How to recover a horn and a horn wrap

Поделиться
HTML-код
  • Опубликовано: 29 ноя 2024

Комментарии • 30

  • @rockingw123
    @rockingw123 Год назад +3

    You are not charging near enough. The quality of your work is very good. I was surprised at how good the video was to.

  • @KerNalClayPuLL
    @KerNalClayPuLL 2 месяца назад

    You remind me of of my dad teaching me how to hang and finish drywall. Now I know this is not a class on drywall , but it is a class on a trade that you have knowledge about. My dad always told never ignore advice or a technique or tip when working along side anyone in the same trade. Not all advice or tips or tricks are good , as time goes on youll get better at figuring that out. All that matters as long as the end result of your work is what the customer wanted.
    And of course to make the most money at as possible getting the best result faster than any other contenders. .. not only the best product gets the check sometimes the first one standing there to pick that check up is the customers choice to get the at job done

  • @gibsonleather5835
    @gibsonleather5835 3 месяца назад

    Matt's an awesome instructor. This was outstanding.

  • @johnearhart8811
    @johnearhart8811 Год назад +2

    You are working to cheap in my estimation. May I ask what head knife youvare using?
    Thanks for the video!!!

  • @ginaminor9848
    @ginaminor9848 Год назад

    I appreciate these videos. Would love to see a cantle binding on a seat replacement. I took off the cantle binding & it tore. I’ve got to make a new one 😢

  • @errolpoxleitner7901
    @errolpoxleitner7901 10 месяцев назад

    You did a beautiful job.

  • @tinoyb9294
    @tinoyb9294 Год назад

    Lots of cool techniques in this one! Subscribed!

  • @Andrew-xx4ht
    @Andrew-xx4ht Год назад

    Fantastic job!
    How can you instead recover/rebuild the braided rawhide cover?

  • @DocCaudill
    @DocCaudill 11 месяцев назад

    I would like to know where your from. I have two saddles that needs the horn done on them. You done amazing job

  • @robertbruunpatriciafordsal2780

    Love the work and video one question what is the pattern you used to cu😅t the three pieces to build the horn cover

  • @jordanchavez1312
    @jordanchavez1312 9 месяцев назад

    What I’ve done is epoxy and rivet a wooden filler piece to the top of the metal horn and that way I have something I can nail the leather too before putting my top piece on

  • @TheLeatherLadyLLC
    @TheLeatherLadyLLC 5 месяцев назад

    I have never seen that Hook & awl Needle ( at16:03 minutes) I have looked on Weaver ahd Leather Wranglers and cannot find it... is there a specific name they use for it? I have had a repair, restoration, manufacturing & Piece work business since 2002 and this would speed things up a lot ... and yes Time is Money.. :) Great video .. good job! The Leather Lady, LLC (I have a RUclips channel too) and love teaching as well. :)

    • @connectwithillume
      @connectwithillume  4 месяца назад +1

      Matt says he uses a Groz-Beckert needle and he does get them from Weaver. Sorry he sent me a picture so I'll do my best copying the info 1155 N.R. 175 American Shoe No. 6 HN 84/57.175.23 G 1 I'll post the picture he sent in the FREE RESOURCES section of our free online community that you can access here: www.learnwithillume.com/communities/Q29tbXVuaXR5LTI1NzA5/spaces/Q29tbXVuaXR5U3BhY2UtODQ4OTc=/

    • @connectwithillume
      @connectwithillume  4 месяца назад

      We also got this link from another Illume Community Member www.springfieldleather.com/Needle-Jerk-Size-6

  • @ReneFuentes-jd8py
    @ReneFuentes-jd8py 10 месяцев назад

    La dirección trabaja muy bien
    Amigo

  • @gilbertojimenez4224
    @gilbertojimenez4224 6 месяцев назад

    Hi Sr, I would like that you recommend me a nice set of tools to buy for my fathers birthday he is a craftman too and he lives in Cuba and those kind of tools dont exist there, and I like to buy a good decent set of draw tools to give him as gift,thank you in advance.

    • @connectwithillume
      @connectwithillume  4 месяца назад

      Bruce Johnson Tools may be a good resource. It sounds like you are looking for a draw gauge? From what I've heard the old ones were really nice. Bruce Johnson refurbishes the old tools.

    • @gilbertojimenez4224
      @gilbertojimenez4224 4 месяца назад

      @@connectwithillume thank you

  • @ilanacheiban5795
    @ilanacheiban5795 8 месяцев назад

    your awl from leather wranglers... what are the size and blade length that you think works best?

    • @connectwithillume
      @connectwithillume  8 месяцев назад

      1.75" is the length of my awl. The width is the same no matter what length you order from Leather Wrangler

  • @lauriheffington6323
    @lauriheffington6323 7 месяцев назад

    I'm having a really hard time finding a saddle with a short enough horn ... Is there a way to shorten them if they aren't metal?

    • @connectwithillume
      @connectwithillume  7 месяцев назад

      Matt said, "No. You need to talk to the tree maker to get a tree built with your specs on horn measurements."

  • @valeriebeaudoin5020
    @valeriebeaudoin5020 Год назад

    I can't find that hook/stitching awl from Weaver. Do you have a link?

  • @TexHoss1
    @TexHoss1 Год назад +1

    If you're like me, that little dot was the first mistake you ever made & you're still waiting to make you 2nd. LOL. Easy fix for it as you showed everyone. You need to charge more as you are not paying yourself enough for these days & times.

  • @1977Mappy
    @1977Mappy 9 месяцев назад

    Great content, thanks for sharing.

  • @garrett6371
    @garrett6371 11 месяцев назад

    That was great.

  • @juliangonzales2916
    @juliangonzales2916 Год назад

    Excelente👍👍👍

  • @outfitr9703
    @outfitr9703 Год назад +3

    I think you work too cheap.

  • @JohnTBlock
    @JohnTBlock 7 месяцев назад

    Man, talk about distracting! Soooo many guys im seeing lately in hats that look like they're wearing them BACKWARDS, DUDE!!! WTH!