21:10 - Edit a part 27:07 - Create a material 31:02 - create a section 35:33 - create a profile 40:17 - create steps 50:29 - load 50:42 - BC's 1:01:13 - create a job
Nice explanation with all of the calm that is needed for a beginner. I would just point one thing, when you digit 400 in "Pressure Load" i think you are putting 400 Pa in that surface that should be 0.003 m^2. It means that there is a load of 1,2 N applied.
Hi Ayodamola, we invite you to join the SIMULIA Community where you can ask specific Abaqus related engineering questions: www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&
Nice introduction. Just started it yesterday and I look forward to mastering this soon..I have really learnt much in this. Kudos to the explanations and clarity!
The best tutorial ever. Thank you for making the learning process exponantionally easier. 😊It was the most enjoyable explanation I ever had, ❤ a real pleasure to watch and follow.
Hi Pawan, here are two videos on our channel that may be helpful in your Abaqus/Explicit efforts: bit.ly/2R6Jtw9 bit.ly/2Rr1xQp We also expect to publish similar videos 2020, so you are in luck and please stay tuned!
You wanted to apply 40kg(400N) as weight, but you applied that in the "Pressure" category. So, that would mean, you applied 400N/m2 on that face, not a weight of 400N, right? Or am I missing something? I just started to learn Abaqus, which is why I am getting a little confused.
Hi Shubham, we hope you have an amazing journey with us. We want to invite you to join the SIMULIA Community, where you can contact our experts and Abaqus peers. www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&
@@UsmanSaleemSulehri I thought it is in Newton as "uniform force" to apply on that surface and it is Abaqus to calculate the area and then associated pressure based on force input...
!!!!!!!!!!!!!!!!!!! PLEASEE HELPP !!!!!!!!!!!!!!!!!!! I have followed this tutorial step by step when I arrive at the Analysis part, I create a Job. When submittion, it starts to run, but a couple seconds later, the running is "aborted". Why is this? I think I have done everything exactly the same.....I am using Abaqus/CAE student Edition 2021 THE ERRORS: Error in job LoadedBarbellStand: A CONSOLIDATION ANALYSIS IS NOT MEANINGFUL BECAUSE NO PERMEABILITY DATA HAVE BEEN GIVEN. Error in job LoadedBarbellStand: DEGREE OF FREEDOM 8 AND AT LEAST ONE OF DEGREES OF FREEDOM 1 THRU 6 MUST BE ACTIVE IN THE MODEL FOR *SOILS. CHECK THE PROCEDURE AND ELEMENT TYPES USED IN THIS MODEL.
Good night, i need our help, i have a problem with the mesh when i use Assembly and use merge for a rectangule and a sphere, but when i try mesh the assembly, i have a problem, i need help, please
Hi Thank you for your fantastic tutorial. Can you provide the links that continues this lecture? I couldn't find them in the channel. I would like to have more in-depth knowledge of working with ABAQUS
Isnt the unit of the Load defined incorrectly? you said 400N but ABAQUS requests pressure. In your units, wouldnt that be 400N/surface Area of surface where pressure is applied (in m squared)?
Hey, one question: once you apply a Boundary Condition to an early step (the FixedToGround in the Initial Step, for example), the BC is automatically carried over to all subsequent steps? Anda thanks for the video! :)
Hi, thanks for explaining everything in detail. Very helpful indeed. I wanted to ask u about the pressure force, You have applied 400N on an area, for a 40kg Barbell, weren't u supposed to convert this force in pressure as per the selected area? Please clarify. You response would be much appreciated
Your tutorial video gives a complete steps and really good idea on Abaqus. Thank you. Please can you prepare tutorial for a simply supported four-point bending of Timber-concrete composite beam?
Thank you, Akash! We invite you to join our SIMULIA Community - make a profile, explore the 3DEXPERIENCE Dashboard and connect with your peers! www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&
I'm going to model a masonry wall in abaqus for simulation purpose, i have a question that should i select Deformable or discrete rigid in the type during creating part?
Hi, can you explain me how to get compression values with the sign minus? this software give all the information about the stress always with the plus sign, why? A link to a page where there is this explanation is useful too. Thank you
I'm in my final year of mechanical engineering school and for my senior design project we need to simulate a golfers swing with and without our prosthetic design, can this software do that and or do you know of a software that would be best for the task?
Hi Brandyn, please reach out to our sales team with your specific question regarding the task at hand. Please note, there is a free version of our Abaqus software for University students. www.3ds.com/how-to-buy/contact-sales/
I want to simulate a push with a stamp into a foil (deep-drawing). Which type for selected step is appropriate? (The movment should will be made by the stamp). Thank you!
Great video! well-explained! Can you explain the exaggeration part in the results? the multiplication with a factor to increase the deformation. Is it explained in any next video? If yes, kindly give the link thanks!
Hi Sana, Thank you for your input! We encourage you to join the SIMULIA Community, where you can join for free and pose additional questions to a community of SIMULIA engineering peers and technical experts. Here is a link to the community on Dassault Systèmes' 3DEXPERIENCE Platform: eu1-ds-iam.3dexperience.3ds.com/cas/login?service=https%3A//r1132100503382-eu1-3dswym.3dexperience.3ds.com/
Amazing video, thank you. I was looking for some videos helping me implement damage in composite materials. Do we have those resources on internet too? I could not find them on your channel. Any lead would be appreciated, thank you.
Hi Aaditya, we invite you to join the SIMULIA Community, where even more tutorial content is available and you can network with peers and technical experts. It's free to join! www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&
21:10 - Edit a part
27:07 - Create a material
31:02 - create a section
35:33 - create a profile
40:17 - create steps
50:29 - load
50:42 - BC's
1:01:13 - create a job
Nice explanation with all of the calm that is needed for a beginner. I would just point one thing, when you digit 400 in "Pressure Load" i think you are putting 400 Pa in that surface that should be 0.003 m^2. It means that there is a load of 1,2 N applied.
You are an incredible teacher, I enjoyed your teaching method, good pace, logical and organized
Âllah is the Pagan God made by Muhhmmdh
The explanation provided at each and every step is apt and crystal clear. Enjoyed the whole video
Your are not just talented, you are gifted in Teaching.
Was searching for so long....At last, found it!! wonderfully explained
Thank y'all for this post. They go through it so fast in class
Hi Ayodamola, we invite you to join the SIMULIA Community where you can ask specific Abaqus related engineering questions: www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&
it is astonishing that I didn't get bore nowhere, loved it
Nice introduction. Just started it yesterday and I look forward to mastering this soon..I have really learnt much in this. Kudos to the explanations and clarity!
We are glad it was helpful! 😊
The best tutorial ever. Thank you for making the learning process exponantionally easier. 😊It was the most enjoyable explanation I ever had, ❤ a real pleasure to watch and follow.
Happy to help!
@@3dsSIMULIA Do you have a tutorial of Curcular Hollow section simulation? 😁
I've never enjoyed learning more than this.thank you for the outstanding and usefull content
I liked the video so much, it s the best so far, i would love to learn more from other tutorials of yours once i find them, thank you for ur work.
Thank you Nada el Jouchine!
This gives complete steps of Abaqus. Thank you so much!
I am unable to open the software
Pls help
@@ShashankEarth you can download Abaqus 2019 from this link if you have torrent software
Best tutorial ever, please make more on abaqus cae and explicit. If possible a bullet penetration through armour material. It will be of great help
Hi Pawan, here are two videos on our channel that may be helpful in your Abaqus/Explicit efforts:
bit.ly/2R6Jtw9
bit.ly/2Rr1xQp
We also expect to publish similar videos 2020, so you are in luck and please stay tuned!
Exceptional explanation, much appreciated, and many thanks for this wonderful stuff
You're welcome! We're glad it helped!
You wanted to apply 40kg(400N) as weight, but you applied that in the "Pressure" category. So, that would mean, you applied 400N/m2 on that face, not a weight of 400N, right?
Or am I missing something? I just started to learn Abaqus, which is why I am getting a little confused.
You're right and can refer to the Abaqus documentation by selecting the "arrow+?" symbol and clicking on the "Magnitude" field while editing the load.
So fluent, thank for this
awesomee, 1000 point to you sir
Thank you so much, I wish I had someone to explaine this to me during my Phd study 10 years ago.
We are so glad it was helpful!
GREAT tutorial video for a starter. Keep this up!
We are glad you found it useful!
Great introductory video on ABAQUS - thank you!
Best tutorial...today was my day 1 with abaqus...thank you so much sir for such a nice explanation❤
Hi Shubham, we hope you have an amazing journey with us. We want to invite you to join the SIMULIA Community, where you can contact our experts and Abaqus peers. www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&
that was AMAZING !! thank you very much
Excellent tutorial !!!! Thanks for sharing...
this is just awesome explanation for the beginners, thanks
You're welcome! ☺
Thanks a lot, sir. great explanation and performance through the complex tools.
Great Video, one of the best on RUclips for beginners, Detailed with lots of info and discussion 10/10, thank you
This tutorial video helped me a lot. Thanks. :)
Happy to hear it helped! We invite you to join our SIMULIA Community: www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&
At 53:43 pressure is defined as F/A (in Pa) not in Newtons... Great video!
Came to comments to see if it's a mistake. Magnitude of pressure can be 400 if we assume it's on a meter square but doesn't seem like it.
@@UsmanSaleemSulehri I thought it is in Newton as "uniform force" to apply on that surface and it is Abaqus to calculate the area and then associated pressure based on force input...
!!!!!!!!!!!!!!!!!!! PLEASEE HELPP !!!!!!!!!!!!!!!!!!!
I have followed this tutorial step by step
when I arrive at the Analysis part, I create a Job.
When submittion, it starts to run, but a couple seconds later, the running is "aborted".
Why is this? I think I have done everything exactly the same.....I am using Abaqus/CAE student Edition 2021
THE ERRORS:
Error in job LoadedBarbellStand: A CONSOLIDATION ANALYSIS IS NOT MEANINGFUL BECAUSE NO PERMEABILITY DATA HAVE BEEN GIVEN.
Error in job LoadedBarbellStand: DEGREE OF FREEDOM 8 AND AT LEAST ONE OF DEGREES OF FREEDOM 1 THRU 6 MUST BE ACTIVE IN THE MODEL FOR *SOILS. CHECK THE PROCEDURE AND ELEMENT TYPES USED IN THIS MODEL.
Thank you very much. Your presentation is superb!
Fantastic video! Thank you so much for posting it. Incredibly useful.
It was an amazing tutorial. Where can I find the next level tutorial videos that he mentioned in the tutorial above? I really need them.
Incredible, thank you!
Good night, i need our help, i have a problem with the mesh when i use Assembly and use merge for a rectangule and a sphere, but when i try mesh the assembly, i have a problem, i need help, please
thank you very much for your tutorial
Thank you so much!
Thanks, can u please create a list, number the videos, or tell me which video should I watch after this. Looking forward to hearing from u
Its great, everybody does modelling and shows contours, its not what everyone needs, we need results and interpretation . This is just a basic.
Why is the von mises stress is in E+3 at the end?? That's enormous isn't it?
where can i get rest of the videos of this playlist?
You deserve my subscription❤
We are glad you enjoy the content! 💙
Very nice thorough tutorial. Thank you.
Excellent job. Thanks a lot for it. It's very well done.
Hi Thank you for your fantastic tutorial. Can you provide the links that continues this lecture? I couldn't find them in the channel. I would like to have more in-depth knowledge of working with ABAQUS
Did you find them?
@@UsmanSaleemSulehri ?
@@BanuMusaGr I didn't
Thank you for a good tutorial.
Where can I download the Japanese version of the Abaqus User Manual?
very nice sir......please make furthur videos also
Excellent video!!
Great tutorial! thanks
Thank you Sir. Could you please make one video on Road Tunnel. I need help with blast analysis on the tunnel.
that rounded play logo is so 90's, I think you should update it to a more flat, minimalistic modern version
Thank you
I try to create a new model database and choose With CFD Model ,but instead of with CFD ,I see With electromagnetic Model .What should I do ?
Thanks it was very usefull
Isnt the unit of the Load defined incorrectly? you said 400N but ABAQUS requests pressure. In your units, wouldnt that be 400N/surface Area of surface where pressure is applied (in m squared)?
Thankyou so much sir
Hey, one question: once you apply a Boundary Condition to an early step (the FixedToGround in the Initial Step, for example), the BC is automatically carried over to all subsequent steps?
Anda thanks for the video! :)
Thanks a lot. Amazingly explained. How can I find next videos? I checked on the channel but can't find anything
Sir how to apply real ground motion data taken from PEER Ground Motion DataBase in Abaqus??
There is a little bit confusion in the software, how the pressure equals force and use the newton as unit?
Hi, thanks for explaining everything in detail. Very helpful indeed.
I wanted to ask u about the pressure force, You have applied 400N on an area, for a 40kg Barbell, weren't u supposed to convert this force in pressure as per the selected area? Please clarify.
You response would be much appreciated
Yes he should have, I think it’s a mistake, although it does not impact the tutorial itself.
He goes to pressure option > Select some area > Give the force to be applied in that area. The software finishes the work.
very nicely explained, where is the link to next videos after this?
Your tutorial video gives a complete steps and really good idea on Abaqus. Thank you.
Please can you prepare tutorial for a simply supported four-point bending of Timber-concrete composite beam?
Excellent explanation. 👍🙏
Thank you, Akash! We invite you to join our SIMULIA Community - make a profile, explore the 3DEXPERIENCE Dashboard and connect with your peers! www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&
Thanks guys
I'm going to model a masonry wall in abaqus for simulation purpose, i have a question that should i select Deformable or discrete rigid in the type during creating part?
Brilliant, Magnificent.
Thank you Johnson, glad we can help!
Shouldn't density of steel be converted into N/m^3 ?
Thank you for your video, Please guide me how can I modeling Bridge and Dam ?
very good
very helpful
Is there any video continued from this ..thankyou
Hi Dawit, glad you found it helpful. Check out some of our How-To tutorials for Abaqus found on the 'How-To' playlist.
very helpful
thank you
Can you tell about increment and step module, how to define them and what do they physically signify in abaqus explicit
What about geometry steps that we create in assembly
Great explanation, thank you
Hi, can you explain me how to get compression values with the sign minus? this software give all the information about the stress always with the plus sign, why? A link to a page where there is this explanation is useful too. Thank you
Hi there, we encourage you to join the SIMULIA Community where you can connect with software users, experts and pose questions: go.3ds.com/YRy
I'm in my final year of mechanical engineering school and for my senior design project we need to simulate a golfers swing with and without our prosthetic design, can this software do that and or do you know of a software that would be best for the task?
Hi Brandyn, please reach out to our sales team with your specific question regarding the task at hand. Please note, there is a free version of our Abaqus software for University students. www.3ds.com/how-to-buy/contact-sales/
Can you please give information about modelling of gabion walls using abaqus?
THANKyou
what is the difference between tosca ad atom? it's the same thing?
I have installed it but I cant open the software. Please help.
Thank you for this.
I want to simulate a push with a stamp into a foil (deep-drawing). Which type for selected step is appropriate? (The movment should will be made by the stamp). Thank you!
Hi Matthias, we recommend joining the SLC and asking our community of Engineers on the 3DEXPERIENCE platform: go.3ds.com/SimuliaLearning
Hi, thanks. Great job.
If you use pressure for the load, can you plot the load-displacement curve? Or is it have to be from concentrated force? thank you.
Audio is a bit sharp hurts my ears but well explained I have had fea experience with ansys which is similar but needed a refresher
Why take half the weight of the barbell?
Where is the rest of the series, please?
great
Great video! well-explained! Can you explain the exaggeration part in the results? the multiplication with a factor to increase the deformation. Is it explained in any next video? If yes, kindly give the link thanks!
Hi Sana, Thank you for your input! We encourage you to join the SIMULIA Community, where you can join for free and pose additional questions to a community of SIMULIA engineering peers and technical experts. Here is a link to the community on Dassault Systèmes' 3DEXPERIENCE Platform: eu1-ds-iam.3dexperience.3ds.com/cas/login?service=https%3A//r1132100503382-eu1-3dswym.3dexperience.3ds.com/
@@3dsSIMULIA Thanks! will join :)
Amazing video, thank you. I was looking for some videos helping me implement damage in composite materials. Do we have those resources on internet too? I could not find them on your channel. Any lead would be appreciated, thank you.
Hi Aaditya, we invite you to join the SIMULIA Community, where even more tutorial content is available and you can network with peers and technical experts. It's free to join! www.3ds.com/products-services/simulia/communities/simulia-community/?SLC_en&
@@3dsSIMULIA Terrific, thank you. Shall be done!
sorry but the comand undo were is?
Thanks so much
thank's so much
Nice tutorial, and the next?
good
Mrc
Play at 1.5x, seems normal then!
Where is set B or other videos of playlist?
Thanks Pawan! We look forward to creating more tutorial content as well.. Stay tuned!