I don't understand why noone makes an ITX lenght 4070 series... it's between 180-220w and the stock pcb is already short, i don't get why MSI for example doesnt make an Aero ITX like they've been doing for years...
Great video, congratulations!! I have a graphics card just like that one. Do you happen to know the measurement of the thermal pads for this card? Best of luck to you!!” 🎥👍
Not sure why it says your temperature is so low. I have same card, with liquid metal and new thermal pads. Also have tried lapping, and still doesn't go below 77C on stock settings, maximum performance, Furmark stress test. Nice video editing anyways.
Although no official answers were found, the thickness of the appropriate thermal pad is as follows when looking at the reviews of the users who actually tested it. VRAM : 2mm VRM(MOSFET) : 1.5mm
This product is not a separate retail product, but a part extracted from a PC sold by HP. Of course, no warranty is provided for the extracted parts, and since there is no warranty, I disassembled and examined the inside.
IMO, OEM cards are more aesthetically pleasing than typical asus, msi, gigabyte etc.
3:40 와 언더볼팅 뭔가 엄청 간단하게 하시네요...
제가 가지고 있는 기가 비젼 3070에서도 되겠죠? 함 해봐야겠네요.
적용 가능수치에 약간의 차이가 있을수있습니다. (수율에 따라 다릅니다.)
I don't understand why noone makes an ITX lenght 4070 series... it's between 180-220w and the stock pcb is already short, i don't get why MSI for example doesnt make an Aero ITX like they've been doing for years...
Great video, congratulations!! I have a graphics card just like that one. Do you happen to know the measurement of the thermal pads for this card? Best of luck to you!!” 🎥👍
The VRAM is about 2mm thick, and the MOSFET is 1.5mm thick.
Thank you very much for this video. Do you know by chance what pin connector the fans are?
Not sure why it says your temperature is so low. I have same card, with liquid metal and new thermal pads. Also have tried lapping, and still doesn't go below 77C on stock settings, maximum performance, Furmark stress test.
Nice video editing anyways.
Depends on your case. Cold air to the fans, with enough fans exhausting should equal about 60-70c max temps
Mine goes to about 650 MHz on the memory clock msi other wise it crash the pc? Why?
Do you have a link to the 12 pin gpu connection that i can buy to use this card?
Thermal pad thickness? I havent been able to find official information regarding the HP version
Although no official answers were found, the thickness of the appropriate thermal pad is as follows when looking at the reviews of the users who actually tested it.
VRAM : 2mm
VRM(MOSFET) : 1.5mm
Question, if we open up the shroud and heatsink like this, it will void our card's warranty, right?
This product is not a separate retail product, but a part extracted from a PC sold by HP. Of course, no warranty is provided for the extracted parts, and since there is no warranty, I disassembled and examined the inside.
What type of connector does the graph have?
So can that card be compatible with other motherboards?
Yes, it worked properly on a motherboard from a manufacturer other than a DELL PC.
Can you review dell oem rx 6800 xt if possible?😅
If I have a chance, I will purchase it myself and review it.