It's easy to paint fast... but that won't work on a level 5 smooth wall... and you will be getting paint everywhere... won't be a clean job roller marks everywhere I guarantee...
It's not that hard with no furniture in the way. Watch out for roller marks, though. I can't tell you how many bad paint and spackle jobs I've seen done by "professionals".
This guy is probably either using a broken 1 1/4 inch nap or a new 3/4 inch which would be very bad on smooth walls, because it would leave a very strong texture from using an app that size, no matter how far you stretch that paint and plus those walls probably been painted more than a dozen times so I know there’s possibly a text from them already. The next couple videos I produce on my channel are going to be the best snaps to use on walls and ceilings in the sizes
Would ya believe paint occasionally drips, being a liquid and all. But thankfully painters are exceptional at cleaning up any inevitable drips. You jealous bell end
I think you literally did it faster than a sprayer could. I'm glad to see your roller finally get light in torwards the end of each wall. Lol. Was starting to think you had some supernatural powers keeping the roller full of paint in your other videos lol
Aint going to lie.... regardless he painted a whole upstairs in 8 mins.... even if he applied a 2nd coat to cover some of those patches.... it will take him 16 mins total.... in my book that's really good.. job well done.
Cool 18” roller. I always use the Richard gooseneck flexible paint brush extension for all my cutting around a room especially when I am priming. Also when painting a room ceiling and walls one colour. Do a video with this unique paint brush! See how good you are cutting a straight line on a pole!!!! Hyde gooseneck paint brush. 👍👍
Amazing how much coverage you achieve with one dip of your roller,love it...You can achieve the same cutting in with angled Wooster brush 2.5in.. perfecto
Na starą farbe możesz sie tak kolego bawic w takie malowanie. Proponuję tak samo malowac bezposrednio po gladzi zobaczymy co z tego wyjdzie :)) Właściwie Ty zobaczysz bo ja wiem.
You can see right threw the primer. I’m assuming your going to do a couple layers of primer??? But you sure are fast, I could have my house done paint by now if I was this fast.
The sad thing is most colored paint has primer in it so you are better off just painting with the color right off the bat and doing two coats. I've found when I use white primer first I end up painting it three times due to the color not going on evenly during the first coat. So you end up doing one coat primer, two coats color as opposed to just two coats of color. 🤷
Au début de la vidéo j'ai l'impression qu l'on voit le bleu dessous la couche de peinture... 1) faut il une seconde couche ??? 2) la surface à peindre n'était elle pas trop importante ??? Mais beau travail
@@adamnonnenmacher7774 if you don't know then you clearly aren't qualified to speak on the matter. Your attitude/approach to your decorating in your reply says it all! 😅 😂 😂 🤡
He only had the filling in to do, great roller, it took a lot longer to paint around the top and the bottom of the wall, and around doors, light switch's and plug holes ..etcetera.
@@doug8237 I am a civil engineer from a family of contractors. I would fire anyone painting like this. There are great differences in coverage but also drying time which affects opacity and uniformity but also texture direction issues because the roll has to be rotated to fit even architectural features of typical size. Even with 3x the total layers it cant get the quality of proper technique.
Some guys call it „loading the wall“ You spread the excess paint from your roller all over the wall and spread it evenly from there. Depending on the size of wall you’ll either dip more or less pain to have an even layer. This guy doesn’t seem to paint for a very long time yet but he’s learning
Hay maneras y formas de pintar que dependen exclusivamente del pintor... de mi parte no me gusta. Pintar con ventilador encendido hace un efecto de secado "forzoso" que afectan la durabilidad del material. Se vé que es una pintura cubritiva, pero no acompaño la forma de aplicarla. De todos modos gracias por mostrar el vídeo!
This is all a gimmick. First he cut in the white walls with white so he didn't show that part. 2nd, he got streaks all over the place. Saved himself by saying he is priming.
Too bad, looks like he could be a great painter, if one of my guys did this to try to impress me, thanks but no thinks, it can be done quickly(obviously not as fast as this)while applying adequate paint and not dry rolling which flings paint everywhere... looks good on video I suppose...
I'd be more worried about the hard lines he leaves from not feathering his edges inward. That will definitely be visible. Lol. You can control the paint splatter by rolling slow
I'm guessing your not a painter hes dry rolling because the stipple from a roller like this would be all orange peel. for the last coat someone will probably roll behind him to remove the stipple id hope.
@@jennifersimpson7752 its not that.. people paint differently in different countries in nz they don't want brush makes and thick orange peel walls or roller lines .... would be ok in south America uk...but in nz aus or the states you would probably have to skim that wall and start again..
Ahora que ponga el tiempo que se llevó cortando y preparando la pared. Y que aguante trabajando 8 horas continúa con ese ritmo por eso la gente piensa que es fácil pintar. Una casa completa si fuera hasi de fácil. Hágalo usted mismo
I’ve been painting professionally all of my life, and I never try to one coat it when changing colors. That’s amateur stuff. If you leave that much paint on the walls you’ll leave too much texture and it will look unprofessional. I don’t care what technology the paint says it has, I always plan for two coats for color changes.
It’s primer, it doesn’t matter if it’s not perfect coverage. The goal of primer is to basically block out the underlying coat. His top coat will look perfect on top of that primer.
1 Dip for 10ft x 6 wall? Not good . u can hear the sound of the Roller strangling . Keep the roller wet so you can have even Look . and its not about the Speed . is about Perfection . 👍
What is the point of this video if they don't tell you what roller/size/extension pole is being used? It's a literally a man painting w/o any listing of products being used. Useless.
![Oasis - Oasis Live '25 [Official Trailer]](http://i.ytimg.com/vi/gol_JnuEtKM/mqdefault.jpg)
Yeeeeesssss. Thanks for the longer video. It's so satisfying to watch and you do a really great job👏🏾👏🏾
That is amazing how fast you can paint a wall! I hope to be able to paint faster with my next projects by watching your videos.
It's easy to paint fast... but that won't work on a level 5 smooth wall... and you will be getting paint everywhere... won't be a clean job roller marks everywhere I guarantee...
It's not that hard with no furniture in the way. Watch out for roller marks, though. I can't tell you how many bad paint and spackle jobs I've seen done by "professionals".
This guy is probably either using a broken 1 1/4 inch nap or a new 3/4 inch which would be very bad on smooth walls, because it would leave a very strong texture from using an app that size, no matter how far you stretch that paint and plus those walls probably been painted more than a dozen times so I know there’s possibly a text from them already. The next couple videos I produce on my channel are going to be the best snaps to use on walls and ceilings in the sizes
Nice of him to help drip paint the hardwood floors in the middle with specks of paint there.
Would ya believe paint occasionally drips, being a liquid and all. But thankfully painters are exceptional at cleaning up any inevitable drips. You jealous bell end
I think you literally did it faster than a sprayer could. I'm glad to see your roller finally get light in torwards the end of each wall. Lol. Was starting to think you had some supernatural powers keeping the roller full of paint in your other videos lol
A sprayer used buy someone who knows what there doing would destroy this guy..
@@JONO3679 this guy use also a spray in other videos and he is good at it
@@JONO3679 so? There wouldn’t be any texture and that usually requires much more prep.
@@mitchandopolis2665 its the sleeve that gives you the texture .. I dont do anything different in prep if I'm spraying..
Aint going to lie.... regardless he painted a whole upstairs in 8 mins.... even if he applied a 2nd coat to cover some of those patches.... it will take him 16 mins total.... in my book that's really good.. job well done.
Cool 18” roller. I always use the Richard gooseneck flexible paint brush extension for all my cutting around a room especially when I am priming. Also when painting a room ceiling and walls one colour. Do a video with this unique paint brush! See how good you are cutting a straight line on a pole!!!! Hyde gooseneck paint brush. 👍👍
I love when you all leave suggestions. Helps me choose better tools to get this done.
This is hack painting. Fast and cheap!
Cloverdale Premium Classic Junk paint
People will never learn that cheaper is not better.
Amazing how much coverage you achieve with one dip of your roller,love it...You can achieve the same cutting in with angled Wooster brush 2.5in.. perfecto
angled Wooster 2.5" brush ....I'm going to get these.
He sure squeezed the paint out of that roller! And flattened the nap on it!!!
Good job watching your videos all the time
So the paint splitter on the hardwood floors was requested by the home owner????
After years of painting DIY for family and friends
I can't believe how much this makes sense
Just purchased the kit
Thanks mate
What kit is he using?
Got a few tips from you guy in your past videos. Thanks
So now there is paint drops all over?
Great video and wonderful work...
Na starą farbe możesz sie tak kolego bawic w takie malowanie. Proponuję tak samo malowac bezposrednio po gladzi zobaczymy co z tego wyjdzie :)) Właściwie Ty zobaczysz bo ja wiem.
Good job guy, he will probably apply paint in 2 layers?
You can see right threw the primer. I’m assuming your going to do a couple layers of primer??? But you sure are fast, I could have my house done paint by now if I was this fast.
The sad thing is most colored paint has primer in it so you are better off just painting with the color right off the bat and doing two coats. I've found when I use white primer first I end up painting it three times due to the color not going on evenly during the first coat. So you end up doing one coat primer, two coats color as opposed to just two coats of color. 🤷
If he is using a PVA primer then it will do that till it dries
Au début de la vidéo j'ai l'impression qu l'on voit le bleu dessous la couche de peinture...
1) faut il une seconde couche ???
2) la surface à peindre n'était elle pas trop importante ???
Mais beau travail
Quiero un rodillo asi!! 😱😍👏👏👏
Bravo très bon peintre.championdu monde 👏💪👍👌🙋
Paint coverage is unlikely to be even and will show through final result... impressive speed but the quality will definitely suffer
As long as you have good coverage and do enough coats it will be perfect. What are you talking about lol. Paint is paint
@@adamnonnenmacher7774 if you don't know then you clearly aren't qualified to speak on the matter. Your attitude/approach to your decorating in your reply says it all! 😅 😂 😂 🤡
😂 the second coat will make it look perfect. As a painting company I vouch for this technique.
Bro this is being primer the second coat will be finish quality
Let the paint do the work. You won't have to pretty so hard. Otherwise your dry rolling.
Shut up David
How do you get that much coverage with one dip???? I don’t cover that much at all😩
Man I hope you charge by the day because you are moving fast... awesome technique
That register cover below that bay window is going to have some major over spray on it? Or are you painting it?
He only had the filling in to do, great roller, it took a lot longer to paint around the top and the bottom of the wall, and around doors, light switch's and plug holes ..etcetera.
I’m watching this in awe
Incredible coverage
Very nice 👌👍
Bhut wadiya painting a brother
What type of roller are you using?
What colour are you using? Please upload colour-mixing videos too!
Y que pintura usas que puedes pintar tanto sin recargar y no gotea? Por favor dime?
Peinture aquarelle satiné
Ok but this whole room is probably covered in specks of paint flying everywhere with how fast he was going......
Why so much paint on the hardwood in the middle? Why wasn't that covered with a tarp too?
I would have taken that mirror off the wall.
Awww man! The classic \/\/ stoke 😅
How do you make the paint last so long on the roll?
I've asked that same question a few different times on his videos. Lol. If I were doing it, one MAYBE two columns and it would be time to reload it
He just pretends there is still paint on the roll.
I feel like he’s really pushing it. I can hear the roll just drying out.
@@doug8237 I am a civil engineer from a family of contractors. I would fire anyone painting like this. There are great differences in coverage but also drying time which affects opacity and uniformity but also texture direction issues because the roll has to be rotated to fit even architectural features of typical size. Even with 3x the total layers it cant get the quality of proper technique.
This is primer not paint
very good your video i'm from brazil i have a paint factory , i have a doubt what brand of paint you are using
how much do you earn painting an apartment in New York?
I'd like to see how fast he can prep.
Wish I knew about this roller when I had to paint my whole house in 3 days 🤦🏽♀️🤣
Lol. Fast but not the proper way to paint the edges. You have to feather those edges inward or they'll be visible after it dries.
Do you have to wash the walls down first before you start priming? Please text me back thank you;
Tim Williams 🙏🏾
"Text me back" 🤣
Can you let me know what kind of handle you use for your rroler?
I paint so slow 🐌 😅 compared to this.
What *final coat color* was chosen?
🙂
Where do you get those rollers?
what is the thickness of the hair 10 or 12mm?
Se la rifa el Compa para pintar 👍
Просто покраска ,я думала что-то ещё.
Very nice, Which company roller?
what to do once primed?
and why prime
How many cities you paint in a day?
If u prepare properly like he has done u get the job done quick
Why do u do that zig zag across the wall first does it make it easier
Some guys call it „loading the wall“
You spread the excess paint from your roller all over the wall and spread it evenly from there. Depending on the size of wall you’ll either dip more or less pain to have an even layer. This guy doesn’t seem to paint for a very long time yet but he’s learning
Hay maneras y formas de pintar que dependen exclusivamente del pintor... de mi parte no me gusta. Pintar con ventilador encendido hace un efecto de secado "forzoso" que afectan la durabilidad del material. Se vé que es una pintura cubritiva, pero no acompaño la forma de aplicarla. De todos modos gracias por mostrar el vídeo!
This is all a gimmick. First he cut in the white walls with white so he didn't show that part. 2nd, he got streaks all over the place. Saved himself by saying he is priming.
Want to buy this roller
Too bad, looks like he could be a great painter, if one of my guys did this to try to impress me, thanks but no thinks, it can be done quickly(obviously not as fast as this)while applying adequate paint and not dry rolling which flings paint everywhere... looks good on video I suppose...
I'd be more worried about the hard lines he leaves from not feathering his edges inward. That will definitely be visible. Lol. You can control the paint splatter by rolling slow
I'm guessing your not a painter hes dry rolling because the stipple from a roller like this would be all orange peel. for the last coat someone will probably roll behind him to remove the stipple id hope.
It’s primer smh! Haters gonna hate
@@jennifersimpson7752 its not that.. people paint differently in different countries in nz they don't want brush makes and thick orange peel walls or roller lines .... would be ok in south America uk...but in nz aus or the states you would probably have to skim that wall and start again..
Vary nice
Ahora que ponga el tiempo que se llevó cortando y preparando la pared. Y que aguante trabajando 8 horas continúa con ese ritmo por eso la gente piensa que es fácil pintar. Una casa completa si fuera hasi de fácil. Hágalo usted mismo
bhaiya ye konsa roller h
How many houses do you guys make in one day painting
ऐसा रोलर कहां मिलेगा मुझे आवश्यकता है
How to properly draw distembar
What is the name of the roller you are using
Haha is that a miscoat I can still see it flashing not good painting just rushing 😅 u can't rush perfection 😉
Walking all over the hardwood floor just ruins it for me. Why.
Hi there 🙂 How Can I make purchase
That will need a second coat. Just do one wall at a time. Lots of paint at one end and thin at other. Still hard work tho, good job.
I’ve been painting professionally all of my life, and I never try to one coat it when changing colors. That’s amateur stuff. If you leave that much paint on the walls you’ll leave too much texture and it will look unprofessional. I don’t care what technology the paint says it has, I always plan for two coats for color changes.
It’s primer, it doesn’t matter if it’s not perfect coverage. The goal of primer is to basically block out the underlying coat. His top coat will look perfect on top of that primer.
@@Jlymansackhead he’s not doing 1 coat. He’s priming the walls idiot
What roller number you are using for wall
What size nap are you using 3/4"?
Very nice nice 👍👍👍
You still have to paint a few more houses this way and you will never straighten up again!
1 Dip for 10ft x 6 wall? Not good . u can hear the sound of the Roller strangling .
Keep the roller wet so you can have even Look .
and its not about the Speed . is about Perfection .
👍
What paint are they using?!
Espejo????
İlk duvarı iyice taramadın.boya yetmedi. Pervaneyi kapatırmısın boya gereğinden fazla ani kurur.
The repair patches are visible
Porfa diganme en dinde puedo encontrar un ridillo asi para mexico
Superrrb ⚘🥰
5 hour work finished in 5 minutes.
Nice only fast on Paper walls From American
Boyacilarin kralı 😎
هل يوجد مثل هذا للبيع
Only thing with this is that it leaves that horrible texture. I like mine fully smooth finish
What roller sleeves are you guys using also what nap?
Must be 18" roller with ¾ nap
How to save primers
참잘하네요
instead of speed, why not care more about even coverage?
yea yea fast but everywhere stains and 1 day cleaning hahah
😍😍
Bravo les gars super
I'll cheer you in Korea
What is the point of this video if they don't tell you what roller/size/extension pole is being used? It's a literally a man painting w/o any listing of products being used. Useless.
Esse rolo aí é 10
Surtout ne faites pas ça chez vous
La peinture est trop tiré, pas croisé, et pas lissé, c'est un barbouilleur pas un peintre
Whats name is this brash
Iam a professional painter. All I can say is nope.