Followed this video and broke every clip on the lid , watched again paused and zoomed when he turned over the lid and noticed all his plastic clips are also broken, a warning at the start of the video would have been nice.
Top cover cannot be dispatched from the device without breaking clips. To not breaking the cover itself, use plastic or wooden spatula, put it inside near the clip and gently push it, but with force. AFter fixing what you wanted to fix, just put the cover in place and remember it's not holding in place. Thermal glue is an option as well - top part is not heating during work and glue wouldn't melt.
I recreated those clip tops that broke off with heat glue gun. In case that won't work due to heat melting the glue, then I'll use my son's 3D printing pen which uses sturdier plastic filaments. I don't have it handy. Also, using thermal glue you can just cover sides of the broken incomplete clips to make them thicker and the glue surface will add friction to hold it in place firmer than without it.
@@TadasLaur ok! 😄 I don’t know if it is worth me taking mine apart. The screen stopped working which means it is guesswork when you try to set the temperature and time. Part of me thinks it could be a loose connector between the screen and the main board, but probably if I take it apart I will break the lid and then discover the screen needs to be replaced, which I can’t do without a spare part which I can’t buy anywhere.. So less than 18 months after buying this thing it is junk
Hello, great video that will be of great help to me, I have to check a coworker's machine with E1 error, turn the machine off and on and the error disappears, sometimes doing it several times, according to the little documentation that there is on the internet, It is a failure of the thermal sensor, can you please tell me if you have encountered this problem and if it is directly the sensor or a problem on the PCB
Hola en tu vídeo dices que han realizado una modificación la empresa, yo acabo de ver este vídeo en cámara lenta en el segundo 0.36, también sele rompe las 5 seguridades, últimamente los electrodomésticos estan desechables y no se dan cuenta de la contaminación que esto provoca, saludos desde Barcelona España
I think the "shafts" of mine arent locking the basket in place properly when I insert it in the airfryer. I have to smash the basket inside the airfryer in order for the shafts to "lock" the basket and the airfryer start the heating. Any idea on how to fix that?
Visited my parents and found this crap present unused. Turned out the fan never worked. Disassembled and broke the clips of course. Found the fan windings are not good. Open circuit from Neutral blue to high/low speed wires:(
Followed this video and broke every clip on the lid , watched again paused and zoomed when he turned over the lid and noticed all his plastic clips are also broken, a warning at the start of the video would have been nice.
It's a quick disassembling quick guide afterall. 😂
Thanks for showing us the proper way to destroy the top lid 👏🏻 I should have read the comments first 🤦🏼♂️
Top cover cannot be dispatched from the device without breaking clips. To not breaking the cover itself, use plastic or wooden spatula, put it inside near the clip and gently push it, but with force. AFter fixing what you wanted to fix, just put the cover in place and remember it's not holding in place. Thermal glue is an option as well - top part is not heating during work and glue wouldn't melt.
I recreated those clip tops that broke off with heat glue gun. In case that won't work due to heat melting the glue, then I'll use my son's 3D printing pen which uses sturdier plastic filaments. I don't have it handy. Also, using thermal glue you can just cover sides of the broken incomplete clips to make them thicker and the glue surface will add friction to hold it in place firmer than without it.
[🛑WARNING] My top lid is broken following this guide
Mee too.I broken 5 plastic clips holding the top cover when tried to remove it. You should bend the cover inward to release the holding clips
@@vanngocao1131 I thought so, too. Nope. That way it's easy to break the lid itself because it's very thin.
good job, your top cover is broken 🤣👍
After ko buksan saka ko nakita comment mo. Ayun sira. 😀
What is the correct way to remove the lid without breaking it?
@@PVflying still don't know 😅
@@TadasLaur ok! 😄 I don’t know if it is worth me taking mine apart. The screen stopped working which means it is guesswork when you try to set the temperature and time. Part of me thinks it could be a loose connector between the screen and the main board, but probably if I take it apart I will break the lid and then discover the screen needs to be replaced, which I can’t do without a spare part which I can’t buy anywhere..
So less than 18 months after buying this thing it is junk
@@PVflying yes it could be pure contact, so its posible to fix. I always braking top lid, then using super glue to mount it back 🤣
How to destroy the top cover quick guide , that’s the proper name for this video
Hello, great video that will be of great help to me, I have to check a coworker's machine with E1 error, turn the machine off and on and the error disappears, sometimes doing it several times, according to the little documentation that there is on the internet, It is a failure of the thermal sensor, can you please tell me if you have encountered this problem and if it is directly the sensor or a problem on the PCB
Hola en tu vídeo dices que han realizado una modificación la empresa, yo acabo de ver este vídeo en cámara lenta en el segundo 0.36, también sele rompe las 5 seguridades, últimamente los electrodomésticos estan desechables y no se dan cuenta de la contaminación que esto provoca, saludos desde Barcelona España
@@silviagarciamendoza-demon Muchas gracias por indicarlo.
Sir, is it possible to remove only metal mesh ?
I think the "shafts" of mine arent locking the basket in place properly when I insert it in the airfryer. I have to smash the basket inside the airfryer in order for the shafts to "lock" the basket and the airfryer start the heating. Any idea on how to fix that?
where can I buy a new heating pipe?
How to remove the top cover, i can not do it😢 do you need special tool for that or is there a secret combination of moves? 😅
Angielski
I damaged the cover. It is set very firmly. In the video, the ends of the hooks are probably broken off?
@@V1RUS-nx4tc me too, i just broke the lid of😁 but while i was breaking it I thought that i am opening it properly 😅
Mine has a problem with the rotor. It stops spinning after 1-2 mins.
Visited my parents and found this crap present unused. Turned out the fan never worked. Disassembled and broke the clips of course. Found the fan windings are not good. Open circuit from Neutral blue to high/low speed wires:(
How to remove air outlet? I try it but..
It's so hard
Misleading way of removing the top lead.
Top cover is broken even i used the same tools. Dont follow this video.
Broke all the rivets!🤬
Look like this is not the same model. The cliplock at 4 corner cannot push or pull to unlock
Fraud. It is impossible to dismantle the cover so quickly. The hooks are strong. And they often break when dismantled.