I just did a mod on my stock mufflers on my 21 bob, decided I'd give some 258 Thunder Torque Inserts a shot. Welp if you measure back an inch from the end of the muffler, make a clean cut, the baffle slides right out. The 1" baffle tube has a plug in the middle which is why you can't see through the muffler. Once the TTI's are installed, the mufflers do just as good a job even with the cats still intact, not to mention a legal exhaust. Besides Thunder Torque Inserts are only $50.
Thanks for sharing! I have a 2022 street bob and haven't decided which slip ons to go with. Those sound good. I would like to see what happens If you remove the baffles and install those thundertorque inserts. It would probably be too loud, but I don't care.
@eduardyoc1287 look up ball Allen head set on Amazon thanks again for watching this video. If you can please suscribe to my channel I will really appreciate it
Sounds good. I just got a 22 street bob as well. There seems to be debate if you need a tune with the slip on. Do you have a tune? If not how does it run?
it runs really good im surprised that it does not loose power its actually very fast, try them with out the tunner if need be have it tuned i did tune my 2020 heritage with the screaming eagle .RIDE SAFE BROTHER
Thanks brother, very informative and straightforward. Gonna get a set of slip ons for my dyna, much easier than pulling the entire exhaust off of the motor. How much did these slip ons cost?
Gamala enjoyed watching your video slip on change out. I just got my 2022 Softail Street Bob with the Orange tank badge. I'm going to do a slip on change out. Where you from con respecto🫡
Thea are ordered for 2022 softail fro Dennis kirk .exactly the same as for my 2020 Heritage 114 only difference is these are black thanks for watching this video
I don't understand what you mean by busshing. However I did use antisieze on the pipe and slip ons. Thanks for watching this video if you can please subscribe to my channel I will really appreciate it
Thank you for all the information.
@@SPMiller thanks for watching this video I appreciate you if you can please suscribe to my channel I will really appreciate it
The before sound reminded me of daffodils blowing in the breeze.😂😂😂
Haha thank you for watching this video I appreciate you
Just learned how to take them off. I need to change the brake pads but need to take the pipes off. Good video you made it look easy👍🏽
Thank you for watching this video I appreciate you
Thank you for watching this video I appreciate you
I just did a mod on my stock mufflers on my 21 bob, decided I'd give some 258 Thunder Torque Inserts a shot. Welp if you measure back an inch from the end of the muffler, make a clean cut, the baffle slides right out. The 1" baffle tube has a plug in the middle which is why you can't see through the muffler. Once the TTI's are installed, the mufflers do just as good a job even with the cats still intact, not to mention a legal exhaust. Besides Thunder Torque Inserts are only $50.
Awsome information thank you for watching this video I appreciate you
What did you do with the oxygen sensors from the stock exhaust when you put the eliminators on
@@mistermisters4854 those do not need to be touched just rhe slip ons got replaced thanks for watching this video I appreciate you
Thanks for sharing! I have a 2022 street bob and haven't decided which slip ons to go with. Those sound good. I would like to see what happens If you remove the baffles and install those thundertorque inserts. It would probably be too loud, but I don't care.
Thanks for watching this video if you can please subscribe to my channel I will really appreciate it thanks...LOUD PIPES SAVES LIVES
Sounds great, get any kind of tune? How many times louder compared to stock exhaust?
Thanks buddy, cool how-to guide. What seat do you have on the Bob?
ruclips.net/video/e_Fpt0Klq04/видео.html I have sadelman solo and drag specialties full seat thanks for watching this video I appreciate you
What did you use to take the two screws on the top pipe? It’s a pain . Looks like you took off easy
I use ball end Allen wrenches.. thank you for watching this video I appreciate you
@@GAMALA194 oh snap thanks for replying so fast !
@@GAMALA194 don’t suppose you have a link to buy one like yours ?
@eduardyoc1287 look up ball Allen head set on Amazon thanks again for watching this video. If you can please suscribe to my channel I will really appreciate it
Sounds good. I just got a 22 street bob as well. There seems to be debate if you need a tune with the slip on. Do you have a tune? If not how does it run?
it runs really good im surprised that it does not loose power its actually very fast, try them with out the tunner if need be have it tuned i did tune my 2020 heritage with the screaming eagle .RIDE SAFE BROTHER
Good Vlog.
I got '21' model.
10 inch sharkroad slupons.
Buggar all pipes or parts you our model
Thank you for watching this video I appreciate you
Thanks brother, very informative and straightforward. Gonna get a set of slip ons for my dyna, much easier than pulling the entire exhaust off of the motor. How much did these slip ons cost?
Thanks for watching this video I appreciate you they are about 450.00
Gamala enjoyed watching your video slip on change out. I just got my 2022 Softail Street Bob with the Orange tank badge. I'm going to do a slip on change out. Where you from con respecto🫡
I'm in San Diego hermano let's ride
I used to live in Oceanside, North County ~ Now I live near Yosemite @@GAMALA194
What size are those .. I have 2022 street bob and I like the sound it gave with the slip on .. and where did you get them from ..
Thea are ordered for 2022 softail fro Dennis kirk .exactly the same as for my 2020 Heritage 114 only difference is these are black thanks for watching this video
Did you have to tune it?
Did you not have to put bushings on the mufflers? I seen the old ones had them in the ends when you removed them.
I don't understand what you mean by busshing. However I did use antisieze on the pipe and slip ons. Thanks for watching this video if you can please subscribe to my channel I will really appreciate it
G'day mate I'm from Australia I like ya seat not a fan on bike colour but hey your bike. Can ya tell me the name of the seat please.
What was that you put on your exhaust? Anazee spelt it wrong.
Anti-Seize. thanks for watching this video I appreciate you
Sounds great...not too loud?
Not to loud and sounds really good I also have them on my 2020 Heritage 114
Are these California legal?
Yes sir