Jeff gosh you shift that truck sooooo sweet. You come back into the power so gentle. Many drivers just mash the go pedal. You drive like you own it!!!!
O' ICWeld reminds me of an old fella on the N.Slop, when I was just knee high to a tall assed Indian. To my amazement I saw him drew an arc on a wooden flatbed ... my jaw dropped, he laughed and pointed out what he was welding on was the top of a six inch strip of I-beam. Dang and I thought I had met God for a second.
No emissions laws for off road in Aus They figured to import our gear as tier 2 from factory Cause everyone was going to dodgy brothers to get it removed and stuffing up a load of stuff with dodgy retunes a d refit Then trying to get warranty when it stuffs up
Hi, looking at your torque multiplier reminded me of the assembly tightness required on the quarter segments on bolting up everything with special nuts and bolts on rolls Royce Industrial gas turbine casings on stages 1 and 2. made from cast MULTIMET coming in at over 2 tons but weighing just less than 1 ton after i finish machined them, the bolts needed a double barrelled 6 foot long torque wrench with a lump of scaffold tube on it done up to 1600 foot pounds torque.... Without the long tube, I`m no lightweight but hanging on the torque wrench just never got it to click- lol so, the scaffold tube was in fact a torque multiplier I guess - lol good video, thank you - Ian - uk.
First your a brave man wearing short cuff gloves cutting steel.. I've jumped around getting them off before. Not a favorite past time. And second I love hearing a CAT sound like a Screaming Jimmy with the fast forward..
First torque multiplier I used was on R model Mack rear springs the boss had me heat those u bolts up cherry red then torque to 700 ft lbs ashe bolts cooled you sure could here those springs coming together lol
I purchased a torque multiplier from Amazon and it is amazing my wife can crack the duals on a 300 hp JD or the tires on my road tractor. Hard to believe but it works this has no cheater pipes,you would like it. Also less than $100.00 I paid 60 5 years ago including a variety of sockets
Thanks for the video. I agree with you, those rock structures are quite effective. I've seen them work very well, although the "sidewalk superintendents" informed me I was installing them backwards....lol.
My friend just got a brandy new Cat 390, I think it is the FL, excavator and he said that it doesn’t have enough counter weight on it too. I’ll have to go and run it a bit to see if he knows what he is doing.
If the 336E is going into regen often and is due the 5000hr spark plug change then it will also need the DPF cleaning or a reman fitted. We look after a BZY prefix for a customer. It now has over 10000 hrs and with the recommended maintenance has been pretty much trouble free.
@@Jpaydirt Are you expecting it to fail? There were some problems with the coolers about 10 years ago caused by debris from the exhaust manifolds but your machine should be new enough not to be affected.
Double-tempo Cat C-15 always reminds me of the best-sounding engine ever: Detroit 6-71. It’d take a lot longer to get home in a needle-nose Kenny with one of those under the hood though 😊
Just asking question, when you change BOLT is it better on drive system like you do or when track is half way through machine, where there's more room, is it becouse it easier to TORQUE on drive sprocket like you do, just for my learning, you help me so much, wish I could come see you sometime, give you my body to abuse anyway you see fit. Gosh I could learn so much more from you, the GRADER part about how to properly grade a gravel road and more importantly the LARGE rocks that couse problems with the pull out of material. Thank you for videos thay are great Learning experiences.
🦜au few a shots of Gasoline in the tank looks like rum & one for the driver 🥃 Someone needs to send you some Aussie Redgum some harden like steel if burnt 70s we had a big 3ft stump near the garage used for chopin & hammerin things into submission good workbench the house sign rep 4 binden/ harris thats fked up 😅
FOR HATS AND SWAG GO HERE!----->www.jpaydirt.com/ OLD KENNY COLORING BOOKS------> amazon.com/Old-Kenny-Semi-Truck-Coloring-Book/dp/1724398199/ref=sr_1_1?ie=UTF8&qid=1533523771&sr=8-1&keywords=old+kenny+coloring+book JPAYDIRT ON INSTAGRAM------->instagram.com/jpaydirt/ JPAYDIRT ON FACEBOOK------>facebook.com/Jpaydirt/ HELP A VETERAN, SHANE PERSONS C/O ruclips.net/video/iHeH5cl7JGo/видео.html ANDERSON CONSTRUCTION 858 WEST 100 SOUTH BLACKFOOT ID 83221
Poor ol' Murray creaks like an outhouse door. Is 3+3 axles ok with 330 on? The bird migrates to uk after 15th Sept. It has no legs, called the Oomigooly Bird, lands in sagebrush and calls out "Oo...." you know the rest.
by the way, when you use the oxy to cut metal, the OXYGEN is in effect erroding it away!!, the heat allows this process to hapen like in chemistry lessons, the heat provides the energy for the reaction to occur, it is the added oxy (from the big lever on the tip, NOT the other knob, this just controls the amount of oxygen allowed through the "main jets", the basic mix controls on the main handle control the flame colour (reducing/normal/oxydising) through the "pre-heat" jets), you can demonstrate this by shutting the flame off, and just adding the oxygen from the lever, the metal still is cutting:-)
I’m surprised the bolt don’t break or strip while you were using the torque multiplier! Must be USA hardened steel bolts! China quality steel strips easy! Pot metal!
Must be a mighty tiny recreational cutting torch to have taken that long before you could cut that bolt. 15-20 seconds tops, not a minute plus to cut a bolt that size. You should invest in a professional cutting torch. You'll use a little less acteline and save time. You might try using a hotter flame, too. I "been there done that" as an on location/in the field fabrication welder, and heavy equipment (mostly cranes, car crushers, and articulated end loaders) mechanic back in the 1970's.
I love/hate my torque multiplier, when you need it you need it. That stupid sign kept me up half last night. Where did they get it? Had to have picked up that out and out lie from the Biden campaign . . .
How bout now? Tanking economy, Being laughed at by the rest of the world, record high fuel and with that grocery prices hurting families who can least afford it. Highest inflation in decades. Remember what obama said. "under my plan energy prices would necessarily skyrocket.". biden continues this war on petrol even though we are decades away from "green energy" taking over. biden voters should be paying $10 for a gallon of gas, a loaf of bread or a dozen eggs, so those of us that didn't could still be paying what we did with Trump.
Republicans for Biden-Harryass? Very strange indeed. When I used to work for the railroad there was a coal burning power station that we serviced. During the spring/summer months the speed limit was '3 mph' for several miles for some particular dragon fly. And year round had to use engines from the 1950s because they had drip pans built in, they kept them around just for this move. Yah know, spotted owl stuff!
Hey Jeff you should have put on you hooded sweat shirt and mask and ripped the Biden - Harris sign out of the ground and set it on Fire and told every body you are just protesting it is your right.
Mister Jay paydirt sir I would have been absolutely livid, over the letter that they sent you back. If it was me I would take a copy of both letters and notes and send it back to them trying to make sure that only the president or CEO of the company Reed's all of it together. This is the problem with big companies is emails to many different people and everything in this world gets effed up because of the way things are done. The head man in the head man only can truly is the only one that can make the decision with all the facts. In your cover letter tell him what you're pissed about and I would say I'm more pissed off about caterpillar not listening to my concerns then I am a spending $120,000 for a machinist Tippy it's going to hurt the resale value. And then to add insult to injury you do not listen to my concerns. Tell him that you have it RUclips channel and what it is and that you had mentioned and showed the letters on RUclips and you had fans answer back get when you buy a new caterpillar machine the expected to be engineered and that includes putting a proper counterweight on or not selling the extended boom and Dipper without making sure the right counter way it was on that is what the expect from Caterpillar is an engineered machine from front to back. And when caterpillar gets back in touch with me I will tell all my fans what the outcome was or if you still don't give a damn. Tell them that you would like a sit-down meeting at their expense to talk about this subject. And if they don't want to do that extending the new machine won't warranty on the said machine would be too little too late but at least since the machine is Miss Matched the counterweight and the extended Gipper and boom do do not following your own engineering specs and putting on a heavier counterweight I'd be covered for another year hey some trouble shows up. I'm not telling you what to do I'm just saying that's what I would do I am hopping at their response which wasn't even a Band-Aid to the problem that they did not listen to you and sent the response that they did unexcusable. Keep up the great great videos I love them I love them all I retired Excavating contractor and I'm still pissed at the moment caterpillar not for anything in the past having to do with me but with the total disconnect they showed you which also means that they disrespected you and feel that you're small gaiam and can be a chump for them. Actually I don't think they thought of you is a chump it's just a disconnect the request came from the finance company so the finance company was the one that sent the pre thought postcard which covers the finance company's problems but it never got passed on to the people it in engineering or dealerships or the president of the company and the quality of engineering that goes into these machines for a dealer to absolutely ruin the Machine by doing what they did is absolutely unexcusable. I'm going to go out and buy a lottery ticket right now it's got your name on it and if I win I'm going to buy all your equipment Parker side by side or how the circles go around I'm going to burn the whole the whole bunch of it because it says caterpillar on the name and then I'm going to go out and buy you a piece of new some other brand every piece LOL I'm fantasizing now thanks ldr
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Jeff gosh you shift that truck sooooo sweet. You come back into the power so gentle. Many drivers just mash the go pedal. You drive like you own it!!!!
I C Weld does some very good work.
Throwing rocks in the river sounds like fun.
Good thing I do not have you 2 as friends.
O' ICWeld reminds me of an old fella on the N.Slop, when I was just knee high to a tall assed Indian. To my amazement I saw him drew an arc on a wooden flatbed ... my jaw dropped, he laughed and pointed out what he was welding on was the top of a six inch strip of I-beam. Dang and I thought I had met God for a second.
Some serious torque needed on those bolts! Great video as usual! 👍👍👍👍👍
No emissions laws for off road in Aus
They figured to import our gear as tier 2 from factory
Cause everyone was going to dodgy brothers to get it removed and stuffing up a load of stuff with dodgy retunes a d refit
Then trying to get warranty when it stuffs up
Hi, looking at your torque multiplier reminded me of the assembly tightness required on the quarter segments on bolting up everything with special nuts and bolts on rolls Royce Industrial gas turbine casings on stages 1 and 2. made from cast MULTIMET coming in at over 2 tons but weighing just less than 1 ton after i finish machined them, the bolts needed a double barrelled 6 foot long torque wrench with a lump of scaffold tube on it done up to 1600 foot pounds torque.... Without the long tube, I`m no lightweight but hanging on the torque wrench just never got it to click- lol so, the scaffold tube was in fact a torque multiplier I guess - lol good video, thank you - Ian - uk.
I love the end. Like an in car camera in a racecar
thanks Jeff, I love the "race truck" mode.
Track bolts are usually torque turn and torqued lubed with oil. Radius edges on the nuts against the rail for forging irregularity.
Great Video love your Videos keep up your great work man i love caterpillar wrenching Video much respect from Patrick 👍👍
When you fast forward the video that CAT sounds like a screaming Jimmy lol ...keep up the good work awesome job
First your a brave man wearing short cuff gloves cutting steel.. I've jumped around getting them off before. Not a favorite past time.
And second I love hearing a CAT sound like a Screaming Jimmy with the fast forward..
I bet your neighbors love your jake brake! Thanks for the laugh on the bent pipe joke!
I love hearing the Kenworth go through the gears!
First torque multiplier I used was on R model Mack rear springs the boss had me heat those u bolts up cherry red then torque to 700 ft lbs ashe bolts cooled you sure could here those springs coming together lol
The new entrance gates look good but are still a little hard to see. Try some reflective paint?
This video makes my week!! Hallelujah Humpday!!
I GOT A TORQUE MULTIPLIER LIKE YOURS AND LOVE IT!!
ESPECIALLY WHEN USING A TORQUE WRENCH!!
I purchased a torque multiplier from Amazon and it is amazing my wife can crack the duals on a 300 hp JD or the tires on my road tractor. Hard to believe but it works this has no cheater pipes,you would like it. Also less than $100.00 I paid 60 5 years ago including a variety of sockets
Thanks for the video.
I agree with you, those rock structures are quite effective. I've seen them work very well, although the "sidewalk superintendents" informed me I was installing them backwards....lol.
I actually visited family that lives in Midvale Idaho and we went on a boat on the snake river through Hells Canyon.
Thanks for sharing Jeff
My friend just got a brandy new Cat 390, I think it is the FL, excavator and he said that it doesn’t have enough counter weight on it too. I’ll have to go and run it a bit to see if he knows what he is doing.
One thing you can do to stop the regens is run full throttle more often. If you run at three quarter it can't get the dpf hot enough.
No trash cans were harmed in the making of this video.😄
You beat to it lol.
Are you sure? The camera was mounted on the driver’s side! 😊
I was counting them, and thinking 'you'll need to move a bit closer to tag them Jeff'.
I was sure that black wheelie bin turned white though
@@adriannettlefold9084 lol.
If the 336E is going into regen often and is due the 5000hr spark plug change then it will also need the DPF cleaning or a reman fitted. We look after a BZY prefix for a customer. It now has over 10000 hrs and with the recommended maintenance has been pretty much trouble free.
Ya we havn't had any trouble yet, but I did order a new EGR cooler before it fails
@@Jpaydirt Are you expecting it to fail? There were some problems with the coolers about 10 years ago caused by debris from the exhaust manifolds but your machine should be new enough not to be affected.
I C Weld, he is master with a torch! Great video young man!
you gotta idle your equipment at a higher rpm and the def system wont have to regen so much the emissions system is mostly used at idle
Double-tempo Cat C-15 always reminds me of the best-sounding engine ever: Detroit 6-71. It’d take a lot longer to get home in a needle-nose Kenny with one of those under the hood though 😊
I need a sign like that. So I can put my sticky target on it. Hahahaha. That sign is Methed up.
Changing that hydraulic filter on the 336 makes one hell of a mess of hydraulic oil
Mr Murray didn't sound too happy this morning with his breakfast of rice krispies.
Go go gadget Detroit diesel! Lol love the fast play sound
Very nice video, thank you.
Working on hydraulic all my life and a multiplayer is the one tool i relied on most
On the Mississippi we call those barbs “wing dams”.
How's the fishing in the Snake River? Excellent video Jeff.
Have you looked at those hydraulic tighteners?
Thks jeff I finally got to see a bidden Harris sign ,we dont see em down here
Just asking question, when you change BOLT is it better on drive system like you do or when track is half way through machine, where there's more room, is it becouse it easier to TORQUE
on drive sprocket like you do, just for my learning, you help me so much, wish I could come see you sometime, give you my body to abuse anyway you see fit. Gosh I could learn so much more from you, the GRADER part about how to properly grade a gravel road
and more importantly the LARGE rocks that couse problems with the pull out of material. Thank you for videos thay are great Learning experiences.
A little grease would be nice when trying to torque those bolts, but it would attract dirt pretty bad. Six of one, half a dozen of the other. LOL
Good old MBTA avoidance measures!
🦜au few a shots of Gasoline in the tank looks like rum & one for the driver 🥃
Someone needs to send you some Aussie Redgum some harden like steel if burnt
70s we had a big 3ft stump near the garage used for chopin & hammerin things into submission
good workbench the house sign rep 4 binden/ harris thats fked up 😅
If you stick a pry bar in between the nut and rail it’ll save you finger from a pinch
Sweet kicks into 12v 71 mode on ole ken jr at 19:55
Spark plugs! Oh Jeff, don't forget the blinker fluid while you're at it!
Jake must be used to it from Jeff. He didn't crack his face.
Make sure you make a vidja about this lil project mr anderson!!!!
unlike sleepy Joe I am up early this morning watching your new video.
Always fun to watch. Really enjoy that part of Idaho. Just curious , how much torque were applying to bolts?
Go Geoff go !
Damn right! 🤘🤘🤘
Did the broom make it home. 😁
Jeff used the invisible chain and binder setup in conjunction with the Velcro bristles. LOL
Dang bird schedules!!
Is a barb different than a wing dam?
17:12 Got the map link handy? Oh and at 8:05 the cheater didn't get a woody, it got a bendy :-)
That was a custom bend so it fit his hand better. LOL
www.google.com/maps/@43.182,-112.40132,588m/data=!3m1!1e3
are you going to offer hoodies soon? ol' man winter is right around the corner....
FOR HATS AND SWAG GO HERE!----->www.jpaydirt.com/
OLD KENNY COLORING BOOKS------> amazon.com/Old-Kenny-Semi-Truck-Coloring-Book/dp/1724398199/ref=sr_1_1?ie=UTF8&qid=1533523771&sr=8-1&keywords=old+kenny+coloring+book
JPAYDIRT ON INSTAGRAM------->instagram.com/jpaydirt/
JPAYDIRT ON FACEBOOK------>facebook.com/Jpaydirt/
HELP A VETERAN, SHANE PERSONS C/O ruclips.net/video/iHeH5cl7JGo/видео.html
ANDERSON CONSTRUCTION
858 WEST 100 SOUTH
BLACKFOOT ID 83221
Mr Paydirt
What's the difference between a jetty and a barb ? Are you going to use the loader to move the rocks closer to the excavator?
Poor ol' Murray creaks like an outhouse door.
Is 3+3 axles ok with 330 on? The bird migrates to uk after 15th Sept. It has no legs, called the Oomigooly Bird, lands in sagebrush and calls out "Oo...." you know the rest.
More foreplay before the applying the heat.
Right on
When did you put a jimmy in the KW?
by the way, when you use the oxy to cut metal, the OXYGEN is in effect erroding it away!!, the heat allows this process to hapen like in chemistry lessons, the heat provides the energy for the reaction to occur, it is the added oxy (from the big lever on the tip, NOT the other knob, this just controls the amount of oxygen allowed through the "main jets", the basic mix controls on the main handle control the flame colour (reducing/normal/oxydising) through the "pre-heat" jets), you can demonstrate this by shutting the flame off, and just adding the oxygen from the lever, the metal still is cutting:-)
Where’s ur merch page?
pinned comment has the link, also theres a icon at the top of the page next to the facebood and instagram icons
Glen Ghilotti is looking down and smiling..........
Good sign.
Just wanted to know why you don't use a tag axle when pulling heavy load never hear you say anything about it before thank tom
I’m surprised the bolt don’t break or strip while you were using the torque multiplier! Must be USA hardened steel bolts! China quality steel strips easy! Pot metal!
david Cinelli Probably grade ten stuff. Cat does use quality bolts.
Is that multiplyer a 4X?
Speak to TorcUp.... the battery torque guns are impressive and save a lot of time an effort
I snapped the sheer pin on the torque multiplier trying to take counter weight bolts of excavator. Time for plan C.
Slugger wrench and a sledgehammer. The original impact wrench
Hmmm team ghilotti shirt?? I'm from Sonoma county. You must of known Glenn
yes I did, great human being!
Jpaydirt small world!!
all those rubbish bins are on the wrong side for you to score a hit or few.
Ya, I was thinking the same thing! Then I thought well, with 500lbs of hoses in his own toter, he already was near the top of the gman's poop list!
How many likes to get a new Talbert trailer?
Nice!!!!!!
are the bolts too long or are your nuts too short????
I was so disappointed when I didn't get to see a trash can get hit.
I love you 2stroke
Hay hay J your bolts are not to long. Your nuts are not big enough.
Do the men who work with you also have YT channels?
A few of us had this conversation on the last video, one is his boy. His "assets" thinking they don't like the camera
Wow. When you speed up the vid your KW sounds like it's got a Jimmy in it. Horrors.
Must be a mighty tiny recreational cutting torch to have taken that long before you could cut that bolt.
15-20 seconds tops, not a minute plus to cut a bolt that size.
You should invest in a professional cutting torch. You'll use a little less acteline and save time.
You might try using a hotter flame, too.
I "been there done that" as an on location/in the field fabrication welder, and heavy equipment (mostly cranes, car crushers, and articulated end loaders) mechanic back in the 1970's.
RINOS in your area for higher taxes and the joke is on them !
i myself like my Hytorq gun
The Biden sign blew me away
#Jpaydirt you are my hero.lol
oops forgot to get rid of the ads.............gone
Your are the only one that removes the ads. YT wants to replace TV starting with the ads.
Personally, I don't mind watching ads to support good quality content like yours. Keep rockin' 'Dirt!
should be sleeping but hey
“Republicans for Biden/Harris that’s messed up” Lmao my stomach hurts so good...
I think thats a fake scheme from the left just my opinion
I love/hate my torque multiplier, when you need it you need it.
That stupid sign kept me up half last night. Where did they get it? Had to have picked up that out and out lie from the Biden campaign . . .
Republicans for the other team? Are they escapes from CA ?
FIRST LIKE!!
Why I’m a republican for Biden. Good for that farmer.
How bout now? Tanking economy, Being laughed at by the rest of the world, record high fuel and with that grocery prices hurting families who can least afford it. Highest inflation in decades.
Remember what obama said. "under my plan energy prices would necessarily skyrocket.".
biden continues this war on petrol even though we are decades away from "green energy" taking over.
biden voters should be paying $10 for a gallon of gas, a loaf of bread or a dozen eggs, so those of us that didn't could still be paying what we did with Trump.
Republicans for Biden-Harryass? Very strange indeed. When I used to work for the railroad there was a coal burning power station that we serviced. During the spring/summer months the speed limit was '3 mph' for several miles for some particular dragon fly. And year round had to use engines from the 1950s because they had drip pans built in, they kept them around just for this move. Yah know, spotted owl stuff!
I wanna see how well you can skip rock's with that machine. And I gotta say that's the only Biden sign I've seen.
Looks a lot like those Burn Loot and Murder signs too.. probably the same anarchist print shop
Hey Jeff you should have put on you hooded sweat shirt and mask and ripped the Biden - Harris sign out of the ground and set it on Fire and told every body you are just protesting it is your right.
Americans for Trump.
Mister Jay paydirt sir I would have been absolutely livid, over the letter that they sent you back. If it was me I would take a copy of both letters and notes and send it back to them trying to make sure that only the president or CEO of the company Reed's all of it together. This is the problem with big companies is emails to many different people and everything in this world gets effed up because of the way things are done. The head man in the head man only can truly is the only one that can make the decision with all the facts. In your cover letter tell him what you're pissed about and I would say I'm more pissed off about caterpillar not listening to my concerns then I am a spending $120,000 for a machinist Tippy it's going to hurt the resale value. And then to add insult to injury you do not listen to my concerns. Tell him that you have it RUclips channel and what it is and that you had mentioned and showed the letters on RUclips and you had fans answer back get when you buy a new caterpillar machine the expected to be engineered and that includes putting a proper counterweight on or not selling the extended boom and Dipper without making sure the right counter way it was on that is what the expect from Caterpillar is an engineered machine from front to back. And when caterpillar gets back in touch with me I will tell all my fans what the outcome was or if you still don't give a damn. Tell them that you would like a sit-down meeting at their expense to talk about this subject. And if they don't want to do that extending the new machine won't warranty on the said machine would be too little too late but at least since the machine is Miss Matched the counterweight and the extended Gipper and boom do do not following your own engineering specs and putting on a heavier counterweight I'd be covered for another year hey some trouble shows up. I'm not telling you what to do I'm just saying that's what I would do I am hopping at their response which wasn't even a Band-Aid to the problem that they did not listen to you and sent the response that they did unexcusable. Keep up the great great videos I love them I love them all I retired Excavating contractor and I'm still pissed at the moment caterpillar not for anything in the past having to do with me but with the total disconnect they showed you which also means that they disrespected you and feel that you're small gaiam and can be a chump for them. Actually I don't think they thought of you is a chump it's just a disconnect the request came from the finance company so the finance company was the one that sent the pre thought postcard which covers the finance company's problems but it never got passed on to the people it in engineering or dealerships or the president of the company and the quality of engineering that goes into these machines for a dealer to absolutely ruin the Machine by doing what they did is absolutely unexcusable. I'm going to go out and buy a lottery ticket right now it's got your name on it and if I win I'm going to buy all your equipment Parker side by side or how the circles go around I'm going to burn the whole the whole bunch of it because it says caterpillar on the name and then I'm going to go out and buy you a piece of new some other brand every piece LOL I'm fantasizing now thanks ldr
19:18 Moderate Democrat for Trump 2020!
Who’s the dink’s with the thumbs down
Ed Meyers the republican for Biden/ Harris 👎🏿