Don't throw away the old energy saving lamp! ELECTRIC SHOCKER from energy saving lamp.
HTML-код
- Опубликовано: 5 окт 2024
- $2 for 10 PCBs (2-layer, 48hours lead time): jlcpcb.com/e
Electric shocker from an old printer • Electric shocker from ...
Another ELECTRIC SHOCKER • SUPER VIDEO !!! Watch ...
Inside a PCB factory • JLCPCB Factory - 2-lay...
Tranzistors got.by/2rehjd
600pcs resistors got.by/2jhbvc
High voltage diodes got.by/2rehom
High voltage capacitors got.by/2rehrx
High Voltage Transformer got.by/2rehxr
Ready high voltage module got.by/2rei2m
My multimeteres
ali.pub/2i2mrz
ali.pub/2i2msk
ali.pub/2i2mu4
My power supply ali.pub/2i2nc0
My oscilloscope ali.pub/2i2mr0
FOLLOW ME
Instagram / akakasyan
Facebook / kasyan-tv-139150916827430
little tip: a lot of supermarkets have bins where you can disgard your old lamps.
i periodically dig through one and get the CFL's and LED lamps.
good way to get a bunch of these circuits quick and free.
we like the diagram in the end
You should always let people know that you have two RUclips channels, at the end of each video,
I've been looking for a particular video of yours not know it's on the second channel
I did something similar but with more beefy components and using a crt flyback transformer, the arc was much bigger without any voltage multiplier then yours with the voltage multiplier, this video makes me want to add a multiplier stage now
dont do it with a flyback. any high voltage capacitor can send you either to the hospital or the grave if you really fuck up
Their content is always fresh and helpful ❤️
Frist time on youtube i have seen this curkit thanks 😭😭😭😭
???!!!!???
I think u mean circuit right? Btw I thought you meant a cricket at the first glance thou 😂
The one you made in the video sounds nothing like the one you show in the intro
Nice video! Can you make a taser from PC power suply ?
Kasyan TV: Sees a transformer shaped object.
Kasyan TV: Let's fuckin rewind it!!
5:03 what a lovely melody plays while building a potential deadly and painful device. i love it
Kasyan, you scare me just a little bit. 😅 great video and awesome channel. Thank you. ☺
we like the diagram in the end
Hi. I love your videos. Quick question. You clearly stated that your high powered transformer is made by 800 or 1,000 turns. But my question is what if I increased the turns? Will it result in higher voltage? 1500 turns or 2,000 turns possibly in my case. Thanks :)
Yes
The energy transferred will be the same but the voltage will rise but at the cost of less current .
Excellent project
Do you wind the high voltage secondary the same direction as the primary???
Noticed that one is in opposite directions, does it matter??
So great project.
please, i have a question:
can i use this circuit to test the car ignition spark plugs ? or, if you have an idea about a better way to make a good device for testing the spark plugs, without using the car ignition coils.
Many Thanks.
Even i am only 14 years old but i already do it because of this channel..
Wow
I´m thinking about a device for lightning up my oven now. Yes, i know, there are electric lighters to buy - but why not build it by myself :-) ? Thanks for the inspirating video.
I love high voltag ......
Then take care it is really painful
I can use 0.12 mm wire for secondary coil ?
we like the diagram in the end
I searching for a long time. Thanks
Thank you 👍👍👍👍👍
You SHOULD be using Kapton Tape for isolation.
Excellent!
can I using 13005 transistor and 4v battery?
e quanto ao sentido do enrrolamento ( bobinamento )? Os dois devem estar no mesmo sentido?
Man you could put a diode across transistor to protect it from energy spikes(im 12years old and i'm your fan keep up these good videos)(my english sucks)
I'm unlucky with winding transformers by hand
I feel your pain. Transformers can be difficult. I started by using an existing low frequency transformer (as an example: 120v to 12v) and rewind the secondary (120v to 9v). You may also want to look up a circuit called a "joule thief". It's a rather simple circuit that's used to light a white LED from a single cell battery. Winding the transformer for that is easy because the transformer isn't critical, but the better you make the transformer the better it operates.
Sometimes you can find transformers to use in old LCD TV's that power the back lights.
or the easiest way is to find a flyback ttansformer.That circuit will work too.
Yaa🥴 I winded one and it didn't worked.
waw it's working
1 if you have 2 bipolar transistors its much better to use both of them in a royer oscillator configuration. 2 WHY DID YOU USE 0.5 MM WIRE FOR THE FEEDBACK COIL DRIVING THE BASE TROUGH 1K RESISTOR? YOU WASTED VALUABLE SPACE THAT COULD LET YOU WIND MORE SECONDARY TURNS=MORE OUTPUT VOLTAGE. 3 winding 5 layers of tape each layer of secondary windings is again unnecessary overkill. 2 layers of plastic cooking foil will do just fine. 4 after the 2nd stage of the walton-cockroft multiplier its not worth it. if 2 capacitor stages arent enough then you need better transformer.
for feedback coil you can use more thin wire, but with 2 similar it's more easier.
Anyway the 1st row it's primary winding and we put isolatie tap top of themregardless of wire, and secondary winding we start from new row, so we don't lose anything.
The goal is to make a transformer from an economy lamp, and so you can make any transormer.
Isolation is never superfluous when it comes to high-voltage devices, remember high-voltage transformers from TVs, they are also poured with epoxy resin
you need to do a teardown of car ignition coil to see how much isolation is appropriate. 1 layer of tape between secondary layers is more than enough. after that you are wasting space therefore loosing voltage. the place where you need to isolate heavily is after the final layer of the secondary, because it will try to break trough the isolation, go trough the transformer core and arc with the first layer. high voltage transformers are a whole branch of science
Bro can you please give me the circuit diagram of royer foster oscillator with maximum stability please. This single transitor shit sucks and wastes alot of power as heat!
Can use low voltge cap?
Energy saving? 105w???
Pls make more videos on that lead acid battery desulfator results and recovery pls....thanks
soon I will make them
can you make a arc lighter from this energy saver light .....and this circuit can run with the core gape?
Hi, I built your circuit from an old lamp today, but it didn't work! My problem is with the driver circuit, because I tested the transformer and the doubler segment with another driver and it worked and made some very loud sparks!
But with 13007 transistor as driver, the transfomer's secondary wire doesn't spark at all! It draws about 350mA and the transistor gets warm but it dosn't make any spark..
Please help me, I want this circuit to work for me because of its low current consumption..
Man maybe feedback is too small so transistor just shorts across transformer(my english sucks)
@@revolution5547 So how can I increase the feed back?(my English sucks even worse!)
More turns on feedback coil(experiment yourself)
Mine makes very very little arcs idk why
Awesome!
Hi kasyan TV can it run 3.7v battery?
Can i use 70 w cfl bulb
How we can make it more power output using fluorescent lamp circuit ?
YOU CAN GET IT FOR $2 ON EBAY.ITS CALLED HIGH VOLTAGE MODULE.RUNS OF 1.5 TO 6 VOLTS...2 INCH LONG SPARKS
you are correct.these yokels ont understand this.
@Zing Zang so that i am ask him if they can modify the circuit
@pendle Thank you 👍
From this specific kind of energy saving lamp: Did you possibly buy it in middle east?
I have 4 lamp and transistor s are
1,(13005) 2,(13005DT) 3,(AN78M09) 4,(D130C3)
Which one is best to use
Pliz tell me
And can i use 2-6kv capacitor
Idk but you can get cheap high voltage generators from buzz zapper
Thanks
So good.
How to make from cfl bulb
good
Reaches under the bed........ Grabs device the wrong way around ( trying to use the torch ) zap zap 😱😱
Kasyan TV+ Can we use larger value capacitors to create more output power?
yep, but it will take longer time to charge them, and that means lower frequency of the sparks
That's okay, as long as it will drop one of the muggers in the park when you're being jumped, it's a good thing. You can get hit with 1000 volts with little to no current and it wont put you down, but crank that amperage up and you could put a bull down.
yes, you can
MrBrymstond well problem is that when frequency of the sparks drops, it will not have same shocking effect. you need that frequency to keep muggers muscles contracting. if the frequency of zaps is too low, it will just hurt but not paralyze
Will you make vid were you make ampliter thanks
Where did you get 105W CFLs?
(i collect lamps)
I also collect lamps :-)
@@Simion_T Nice :)
I made this circuit, But the voltage output on the transformer is very very low, I made it the exact way you did hooked it up to 9v battery and it makes tiny arcs 1 mm at most, it’s also a very very thin arc only visible in the dark and only makes when I first power it on and when I just turn it off, What went wrong???
I got it working, all good
Robbi Robson at that time it hurt alittle, like one of those zappers from a lighter, after further examination I it turned out I hooked up the transistor wrong, I got it, I put 20 turns on the primary and no idea on the secondary, with 7.2 volts in it made 4mm arcs with 14 v it made 1 cm, and I haven’t played with the primary sense but if I dropped to 10 turns it’d be a nice homemade arc lighter
And I can use ESR capacitor instead resistor?? Told me pls.
NO! It will explode.
I make this project but not work why
The mosfet is overhit? Still i used ?
what would happen if you ci=connected the diodes in parallel ???
if you parallel the diodes,the diode can handle more current.And if you connect the diodes in series,the diodes can handle more voltage.
@@cerealnmilk8060
nice one :)
cool
wow love et
Do you know the muffin man, the muffin man, the muffin man, he lives on candy lane
wow cool
Why your transformer is enough for 1,000 turn?
My transformer from cfl cercuit that max just 400 turn
Nice😀😀😀
My resistor got over heat plz help me...!!😢
Did you get it working?? Replace resister with one that is larger but same color code, the larger resister means its rated for higher wattage and it shouldn’t get as hot
Hi nice video but a have a question i did some calculating aboute the transformer winding and the voltag was 450v how does it well charge a capacetor that need a 1.6kv too charge ☝️👇👇👇
Np=20 Ns=1000t Vp=9v
Soo Vs=Ns*Vp/Np
1000*9/20=450v!!!
Reply please Thanks
but the frequency of the converter? In this variant, 1 winding of the winding (secondary) gives about 1-1.5 Volts
@@KasyanTV hi i have question does it needed to make 20 turn to transistor feedback i mean 4 or 5 turn enough for it thanks
@@KasyanTV the second question the secondery winding it should be in regular I mean from down to top and repeting or from down to top and than from top to down...
Thanks
@@KasyanTV her ☝☝☝
Tried building this but what is SA1 for a component? Seems I'm missing something cause I Gen no voltage at the second coil but I have a resistance of 140 ohms.
Dave Dörenberg-Veltman interesting I too tried to make this circuit but I got couple hundred volts out of the circuit even tho I made it the exact same way, I still don’t know what’s wrong yet
@@talonjuel2098 I'll try again with new wire. But is it required to wind the primary winding first? Ether way I'll try it out some day.
Dave Dörenberg-Veltman umm idk if it’s required to wind the primary first and I’m gonna try again after school when I got time
Dave Dörenberg-Veltman great news got it working great
@@talonjuel2098 nice to hear. After seeing one other video from this channel I think I screwed up with the primary winding. Tried the other day again but broke my last transformer. So I have to go out to find new scrap components. 😔 Good to hear it has worked out for you. 👍😁
How dangerous is this? I know it's a self defense device, but if I were to make one to shock friends, what would I do?
you would lose that friend
Give some knowledge me to wind arc lighter it's not working with me I have trying this from one year still not working 🙁😭😭😭😭😭😭
Can I use In4007 died
No, you need fast diode, you can use example uf4007
@@KasyanTV what the diffrent how much the speed of them can you explan
👍
Haha 100 -adik commentelo vok
rather give it to me
AKA KASYAN ты ли это?
I broke the ferite core
Same dude, it's very fragile😔
first put it in the water and boil.
it isn't problem, you can glue them together with super glue
Watch this video ruclips.net/video/IOwT8GkvIjs/видео.html
there you can see
hummmm.....Zappers for killer hornets....
First view
gareth ronaldo Really??
👍😂
more importantly can it put a man down?
with this device you can't. but in my channel you can find electric shockers for self-defense . Link in the description
To much technical for me.
Are you a girl?
Too difficult pronunciation to understand for me at least..