted tempo as a kid,it survived a 15 floor drop and continued winning matches unril breaking a year later
I forgot that i'd seen this custom before, and at first I though replacing the only metal would nerf it until i took another look.
The animes always show engineering and modding work on beyblades.
People have to design their own parts for the game, for the game of spinning tops to evolve beyond the consumerism promoted by Beyblade product lines.
Put the rubber wheel on a left spin Beyblade and change that left spin Beyblade's performance tip to B:D
That would be a hack lol
So satisfying to see 😍
Glad you think so!
@@benchblade how can I get this full metal beayblade?
Alternative title- when Full metal twisted tempo goes on a diet
A Full Metal Phantom Orion would be a beast then.
Is there is Full metal Hades Kerbecs there
Hey man i have only seen this video of uou but i already love you you're style is just so different and i love it keep up the work man
Thank you! I'm glad you think that! Will do!
I don't know if anyone has mentioned this yet, and it's likely someone has, but technically a fully rubber fusion wheel is actually worse for spin steal when the beyblades are moving in the same way, as the spin steal comes from the beyblade damaging the opponents bey by going the other direction and taking momentum that it uses to increase it's own spin via the rubber.
I think the full metal with rubber fusion wheel could do much better against anyone else but the problem with using it against Phantom Orion is that it’s tip BD free spins so spin stealing doesn’t work as effectively against it as good as anyone else. Other than that I believe it would be really good. Also another problem with spin stealing is that it doesn’t really “steal” spin, it “equalizes” their spin, so if you keep making contact with the foe until the end it would all come down to who has better LAD, but I believe that can be used for advantage with another tip with better LAD. Though, the extremely low weight might be a bit of a problem that way…
This is perfection, it shall be called ultimate twisted tempo
you should use d125, ed125 etc types to stop the rubber from touching the stadium floor during the final few seconds
Try Eternal Wide Defense from Evil Befall, it has the LAD of wide defense, and the free spinning spike from libra that allows for extended stamina and stability, then i think if you go against Phantom orion you want something a little taller, maybe like 145?
You should use rubber tempo with B:D with the metal face and energy ring. Cracked stamina, low weight, LAD, and freespinning??? match made in heaven
If you can make a steel hulk like this one you should create tryhorn
Fun fact: You ended up with the same fake meteo that I did. The big give away was the extra tall LF. Another thing is the clear wheel doesn't fit the metal wheel the way it should (extra space between the metal jaw and the rubber).
It has no LAD because the rubber spin track has to much friction, so you need to change the middle piece to something that would make contact with the stadium instead of the spin track
This man is living in 3000 w the modded DB launcher
Adding the bearing drive from Orion will increase it stamina to a next level
Make all full metal beys compete video to choose who 's the best
This was an interesting plot TWIST
LOL nice pun
Honestly after Beyblade X they should kind of go back to the Metal fusion style beyblades but make the gimmick where all the plastic parts are now metal and totally make the metal wheels rubber.
Rubber against rubber would be cool because it'd be a lot of bouncing
Beyblades are also supposed to be toys in real life, it would be too dangerous as full on metal objects for kids.
A costume made Arena would be awesome
Bro you made my dream real, always wanted to do that since 2010, is it doable the same thing with tungsten ?
Bro has the ultimate bey to destroy the whole bey series💀💀💀
Pls do a remodel of POISON wheel where its hollow area around the 15 blades is filled from lower side
I think ik what's the issue with your combo. It's the fusion wheel, it's too light and unstable. Even tho being made completely out of rubber gives it better area for absorption but due to lack of metal at certain parts it's momentum becomes unstable and the energy isn't spread out evenly.
I watched the whole video and I saw twisted tempo shake a lot, which is a sign it lacks stability on the outer side of beyblade. May be try to make a new rubber wheel with some metal parts to balance it. It'll make it last longer in spin steal battles. Reason why meteo Ldrago is the best spin stealer is because it has balance between weight and absorption. Copy those elements to achieve maximum results
this dude just casually pulled out a metal fight sparking launcher
XD
That's not a beyblade, it's a weapon of mass destruction
I am curious, how did you make the rubber? Or rather, what type of rubber is that? I am planning on making custom parts for a model kit and I need go make rubber parts for that.
Thank you very much!
I am quite curious too.
Metal Twisted Tempo vs Storm Capricorn.
I think that it would be the only way to knock it off
that could spin steal so well omg
Cool
Use w2d with rubber wheel
Do you happen to have 3d models for the beys? I would like to 3d print one
The Rubber wheel puts too much weight in the center.
When combined with the Metal Energy Ring this makes the whole Bey top heavy and topple easily when low on stamina.
Best parts to be metal for stamina and LAD would be Performance Tip, Spin Track, and unsurprisingly the Fusion Wheel.
Cool stadium
You should do flash segitario tall spin track rubber
Bro if spin it into the left rotation it can actually spin steal so try to do tha like L drago does
Crazy how long it went with a hand spin
you should test it as an attack type
It steals velocity rather than just speed
Maybe try to use softer rubber, if its to hard in cant absorb as well
U should use BD with metal inside and rubber out
not bad!
I wanna buy it
What should we call this Tempo? Gomu Temop?
Full support brother
Wouldn't spin stealing only work if the other bey was spinning left?
They need to make Fullmetal beys the new bayblade generation
Oh God.
Hey there im new to this channel. I wanted to know whether you sell the products you make?
Yes store link in description
The more heavier the bey the more u win
How would a battle be when Rubber Twisted Tempo fights against Phantom Orion in right spin?
Try it with B:D just to see what happens.
Make a full metal blitz unicorno and flame sagittario
Did you sell these bayblade
Sorry, ¿ how do you make the Ruber????
Using industrial manufacturing
is that full metal beyblade made out of the same material they use to make official beyblades
It's made of stainless steel which is much stronger than original metal parts that were made of zinc.
@@benchblade awesome thank you
Do the illegal combo with Diablo and this. For sure over 100g
It's around 155 grams I tried it
Super
you should have it verse Diablo nemsis
Could you tell me the name of instrumental song in video
Rubber wheel could be good against attack types
When you printed the rubber twisted wheel you should have flipped it so you could use it on left spin Beyblades
try making it an attack type using rf or something
nice song, whats it called?
Bearing drive is a very stronger
How much offer you will give on black Friday sale on dragoon msuv
Pls do it a full metal orion
Fullmetal tempo + Fullmetal nemesis = 💀
Yes it definitely is!
How you made the steel fusion wheel?
I would of tried a EWD or plastic WD
Vanish fafnir is quiet at this point
Full rubber tempo
The metal parts make the bey stamina lower