Hola! Si tengo una guitarra con acabado negro glossy, cuantas veces tendría que pulirlo para pasar la capa de color? Tengo que pasar una capa de blanco primero?
No entiendo muy bien la pregunta que haces. Creo que te refieres a hacer un proceso de repintado en una guitarra negro glossy. En nuestro canal tienes un vídeo de ese mismo proceso, en una guitarra amarilla, pero el proceso es el mismo.
Buenas, si compro un kit que ya tiene pore filler aplicado... ¿Hace falta que lije antes de empezar a aplicar la primera lata de vuestro producto o no es necesario?
Hola, lijar es recomendable pero no obligatorio. Si la superficie ya está lisa y sin imperfecciones no es obligatorio lijar. Sin embargo, lijando mejorarás la adherencia de la capa de pintura o barniz que pongas después.
Just to help people out that will do this. It's my first time painting a guitar with aerosol spray cans but I'm doing it very carefully. With 1 Spray Can I'm only able to do 3 good Coats, I'm not able to do 4. And with 3 coats only when you sand it, even carefully, with P800 the last layer will start to show up, so when you sand the Primer the wood starts to show up, when you san the Color the Primer starts to show up. So I had to buy one extra can of primer and 1 extra can of Color. So for now I have 2 cans of Primer, 2 cans of Color and 2 cans of Clear Coat. Nitorlack recomends 2 cans of Primer, 1 can of color and 1 can of clear coat, I advise you against that, it's not enough. Also most of the places recomend more coats of clear coat from 8 to 12 coats and not 4 coats as Nitorlack recommends. Having done this I recomend you to use grain filler (even in Alder wood, do it always, and sand it very well before the primer), 2 cans of Primer, 2 cans of Color and 3 cans of Clear Coat. This way you don't risk removing any layer when you sand it
when advising costumers we always recommend use 2 cans of each spray, although if you are used to spray painting you can also get a good result with 2 primers, 1 color and 1 finish, but if, it is better to use more product. It is also important to know you have used grain filler, because if you have used grain filler you will need less spray cans.
@@nitorlackguitarcoatings9546 Hi, thank you so much for your reply. I used Grain Filler. But even with Grain filler, only 1 can of primer and 1 can of color is not enough, at least for me. With 1 can I can only do 3 coats, and when you sand the primer the wood will start to show um at some places, the same with color, when you sand the primer starts to show at some places. I sand lightly with P800. What I’ve found is that I needed at least 2 cans of primer and 2 cans of color, specially if it’s the first time painting a guitar. Thanks
Hola, a que pasta te refieres? Si te refieres a la primera color marrón, se trata de un tapaporos. Puedes encontrarlo en la web con el nombre de "GRAIN FILLER" Si te refieres a la pasta negra del final, se trata del producto " RELIC PATINA". Ambos estan disponibles en el apartado accesorios.
Al meterla al congelador, la madera se contrae levemente y en este barniz se producen grietas. Después se rellenan esas grietas con relic patina, que es una pasta base agua, que no daña la nitrocelulosa y que rellena las grietas haciendo así que se marquen más. No obstante esta fase final de cuarteo y relleno de grietas es opcional y se hace solo si quieres conseguir un toque vintage a la guitarra.
Si eres capaz de optimizar bien cada spray, y usas tapaporos antes de comenzar a usar el spray, te bastaría con uno de cada. (fondo + color + acabado) Si es de tus primeras veces pintando te recomiendo 2 de cada, o al menos 2 en el fondo y en el color.
If you apply the grain filler after to apply the primer, and then you use a translucid color, you will mark the wood grain of the wood. If you want to see how to make this type of process visit "TV YELLOW PROCESS" video.
Exelente trabajo
Después de la nitrocelusosa debo poner laca?
Gostaria de vê, a pintura chorme... Guitarra Joe Satriani, ibanes.
Hola! Si tengo una guitarra con acabado negro glossy, cuantas veces tendría que pulirlo para pasar la capa de color? Tengo que pasar una capa de blanco primero?
No entiendo muy bien la pregunta que haces. Creo que te refieres a hacer un proceso de repintado en una guitarra negro glossy.
En nuestro canal tienes un vídeo de ese mismo proceso, en una guitarra amarilla, pero el proceso es el mismo.
Hola amigo excelente vídeo , utilizasteis los productos en orden. Asi como los escribiste en el texto?
Buenas, si compro un kit que ya tiene pore filler aplicado... ¿Hace falta que lije antes de empezar a aplicar la primera lata de vuestro producto o no es necesario?
Hola, lijar es recomendable pero no obligatorio.
Si la superficie ya está lisa y sin imperfecciones no es obligatorio lijar. Sin embargo, lijando mejorarás la adherencia de la capa de pintura o barniz que pongas después.
Me gusto el color que le pusiste, que color es?
Hola.haceis trabajos de pintura?
Just to help people out that will do this. It's my first time painting a guitar with aerosol spray cans but I'm doing it very carefully. With 1 Spray Can I'm only able to do 3 good Coats, I'm not able to do 4. And with 3 coats only when you sand it, even carefully, with P800 the last layer will start to show up, so when you sand the Primer the wood starts to show up, when you san the Color the Primer starts to show up. So I had to buy one extra can of primer and 1 extra can of Color. So for now I have 2 cans of Primer, 2 cans of Color and 2 cans of Clear Coat. Nitorlack recomends 2 cans of Primer, 1 can of color and 1 can of clear coat, I advise you against that, it's not enough. Also most of the places recomend more coats of clear coat from 8 to 12 coats and not 4 coats as Nitorlack recommends. Having done this I recomend you to use grain filler (even in Alder wood, do it always, and sand it very well before the primer), 2 cans of Primer, 2 cans of Color and 3 cans of Clear Coat. This way you don't risk removing any layer when you sand it
when advising costumers we always recommend use 2 cans of each spray, although if you are used to spray painting you can also get a good result with 2 primers, 1 color and 1 finish, but if, it is better to use more product.
It is also important to know you have used grain filler, because if you have used grain filler you will need less spray cans.
@@nitorlackguitarcoatings9546 Hi, thank you so much for your reply. I used Grain Filler. But even with Grain filler, only 1 can of primer and 1 can of color is not enough, at least for me. With 1 can I can only do 3 coats, and when you sand the primer the wood will start to show um at some places, the same with color, when you sand the primer starts to show at some places. I sand lightly with P800. What I’ve found is that I needed at least 2 cans of primer and 2 cans of color, specially if it’s the first time painting a guitar. Thanks
Disculpa amigo, si tengo una sg con acabado cherry natural, la puedo barnizar para que tenga un acabado brilloso??
Hola, puedes barnizar la guitarra con un Lacquer Gloss para conseguir un acabado brillo.
Disculpa, que es la pastita que le colocas?, los link de la descripcion no quieren abrir
Hola, a que pasta te refieres?
Si te refieres a la primera color marrón, se trata de un tapaporos. Puedes encontrarlo en la web con el nombre de "GRAIN FILLER"
Si te refieres a la pasta negra del final, se trata del producto " RELIC PATINA".
Ambos estan disponibles en el apartado accesorios.
Hola! Para qué se mete al congelador y se le pone el aceitito después?
Al meterla al congelador, la madera se contrae levemente y en este barniz se producen grietas.
Después se rellenan esas grietas con relic patina, que es una pasta base agua, que no daña la nitrocelulosa y que rellena las grietas haciendo así que se marquen más.
No obstante esta fase final de cuarteo y relleno de grietas es opcional y se hace solo si quieres conseguir un toque vintage a la guitarra.
Hola, cuántos botes de pintura y primer necesitasteis para ese resultado?? Gracias de antemano
Si eres capaz de optimizar bien cada spray, y usas tapaporos antes de comenzar a usar el spray, te bastaría con uno de cada. (fondo + color + acabado)
Si es de tus primeras veces pintando te recomiendo 2 de cada, o al menos 2 en el fondo y en el color.
Está es una azs?
Niñooooo! Que hace la merluza fuera del congelador??
Anyone can explain the difference to use grain filler before or after the primer?
If you apply the grain filler after to apply the primer, and then you use a translucid color, you will mark the wood grain of the wood. If you want to see how to make this type of process visit "TV YELLOW PROCESS" video.
Ok it’s clear. But i’ve the last problem… I can’t see the grain filler on our website 😅 i find primer and color but no filler😅 can you help me?
@@RedCloud5150 you can see this product in the main menu: products > accesories > grain filler
Creo que quedo peor a como estaba antes xD
DE DONDE SACAMOS EL CONGELADOR
Tengo 3 en casa nen.
Why not make these videos in English - your company would explode
What do you mean? The video is in English