The Cirklon CK Pattern Informational Video Message

Поделиться
HTML-код
  • Опубликовано: 2 фев 2025

Комментарии • 169

  • @toitoitoy
    @toitoitoy 4 года назад +26

    That's a first real Circklon tutorial. Thanks

  • @duncan-rmi
    @duncan-rmi 4 года назад +21

    my cirklon is ten years old. serial number three. I still learned loads from this. :-)

    • @splitradix
      @splitradix  4 года назад +3

      My CK2 is [2]003.

    • @duncan-rmi
      @duncan-rmi 4 года назад +1

      @@splitradix wow! brothers!

    • @duncan-rmi
      @duncan-rmi 4 года назад +2

      @WilyEPeyote hey, Paul, you see this?

  • @rhialto39
    @rhialto39 4 года назад +12

    This was insanely helpful, please do many more of these.

  • @wolfmoon9540
    @wolfmoon9540 4 года назад +8

    i dont even have a Cirklon and I watched the whole thing

  • @Novolinemusic
    @Novolinemusic Год назад +2

    Shouting out: I use MTC. OR to be more precise, the ancient software I use on Atari ST spits out MTC but I've never had any machine that could do anything with it; so I've suffered in missing out on the potential I have in my studio based around algorithmic composition on multiple Atari ST computers spitting out MIDI. This excludes using Notator which of course has limitations in playback and editing (and speed and usability etc etc) so I haven't gone down the MTC road. (I did figure out 4-track tape sync though during COVID lockdowns; very proud of that..works great with Alesis MMT8)
    I've just arrived to the top of the waiting list of the Cirklon2! I've been pointed to your vids as a reference to see if it will fit my use case. x

  • @OMA_Music_Official
    @OMA_Music_Official Год назад

    Cirklon, basically a cheatsheet for sequencing. Enjoying the excitement building up while I progress through the waiting list and eventually access that brain. For "now" I'll get busy studying the Octatrak & ES Black Sequencer.

  • @64nightfly
    @64nightfly Год назад +1

    This video gave me a BIG head start on learning how to make CK patterns on the Cirklon! Thank you very much!!

  • @m5xac616
    @m5xac616 4 года назад +6

    Brilliant video! This is the sort of deep dive around the Cirklon that is rare to see.
    It'd be great to see you do something in the same vein, building up a track from start to end. Same sort of commentary about what does and doesn't work for your workflow.

    • @splitradix
      @splitradix  4 года назад +5

      Next video will be track control values, after that I think I'll go over song and scene mode.

  • @CoburnNeptune
    @CoburnNeptune 4 года назад +3

    This is exactly the workflow I've been looking/waiting for. Almost my time on the wait list. Take my money Colin!

  • @ivanestades5903
    @ivanestades5903 Год назад +1

    Keep getting back to all of these to refresh as I keep learning, thank you a lot!

  • @frequencymanipulator
    @frequencymanipulator 9 месяцев назад

    I'm re-watching this again. There is so much gold that I get overexcited and then forget it. I need to make some nice methodical notes and instructions.

  • @Malunsmusic
    @Malunsmusic 4 года назад +2

    thank you very very much for this!!! the first tutorial for this machine i can follow :) would be so appreciated to hear more about your workflow on the cirklon! Fat Hug

  • @HarryKelvin
    @HarryKelvin 4 года назад +2

    Excellent tutorial. Helped galvanize much of what I know of my Cirklon. Would love a video about taking separate tracks and patterns and assembling them as a song. That always seems to be the hardest thing to get to for me. Thanks for the great and thorough work.

    • @splitradix
      @splitradix  4 года назад +1

      Galvanize is such a great word.

  • @sandrosupermarket7056
    @sandrosupermarket7056 4 года назад +2

    really appreciate your work! certified cirklon teacher ... cant wait for next vid about track values or Aux options would be awesome!

  • @attorks
    @attorks 4 года назад +1

    I own a Cirklon for 7 years now. Really only use P3 patterns because I have monophonic and modular synthesizers using the CVIO. CK patterns are a bit of a mystery to me but, after seeing this very good in depth tutorial, I will sure investigate further. Thanks a lot for sharing.

  • @bcbcbcbcbc
    @bcbcbcbcbc 4 года назад +3

    Great stuff, thanks for putting this together.

  • @jacco1967
    @jacco1967 2 года назад +1

    Thanks for this introduction.
    New to the Cirklon, so enough to learn.

  • @KyleReiff
    @KyleReiff 4 года назад +1

    As a new cirklon owner, this is incredibly helpful. Many thanks for taking the time to do this. I learned a ton!

  • @twollons8149
    @twollons8149 4 года назад +1

    Amazing tutorial. Thank you for investing the time!

  • @newgreyarea
    @newgreyarea 3 года назад

    I've stepped away from y Cirklon for a few years and am jumping back in. Some of it I remember, most I don't. THANK YOU FOR THIS!!

  • @sebvoigtmusic
    @sebvoigtmusic 4 года назад +1

    woah man. as a new cirklon owner: thanks so much for this video :)

  • @tomcoppens7640
    @tomcoppens7640 4 года назад +1

    As a P3 pattern guy mostly, this is really fun to watch 👌👍

  • @Dsil303
    @Dsil303 3 года назад +1

    Received my cirklon today, this really helps starting to learn it right!

  • @illGatesMusic
    @illGatesMusic 4 года назад

    This is by FAR the best Cirklon tutorial I've seen. Full marks!

  • @davidanderson7920
    @davidanderson7920 3 года назад +1

    thanks so much for this. This is exactly what I've been looking for!

  • @Droidbot_electro
    @Droidbot_electro 3 года назад

    this Sequencer is by far the best hardware ever made. - tutorial is briliant☆☆☆☆☆

  • @thorstenebers2862
    @thorstenebers2862 4 года назад +1

    this vid arrived just in time for my cirklon. looking forward for the other tutorials . kudos to you splitradix. ennjoed the video very much and apreciate as well

  • @StudioMagnetique
    @StudioMagnetique Год назад +2

    Cirklon is one of those pieces of kit that makes no sense until the penny drops and you just get it. Then you wonder how you ever thought it was so complicated.

  • @squijjj
    @squijjj 4 года назад +2

    A+

  • @OOF_MUSIC
    @OOF_MUSIC 6 месяцев назад

    Ridiculously good tutorial! Thanks a lot dude

  • @WARDISWARD
    @WARDISWARD 3 года назад +1

    Beautifull outro man !!

  • @mooseinbeesocks2700
    @mooseinbeesocks2700 4 года назад

    I should be getting mine here soon after my 2 years of waiting. I will be watching the hell out of this series and I hope you make more!!!

    • @mooseinbeesocks2700
      @mooseinbeesocks2700 3 года назад +1

      Damn a year ago already...So after 4 years of waiting I should be getting mine here soon lmao

  • @WilyEPeyote
    @WilyEPeyote 4 года назад +2

    Wow! How did I not know this existed? Splendid work sir!
    BTW there's a nice feature for 'escaping' out of a pattern without saving (carried over from P3 keystrokes). Would mean you don't need to go and explicitly delete a test pattern as here, just leave by saying you don't want to keep. Can't remember if a user config or a serial number thing but ask Colin.
    Hey, I didn't know about CC view! Really must spend more time with CK pattens!

    • @splitradix
      @splitradix  4 года назад

      That feature is unique to your personal firmware I believe. :D

    • @WilyEPeyote
      @WilyEPeyote 4 года назад

      @@splitradix It's serial number coded so I'm sure you could get yours in there. Course you'd have to be addicted to the fast P3 way first to even want it.

  • @zts-1111
    @zts-1111 4 года назад +4

    I use MIDI timecode! I record on an HD24XR, which sends MTC to the Cirklon for synced overdubs.

    • @frequencymanipulator
      @frequencymanipulator 4 года назад

      We have a winner!!!! Fantastic. We want to hear tunes!! Anything link-able?

    • @splitradix
      @splitradix  4 года назад +2

      "There are dozens of us!"

  • @submohr9150
    @submohr9150 3 года назад

    More videos like this would create world peace for me. Nice man👍

    • @splitradix
      @splitradix  3 года назад +1

      The problem with world peace is that it needs more than one person involved to work properly but glad you like the video.

  • @vavh999
    @vavh999 4 года назад +1

    Very nice and informative video, thank you so much! Actually the only really good one out here. Really looking forward for more. The only feature I’m missing from Cirklon is a ”ctrl z”, undo -feature for my clumsy self.

    • @splitradix
      @splitradix  4 года назад +1

      Once you have saved your CK pattern (either manually yourself in the pattern page or automatically when you save a new scene), if you then make changes to that CK pattern you will see the red save button light up, hit save and you have the option to save the new edits, or recall the saved pattern (as well as saving the edits as a new pattern).

  • @jimmygray3452
    @jimmygray3452 3 года назад

    I'd love it if someone made a tutorial for using the Cirklon and CK patterns with the Drum Mux. Thanks for these videos, they're really helpful!

    • @splitradix
      @splitradix  3 года назад +1

      I'll probably do a CVIO / DMUX configuration video once I finish the Accumulator Aux Event video. The DMUX is actually pretty easy to set-up.

  • @theway3058
    @theway3058 4 года назад +1

    I like this dude. I’m subbing.

  • @frequencymanipulator
    @frequencymanipulator 4 года назад +2

    THERE BE GOLD IN THEM THERE HILLS!!! Gosh, what a great video. Please do more. What ever you fancy doing next, we are with you. P3 mode seems like a logical step?

    • @splitradix
      @splitradix  4 года назад

      Track control values is next (already recorded). P3 pattern video will take a while and will probably be multiple videos.

  • @leighschulz5627
    @leighschulz5627 4 года назад

    Excellent tutorial! Can't wait for the P3 mode tutorial :)

  • @HANGINGOUTWITHAUDIOPHILES
    @HANGINGOUTWITHAUDIOPHILES 3 года назад +1

    gold. Absolute gold

  • @BenjaminBeak
    @BenjaminBeak 4 года назад

    thank you so much for making these

  • @northerntao
    @northerntao 4 года назад

    Good stuff - had mine for a few years and I’ve picked up a few nuggets. Thanks!
    Can’t wait for the upgrade so I can get the USB host and that sexy time screen!
    I like using P3 pattens with my Rytm in multitimbral mode. Not as easy to layout a beat, but the auxes and accumulators are handy

  • @6020fsk
    @6020fsk 3 года назад +1

    thank you so much for this

  • @alecbrady4124
    @alecbrady4124 4 года назад +1

    thumbnail is art

    • @splitradix
      @splitradix  4 года назад

      I don't use the Cirklon, I live the Cirklon.

    • @alecbrady4124
      @alecbrady4124 4 года назад +1

      splitradix big ups

  • @spookypen
    @spookypen 3 года назад +1

    3:23
    I do, I run a SMPTE track on a Tascam DP32 which gets sent to a MOTU micro express, converts SMPTE to MTC, and then sends the MTC into my MPC 2500 via 5 pin which syncs to the SMPTE track. Still on the waiting list for a Cirklon as the MPC is a bit of a bottleneck. :/

  • @instantknut
    @instantknut 4 года назад +2

    OMG since when can you loop bars inside a CK pattern!? Best Cirklon tutorial, please make one explaining the P3 Aux madness!

  • @ratchetboo
    @ratchetboo 3 года назад +1

    goated

  • @chrisbutler6195
    @chrisbutler6195 4 года назад

    I was trying to get Ableton synced to my Cirklon, and after failing miserably, tried MIDI timecode instead of MIDI clock, and it worked! There was still latency I couldn't pin down, but at least I no longer had terrible, continuous tempo drift!

    • @frequencymanipulator
      @frequencymanipulator 4 года назад +2

      I used an expert sleepers ES-5

    • @sandrosupermarket7056
      @sandrosupermarket7056 4 года назад

      at least you can sync Ableton to Cirklon! I use Cubase (Steinberg) they dont allow external sequencer to clock Cubase .. pfff :-)

  • @davidkittmusic
    @davidkittmusic 4 года назад +1

    there he is!

  • @providief
    @providief Год назад +1

    Do you combine using this with the AR trigless trigs? I have just received my V2 and am just learning to use it. I would really miss the trig conditions and specific note/step values + effects on the Elektron stuff. The sequencing power and range of the Cirklon is just insane though. I have waited 6 years to get one of these! :,)

  • @ankurseres
    @ankurseres 4 года назад

    i hate tutorials, but this is awesome!!!!

  • @Thomachinex
    @Thomachinex 4 года назад +1

    I use Midi Timecode! Not by choice though. Akai Force doesnt let you sample when slaved to midi clock. So MTC it is.

  • @akai2kxl876
    @akai2kxl876 2 года назад

    thank u so much senpai

  • @WARDISWARD
    @WARDISWARD 3 года назад

    49:20
    When I assgin track control c74 (or any other cc) to knob A or B and tweak it , I get hung midi notes and midi obstruction resulting in lots of midi notes released at once , also affecting the channels that did not receive midi cc in the first place
    Happens on all my digi synths (including nord modular ) and tried mutiple midi cables
    Sincerely hope it's a bug and it would be great if you could take some time to try to replicate it
    It mostly happens when doing slow sweeps 10 seconds rise , 10 seconds fall
    Happens with cirklon 2

  • @jimigrok
    @jimigrok 3 года назад

    wow - very nice tutorial !! Thanks

  • @yellekwerdna
    @yellekwerdna 4 года назад

    Many thanks!

  • @leewraith223
    @leewraith223 9 месяцев назад

    Hi splitradix, thanks for these amazing videos… do you happen to know how to connect the polyend tracker so it plays 8 channels of audio controlled by the cirklon? Or is this not possible???

  • @WARDISWARD
    @WARDISWARD 3 года назад

    07:00
    How do you assign knob A to insert velocity in a ck pattern , for met it only works while using the sculpt button when recording
    Alos at 29:40
    When you press the record in an empty ck pattern , the menu automatically pops up , over here I have to manually press the menu button

    • @splitradix
      @splitradix  3 года назад

      What OS are you running?

    • @WARDISWARD
      @WARDISWARD 3 года назад

      @@splitradix
      1.20c2
      It seems that using knob for velocity insert in a ck pattern only works for the first time you insert notes ( the value is then stored in the row view )
      I posted some bugs on the forum , if you jump from ck row view into cc edit , it doesn't record anything , nor can you hear any outcoming midi cc's >
      Overwriting already recorded cc's doesn't work here , it just gets mixed with the existing data which results in garbled mess
      Probably will get fixed
      CIrklon is damn fine sequencer , dare I say I really see it as an instrument
      Totally worth the investment

    • @splitradix
      @splitradix  3 года назад

      1.20d is the latest OS version, try giving that one a go.

  • @gel1912
    @gel1912 2 года назад +2

    I use MTC when syncing to DAW

  • @Fauxleroid
    @Fauxleroid 3 года назад +1

    How do you bring up the fractal screen?

  • @alexwalshe5244
    @alexwalshe5244 4 года назад +1

    Great video super helpfull tkx! but when I press Shift Row I don't have the CC pages it just goes to velo/leng/delay does someone have a clue?

    • @splitradix
      @splitradix  4 года назад

      That's because you're on an old firmware from the year 12BC. Check the video description for a link to the latest firmware which will add things like the CC view and more!

  • @theway3058
    @theway3058 4 года назад

    I’m on the list. Under 2 years is what there telling me. Maybe I should just go big and spend the 3500 dollars and get one of reverb.

  • @rthe0
    @rthe0 4 года назад +3

    was discussing with my dad yesterday whether this was a good buy or not

    • @frequencymanipulator
      @frequencymanipulator 4 года назад

      What does yer dad think? :D

    • @rthe0
      @rthe0 4 года назад

      @@frequencymanipulator prob too hard to aquire one :(

    • @frequencymanipulator
      @frequencymanipulator 4 года назад

      @@rthe0 Never write off your dreams of owning quality instruments.If you work hard, learn the theories of everything, life may find a way.

    • @rthe0
      @rthe0 4 года назад

      @@frequencymanipulator i defo agree i used to think that way about owning a 101 being unable to afford it and then i managed to get one in 2018 :) one of my fave synths of all time

    • @northerntao
      @northerntao 4 года назад

      Get in line now - probably have to wait a couple years. Wait times have increased with its popularity

  • @universeofme-hitherto
    @universeofme-hitherto Год назад

    really useful video thank you :) I would like to ask a question though. I'am also using analog rytm and set it up as you showed in the video. however when externally sequencing the rytm the mute pads don't work on my rytm. how can do mute and unmute different tracks on the rytm?

    • @splitradix
      @splitradix  Год назад

      Why do you need to mute a track on the Elektron if you are sequencing it via the Cirklon? Just don't send that track a note and it won't play.

  • @BOORCHESS
    @BOORCHESS 3 года назад

    P3 Aux arcania from the good Dr. Splitradix still coming ?

  • @shrimpzone3833
    @shrimpzone3833 3 года назад

    Thank you for this and all your videos they are fantastic!
    Had to scroll down in comments and find the one guy who uses MTC 🤣 You know who else uses MTC? Apparently all Logic users!
    Somehow , I hope I am wrong(?) Logic can only send midi clock, but cannot receive it. It can, however, receive MTC!🤪
    Would love to sync Logic to midi clock for recording purposes (ie. overdubs) and keep Cirklon as master clock. maybe there's a way..

  • @djmaytag303
    @djmaytag303 2 года назад

    Could you do a video specific to MIDI port config? I can get my MIDI controller to play a synth on port 4 (CH 1) when it's set as you've showed, but it only works when setting soft/thru to "thru." It doesn't do anything when set to "edtrk". Also, I could not get the controller to route through the 16 host ports in my mioXL. I have to route MIDI from the controller to a DIN MIDI output of the mioXL, and into CK2 port 4. I don't get this at all.

  • @tomdwij
    @tomdwij 11 месяцев назад

    Is there a way to easily mute a midi row in drum grid...out of interest..Im being lazy.

  • @greenturmalin
    @greenturmalin Год назад

    thank you :)

  • @antskaljurand3091
    @antskaljurand3091 10 месяцев назад

    Can you filter what you see on each step like notes only??

  • @EricFoster
    @EricFoster Год назад

    I'm looking for a hardware sequencer that will let me take, for instance, a snare and have it randomly roll or ratchet. Would something like that be possible with this?

    • @frequencymanipulator
      @frequencymanipulator 9 месяцев назад

      Yes Sir. You can set the probability for gates + many other randomisations for CCs etc.

  • @williamlittlejohn5929
    @williamlittlejohn5929 3 года назад

    As usual,very good video!Always a ref for me to follow…many thanks for that work !Really helpful !
    A small question though…following you with the book : set up my TR 909 this morning in CK pattern…didn’t know the drum map so was going random and found all my notes,perfect…renamed,really nice…BUT,is one of you guys could tell me how to delete a note ?
    «add/edit» :ok but to delete ?
    Have a great day!

    • @splitradix
      @splitradix  3 года назад +1

      In the "add/edit" menu set the fixed row back to "no". Make sure you have no notes active on the row, you might also need to do a "purge muted notes" to remove any muted notes.

    • @williamlittlejohn5929
      @williamlittlejohn5929 3 года назад

      @@splitradix thanks for the answer…not really well explained in the book though…
      Hopefully you are there!
      I will do that when back on the machines!
      Have an excellent day!
      UPDATE: works perfectly...no/purge/then back to track then pattern to make it effective and not showing ...👍👍👍👍

  • @TRaddcliff
    @TRaddcliff Год назад

    when moving triggers around, ganged or not...does the move wrap around, or does it hit the end of the bar/pattern? ex: step 16 could end up on step 1 if moved by 1

  • @mpauley82
    @mpauley82 2 года назад +2

    We are using MIDI time code, but only because Logic Pro can only slave via MTC

    • @splitradix
      @splitradix  2 года назад +1

      "There are dozens of us!"

  • @lab-by-the-sea
    @lab-by-the-sea 4 года назад

    the menue at 5:00 is not in the version 1.11h on the 2018 model right? there is no option for def, seq...

    • @splitradix
      @splitradix  4 года назад

      Update your firmware. Link is in the video notes.

    • @lab-by-the-sea
      @lab-by-the-sea 4 года назад

      @@splitradix i see you used a beta which was not mentioned on the website! thanks for the link!

  • @gullyman777
    @gullyman777 3 года назад

    I’ve just got my cirklon what order do you recommend to watch these videos in to learn best? Thanks!

  • @miekwavesoundlab
    @miekwavesoundlab 3 года назад

    I own Motof XF, Korg M3, Virus TI.
    Current using two RM1x but buttons are fading out and stop working :( and getting random memory failure.
    Is cirklon have same real-time Pattern remix features as RM1x / RS7000? I’d love to get my hands on circlon! Seems very promising.
    can I send random (in key) chords every bar on output 1 into Korg M3 Karmas then re-record that 64 bars of Karma to input 1?
    That would be amazing!!
    I could side n dice 16 pattern variations with that.

  • @newtronix
    @newtronix 3 года назад

    Superb tutorial. How long did you have to wait for your Cirklon? I haven't even got mine yet. I'm torturing myself by seeing what I could be doing with it!

  • @kisho2679
    @kisho2679 4 года назад +1

    when should one use the "Cirklon" instead of the "Pyramid"?

    • @frequencymanipulator
      @frequencymanipulator 4 года назад

      A very personal choice, although I don't know enough about the Pyramid to comment. A friend did have their mini one, I was constantly belittling it, because he was struggling with things which are rudimentary on the Cirkon. The Cirklon does not do everything, yet what it does, it does spectacularly. For the record, I am happy with my purchase and continue to use it. There are some videos on my channel with some of my results. I think this one is my best: ruclips.net/video/ufH0c5Y9bno/видео.html

    • @juliaseppi2205
      @juliaseppi2205 4 года назад

      Cirklon has much more going on imo. First and foremost in wins on its connectivity. The aux functions make it unique. Its build quality is excellent. I'm sure the pyramid is no slouch yet it looks fiddly to use.

  • @LoveMeBack
    @LoveMeBack 7 месяцев назад

    So every time you start a new scene you have add rows again?

  • @paulmanley7999
    @paulmanley7999 2 года назад

    Thanks for these informational videos. I Just got mine a couple weeks ago. Im already amazed with what it can do and I have so much to learn. How to get the fractal on the screen? Seriously how?

    • @splitradix
      @splitradix  2 года назад

      SHIFT + INSERT, then SHIFT + 3. Only works on the CK2.

    • @paulmanley7999
      @paulmanley7999 2 года назад

      @@splitradix nice! I found my way into the fractals.

  • @kisho2679
    @kisho2679 3 года назад

    can't those evelopes be drawn just with the finger on the touch screen (e.g. for evolving velocity over steps range)?

    • @splitradix
      @splitradix  3 года назад

      No touchscreen features have been implemented yet.

  • @parhamattarpour9616
    @parhamattarpour9616 3 года назад

    Thank you so much for taking the time to create these and share the knowledge. Do you know if there’s a way to mute or solo a whole note line at once? If you’re recording main outs of a drum machine for example and want to isolate one element at a time when you’re ready to record, what’s the best way?

    • @parhamattarpour9616
      @parhamattarpour9616 3 года назад +1

      Just following up here, the last firmware build addresses this (sept '21) which allows rows to be muted by holding Solo and pushing the Row encoder. cheers!

  • @2pandaemonium2
    @2pandaemonium2 3 года назад

    Thanks a lot for these vids! May I ask what camera you used to record?

    • @splitradix
      @splitradix  3 года назад +1

      A Panasonic HC-V770EB-K which isn't very good.

    • @2pandaemonium2
      @2pandaemonium2 3 года назад

      @@splitradix looks good enough to me. Or it’s the lighting.

  • @Fauxleroid
    @Fauxleroid 3 года назад +1

    Like an idiot I watched this one last. It would have been really useful to see this one first lol. CK patterns are the last thing I've explored on the device. Noobs, watch this one first!

  • @derekkatwijk
    @derekkatwijk 4 года назад

    Great tips. Do you maybe know if you can tap in and record new patterns on the Cirklon itself with a sequence running?

    • @splitradix
      @splitradix  4 года назад

      You mean record extra notes into an existing pattern while it's running? Yes, just hit record while you are in the pattern edit screen and you can record more notes into an existing pattern.

    • @derekkatwijk
      @derekkatwijk 4 года назад

      Like this: on the 7minute mark ruclips.net/video/orWK3LOg6zU/видео.html

    • @splitradix
      @splitradix  4 года назад +1

      @@derekkatwijk Yes you can do that in a CK pattern while it's in record mode by tapping the sculpt button. I forgot about that and left it out of the video, will include it in the next "things I forgot about" video.

  • @sssncodesstuff3364
    @sssncodesstuff3364 3 года назад

    Why do you set edittrk on all midi ports? You can set it only on the midi port where your master key is connected and it work for any track you have currently selected. If you have edittrk selected on all midi ports, and you have connected both midi in and out for each synth, you are going to mess synth listening to track that is currently selected if you touch any other synth which sends CCs..(if synth on edit track has anything mapped to that CC of course)

    • @splitradix
      @splitradix  3 года назад +1

      I have multiple other sequencers and midi controllers connected into the Cirklon, I want each of them to affect the track I have currently selected so I can record them.

    • @sssncodesstuff3364
      @sssncodesstuff3364 3 года назад

      @@splitradix Oh ok then that totally make sense, I do have (almost)each synth conected to both in and out on same port(to be able to record live tweaking into CK patterns) and somehow was thinking you're doing the same, routing output of each synth to edittrk that way, my bad)

  • @C4ss368
    @C4ss368 3 года назад

    Just encountered an issue. Been following the video but after recording sweeps on one CC it won’t let me switch the cc using the row encoder. Just stays stuck on the cc I recorded the sweep with. Any ideas? Thank you for the video!

    • @splitradix
      @splitradix  3 года назад +3

      After you record, moving the row encoder will only change to CCs that have values in them (to make it easier to check what you recorded without going through every CC). To view the other blank CC pages hold shift and then move the row encoder.

  • @kisho2679
    @kisho2679 3 года назад

    can you prelisten the notes by scrolling over them when setting up?

  • @tomrobinsontba
    @tomrobinsontba 4 года назад

    I use Midi Time code for syncing my HD 24.

  • @RoeJogan
    @RoeJogan 3 года назад

    Is it possible to add our own jpg onto the screen?

  • @alaeifR
    @alaeifR 4 года назад +1

    If only we had a CK per-note-mute we could actually use CK patterns for live performance and jams!

    • @WilyEPeyote
      @WilyEPeyote 4 года назад +2

      Gotta say that's how I've used Ck patterns for the last decade - for live performance and jams, more like a MIDI looper than anything else. I guess you're using CK patterns for your drums - I do mine on P3 patterns for the aux events. Maybe note muting will come...

    • @splitradix
      @splitradix  4 года назад +2

      CK row mute is a feature request lots of people have made on the Sequentix forum so hopefully it will get implemented.

    • @Malunsmusic
      @Malunsmusic 4 года назад

      @@splitradix yup, thats a wanna have +

  • @BOORCHESS
    @BOORCHESS 4 года назад

    Can the Track Value sweeps be live recorded ?

    • @splitradix
      @splitradix  4 года назад

      CC track values can but track control values currently cannot. The next video is going to be all about track control values.

    • @CausaliDox
      @CausaliDox 3 года назад

      @@splitradix Yes, you can record track values, but only the CC's, just press record and sweep away. Also you can add a lot more track values than just the six.

  • @frequencymanipulator
    @frequencymanipulator 4 года назад +1

    You any good at VSIG?

    • @splitradix
      @splitradix  4 года назад

      Italo de Angelis is the master of VSIG, I'm just an amateur. Currently it won't run on my Macbook anyway. I need to get a PC laptop for it.

  • @JulioAvalos3000
    @JulioAvalos3000 2 года назад +1

    Actually, Cirklon has one of the easiest workflows around. It gives you lots of buttons to control the system.

  • @tombrews
    @tombrews 4 года назад +1

    Would be nice if you could use the encoders to edit midi CC's in CK patterns, like how they work in p3

    • @splitradix
      @splitradix  4 года назад +4

      I often have a CK pattern on one track sending notes to a synth and then a P3 pattern on another track sending CC information to the same synth to get around this.

    • @splitradix
      @splitradix  4 года назад

      Just realised I didn't answer this properly, you can use the encoders to edit the midi CCs in the event list in CK patterns. Not as quick as doing it in a P3 pattern though as you can only edit one midi CC value at a time in the CK event list.

  • @TR-707
    @TR-707 Год назад

    i will never use this thing! encountered in a studio, met people that use it, i dont get it. It must be a zen thing and once you have muscle memory its just bliss. But its like learning some flight sim

    • @splitradix
      @splitradix  Год назад +3

      It's more difficult than F-15 Strike Eagle II on the Amiga but easier than Microsoft Flight Simulator X on a PC.

    • @frequencymanipulator
      @frequencymanipulator 9 месяцев назад

      @@splitradix LOOOOOOOOL 🦑🔥