6kwp solar energy with 10.2kw lfp battery in Nigeria!.
HTML-код
- Опубликовано: 6 сен 2024
- for this installation, we used 12units of 500w monocrystalline half cut solar panels,
we did a paraseries connection for the panels.
2 units of 2.1kw lifepo4 making total of 10,
#solarenergy #solarsystem #monocrystalline #mpptchargecontroller #solaruk #diy
Good presentation. However, the wattage ratings of panels were obtained under standard test conditions (STC), which include a cell temperature of 25 degrees Celsius, a particular mass airflow and 1000 watts per square metre of direct (perpendicular ) sunlight. In other words, it is challenging to replicate these conditions in the real world. Hence, under ideal conditions (panels facing south at the location latitude and a sunny but cool day), one can get 70-80% of the rating depending on the panel's efficiency. So, a 6kwp system might produce between 4.2 and 4.8kw on a good day during peak sunhours, usually between 11am and 3pm in Nigeria. Occasionally, the production might momentarily spike above these values. Understanding this concept and explaining it to potential owners is essential so they don't later accuse you if they don't see 6 kw being produced from their panels.
🙏🙏, well explained
Good explanation. The mass airflow is at 1.5.
My 180W X6 panels facing south at my roof in Kano have recorded a peak of 627W around 12 noon on Friday 1st March 2024. The charge controller is Epever Tracer series. That was impressive generation.
Well explain
@@auwaluabdullahi8183 I am in maiduguri and I get results because in the north the sun shines well. The only issue is the 7 weeks of the hot season when charging is slower because its so hot.
Epever is original charger control @@auwaluabdullahi8183
I came to this page all the way from tiktok, can you please drop a video on how to connect the input and output of AC current in an inverter to the load of the building.
You sound like a professor; your lecture is clear and straightforward.
🙏🙏
Very neat set-up, looks good.
Thanks!
Like how u took the time to explain this. I now have a better understanding on how it works.
You are really a good teacher. Thank you
Good content, but at 70% efficiency on a very good day, this panels will produce a total of about 25 to 26kwp per day.
Good video.
🙏🙏
Nice job
Nice one
Good job
I think those panels should produce up to 180amps of load if converted by the mppt. So how will 100amps take all those current. Hope you made your calculations on this?
Nah, two in series, you would generate 78amps.
Though I later remove two panels
Can i use additional charge controller together with a hybrid inverter which has a charge controller already?
Because I want to add some mismatch panels to my system.
Please advise.
Thanks
What do you think about the all in one off grid batteries coming out of late?. I'm interested in getting a 10kw+10kwh battery.
Thanks for the tutorial. Please how did you connect the solar panels, series or parallel for me to know the voltage and amperage input from them to the charge controller sir. Also please explain more of the pro and cons of both series and parallel connection of panels
Connecting the batteries in series to produce 48v seems more logical. Good video.
Great content. In this setup, how long can the batteries carry the full load of the house. I often see these videos that state all appliances in the home can work simultaneously but no mention is ever made about how long this lasts. One would hope for a system that carries the building's normal load all night and then some, to accomodate for a cloudy day when batteries may struggle to recharge. Would you comment on this please
The hours the battery will deliver depends on the amount of energy consumption.
For this very installation in the video and the amount of load we suggested, takes them about 30-35hrs
@@Mairigaemmanuel how much will this same system cost, excluding the installation?
This configuration serves the this very home 24/7
Mine own out put use to carry refrigerator and electric kettle but now it can’t again please can you help me with a solution
What error does it show you?
@@Mairigaemmanuel it didn’t show any error code
Yes 🙌 good job
Thank you
Correct guy
🙏🙏
If you had expected 60 to 70 amp from your PV input then how come the charge controller is giving output of 90-100amp. And then if you meant the PV input that came from the solar array is now 90-100 amp would it not affect the charge controller over time been that its equipped with 100 amp max.
now that nigerians are getting wise, I say to hell with NEPA!!
How much is the 10kva set up of this installation?
That's good presentation. What kind of batteries are those. I only know Lithium batteries. Can you please share the name of the batteries. Great job.
Lithium.
Those are yohako brand
Pls what brands of pure sine wave inverters are the best for 3.5kva
how much is this please
How much would this same system cost today with the current economic condition in Nigeria?
5.5m
Why solar priority not grid priority poor grid supply in that area??
Nope, cause the panels are sufficient and by doing that the electricity bill will be reduced by 50 or 70%
Please where can we get this type of battery and inverter. From festac town Lagos.
Pls give me a good product of 200 watts solar panel. Original not one they have used sticker to change
Can you share the contact details of Yohako products. The supplier in China or etc.
I wanted to ask why 3 converter and how many batteries watt with this 12 solar panels
It's 1 inverter 2 batteries
How did you connect the solar panels sir all in series, parallel or series parallel
Hello Sir.
Please can sunlight damage 16mm solar cable at the roof?
Yeah, it causes rust in the cable
@Mairigaemmanuel I'm not asking about the cable inside.
I'm asking could sunlight damage the coating?
@@Good-dh3nx nope
Good evening sir, please I want to learn from you physical
Fhow much for rural 2 story house
Please, how do I get in contact with this engineer?
Reach out to me on WhatsApp; +2348187663361
Why didn't you set it as grid priority or its and offgrid system
Cause the panels are very sufficient
@masudsaleh5155 the battery bank serves at night
How much does it cost both the set and the installation ?
5.2m
Merry Christmas , please the load capacity
3800w
That is 50% efficiency of solar array
How much does it cost to install it
How much is 10kwh of this battery
These lithium batteries have no reviews on the Internet. Are the only for the Nigerian market?
I guess
Yea, yo are right
PLEASE ARE YOU IN DELTA STATE
What if the battery spoil how much will it cost??
It comes with 5 years warranty.
And when it spoils I can't tell the cost for repairs until a proper check is done
Hi how much did it cost to setup this installation
5.1m
Confirm video
Is this a transformer based inverter?
Transformer base
@masudsaleh5155 not really
How much is the complete set
4.7m
Can It power
3Acs
1washing machine,
1 deep freezer and 1 water dispenser,
1 microwave,
85inches TV and 2000w sound system,
Electric Blender
At thesame time?
No sir
@@pharztv6049 All these things at the same time. Calm down 😂
You too like violence
😂😂😂@@huncho193
Why 24v
Why not go for 48v
Cause the put out same energy
@masudsaleh5155how?
I watch the video till ended but there is no price
5m
That is very nice but how many batteries
@@icecool9429 1