You should have shown leaving the same parameters but lowering the "Hard" setting. I agree I keep mine on short duration and during sport it does 1 or 2 and sport plus it will do 3-4 it gets more aggressive depending how hard I'm gassing it as well. Bm3 on a g20 330i
I think it's still just a pinch too long. Mine are currently set to either 0.5 or 0.6s and I get 2-3 good pops on decel. I want to turn it down to where I just get a single pop after really giving it some beans. You're right about crazy burble tunes being annoying. They just make the car sound broken IMO. 2018 M3 CS MHD Stage 2, soft aggressiveness, 0.5 or 0.6s duration, min RPM 3200. Probably gonna try 0.4s and min RPM 4000 next Eisenmann downpipes AA single mid pipe (still waiting for the EL pipes lol) Factory MPE
@@derrickarmour Actually I still haven't gotten around to it lol. I have a really good camera and lav mic but no means to mount it. Lemme see if I can get my buddy to come for a ride and get some clips.
Would putting the setting as soft OEM do anything, have you tried that? I daily my 535 and I think it’s just uncalled for to be rolling around with the burples on the highest setting LOL just not my thing. This helped me and kinda gives me a happy medium.
I have the MHD burbles and find it super annoying. I wish I could go back to stock :( Even 0.5 seconds "OEM style" is embarrassing around town. The stock burbles are much quieter which I greatly prefer. Do you know of any way to run stock burbles with a MHD stage 2+ tune? Thanks!
Do you have anything modified other than the MPE? Like another Cat or Downpipe? Because if this all comes just from software, that would be amazing and definitive a reason to buy for my 140i ;) Greetings from Bavaria!
Yes!! I have a 4” catless downpipe! But I also have a resonator delete so keep that in mind. And thats awesome!! Have you gone to the Munich BMW museum?
Hey man I tuned my 2016 528i x drive with mhd and it didn’t work at all and my car is fully stocked and I was hopping on getting just the burbles but when I put it in sport mode nothing happens. Do you have any suggestions on how can I get the burbles
Hey, one question did you use the MHD soft for the burbles ? Its possible to setuped the burbles only for sport mode ? And keep it stock for the normal mode like for daily drives ? Thanks
Hey I just first heard about bm3 and I have bmw 428i and I just order catless downpipe and muffler delete so I was wondering how do I do that bm3 like I don’t understand about maps like what maps do I to click to get it and do I use phone to download it or I need to get cable to connect to computer to do that and thanks ! Hope you’ll respond back
Just got bm3 on my 330i. Either phone or computer works depending on which you want/buy. I got a stage 1 91octane map. All maps have custom options like burble sliders and cold start deleteb
Hi, nice video! I have a question, i want to use the MHD flasher but I don’t want to install Stage 1, i want to use only the settings to eliminate the Top speed limiter, enable the Cold start noise reduction, keep the exhaust flap always open, and enable the Start-up roar... is it possible to do this alone? Thanks for your time to clarify this. (440i gran coupe 2017 B58 owner here)
@@jacks.8755 Really? But are you sure about this? In my case then i need to run stage 0+ because i have MPPK... so, i need to purchase only the license and i don’t need to purchase the extra license for stage 1 or 2...
@@jacks.8755 ok i have confirmed this! Only the initial license (not super license) will allow me to flash all the options and keep my power kit tune! and that’s exactly what i want! 👍🏻😁 thanks for your answer Jack! I really appreciate your time to respond me. wish you all the best and Merry X-mas 👋😎
I want burbles on my 2006 330xi but they don’t make a mhd for it I’m pretty sure u know anything I can do like another chip for my car Bc I’ve heard tunning it will be expensive
@@f32matt28 so where do I go to buy the licenses or the backend tunes ? I’m getting ready to go fbo so I wanna switch over to mhd i also like the burble
Hey man did burbles turn on automatically after the flash during your drive? I just reflashed my car after getting a down pipe but they won’t even activate anymore beside the stock burbles.
@@JoelEnc hey bro i found the fix and put the burble on the same settings as you want for sports mode. it’ll activate after. at least it worked for me on MHD. Let me know bro hope it helped I was under stress cause I missed them 😂😂😂
@@f32matt28 Oh nice. I currently have a stock f32 b58 and I am going to buy the MPE + a VRSF catless dp + Bootmod3 stage 2. Could not be more excited to feel the power and hear those gunshots
@@oneway0418 probably not a good idea though with stock downpipes. Get catless downpipes if you want pops and bangs and don’t wanna ruin ur exhaust lolll
Hello, my bf has a 2011 bmw e90 335i. He tuned his car in March and he took the tune off in April due to his car throwing a check engine light so he thought it was because of that. So, we’ve been trying multiple times since April to put the tune (MHD) back on. We have tried many attempts and different ways to put the tune back on, but it won’t work. Do you have any suggestions or like a person he can talk to? It would be very much appreciated because we miss the pops.
Dont set it to Medium or Hard with stock dp. Duration almost does not matter you just destroy and rape your dp.. Even with 300cell aftermark dp, no opf and burbles set to soft 0,8s it will destroy your dp. We dealt with lot of issues regarding this…
Bro if you think soft is the best setting, then why didn't you change it to soft so we can hear it. I don't like hard. But I might like a soft. Play a sample of that... I have an E92 M3 and am considering it...
Hey guys, I’m still new to bmw’s, just got a 650i 2016 with the m kit and I want the car to be as stock as possible, it burbles a bit but not enough , I want aggressive burbles , I don’t want to tune it through a garage cuz it would be quite expensive, will the mhd app work? If not are there any other alternatives as easy as this? 2016 f06 650i v8 twin turbo (n63tu)
My friend had a 2008 325i straight piped and it honestly sounded decent because it is still a inline 6 and in my opinion bmw makes the best sounding straight 6 engines
N55 sounds so good
You should have shown leaving the same parameters but lowering the "Hard" setting. I agree I keep mine on short duration and during sport it does 1 or 2 and sport plus it will do 3-4 it gets more aggressive depending how hard I'm gassing it as well. Bm3 on a g20 330i
Completely agree with you. Sounds much better with just the one or two pops.
A tru car guy never would say “I think it’s good how it’s is” na yeah thing sounds mint asf tho
0.5 seconds is perfect, you're right!
I think it's still just a pinch too long. Mine are currently set to either 0.5 or 0.6s and I get 2-3 good pops on decel. I want to turn it down to where I just get a single pop after really giving it some beans. You're right about crazy burble tunes being annoying. They just make the car sound broken IMO.
2018 M3 CS
MHD Stage 2, soft aggressiveness, 0.5 or 0.6s duration, min RPM 3200. Probably gonna try 0.4s and min RPM 4000 next
Eisenmann downpipes
AA single mid pipe (still waiting for the EL pipes lol)
Factory MPE
Have you tried 0.4 secs with min 3000rpm ? Would love a sound clip if you have one
@@derrickarmour Actually I still haven't gotten around to it lol. I have a really good camera and lav mic but no means to mount it. Lemme see if I can get my buddy to come for a ride and get some clips.
I use soft one second @ 2000 Rpm on my f20 118i
@@IKenKaneki Way too much IMO. You'll be popping and banging all day at any application of throttle.
I do like this setting much better than what most people do which is burble for 2 seconds or more
That we have to unplug the mhd after installing, or keep plug in? Thanks
Would putting the setting as soft OEM do anything, have you tried that? I daily my 535 and I think it’s just uncalled for to be rolling around with the burples on the highest setting LOL just not my thing. This helped me and kinda gives me a happy medium.
Hell yeah!! Soft is the way!
Yo video was blast dude! I have one question tho… will mhd work with n46 engine from e46?
It will not!
Yeah thats perfect!!! Some ppl just be so obnoxious with it making us bmw heads just look bad 🤦🏽♂️🤦🏽♂️
2:10 I know exactly what you mean because my bimmer doesn’t have a tune but pops just like your car
That first clip is gold lol
I was processing 😂😂
@@f32matt28 *windows boot sound*
What app is that
a little new to cars, i’ve got a 535 with a muffler delete. would this work for me or?
What year 535 is it?
Sounds good man
Where can i purchase this Plug in Burble Tune for my 2014 F30? Thanks!
MHD!!!
Would it work on a 2018 330i bro?
And which OBD did you use?
Following
Yes!!
Medium or soft is where you want it. I have mine on medium because I still have a muffler and resonator but I’m catless
I’m thinking about running this same burble tune but all i have done is a muffler delete, is this a bad idea?
I have the MHD burbles and find it super annoying. I wish I could go back to stock :(
Even 0.5 seconds "OEM style" is embarrassing around town. The stock burbles are much quieter which I greatly prefer. Do you know of any way to run stock burbles with a MHD stage 2+ tune? Thanks!
You can turn them off completely in settings my friend
Soft is much quieter than OEM for my m140i. Inside the car I don't hear it at all.
Just an update to anyone else wondering, turning them "off" in the app actually doesn't turn burbles off. Rather, it uses OEM burbles.
Do you have anything modified other than the MPE? Like another Cat or Downpipe? Because if this all comes just from software, that would be amazing and definitive a reason to buy for my 140i ;) Greetings from Bavaria!
Yes!! I have a 4” catless downpipe! But I also have a resonator delete so keep that in mind. And thats awesome!! Have you gone to the Munich BMW museum?
Hey man I tuned my 2016 528i x drive with mhd and it didn’t work at all and my car is fully stocked and I was hopping on getting just the burbles but when I put it in sport mode nothing happens. Do you have any suggestions on how can I get the burbles
Do you have a stock exhaust?
@@f32matt28yes nothing in my car is modified everything stock
Hello friend! What is the name of this application and name of obd2? This is carly?
MHD!!
Is there a way to adjust the burbles and crackles without a tune? Anything in bimmercode?
Unfortunately not, cars engine gets tuned by these softwares for the burbles itself its to do with injecting fuel hence the ecu tune is needed.
Hey nice Video. What are you using to connect your USB Port with your mobile?
Its a bimmersense wifi agent!!
Hey, one question did you use the MHD soft for the burbles ? Its possible to setuped the burbles only for sport mode ? And keep it stock for the normal mode like for daily drives ? Thanks
yes if you turn the drive setting to none it shouldn’t burble in regular mode,but it will burble in sport mode that how i currently run mine!
What should I get to get pops from my 04 330ci? All I have done to it is a muffler delete, planning on getting resonators deleted soon aswel.
I think a custom tune if you want a bunch of pops tbh
Hey I just first heard about bm3 and I have bmw 428i and I just order catless downpipe and muffler delete so I was wondering how do I do that bm3 like I don’t understand about maps like what maps do I to click to get it and do I use phone to download it or I need to get cable to connect to computer to do that and thanks ! Hope you’ll respond back
I have bm3 it’s a little different but you will need the cable unless you have the WiFi agent
Also have a muffler and res delete but catted dp
Just got bm3 on my 330i. Either phone or computer works depending on which you want/buy. I got a stage 1 91octane map. All maps have custom options like burble sliders and cold start deleteb
Hi, nice video! I have a question, i want to use the MHD flasher but I don’t want to install Stage 1, i want to use only the settings to eliminate the Top speed limiter, enable the Cold start noise reduction, keep the exhaust flap always open, and enable the Start-up roar... is it possible to do this alone? Thanks for your time to clarify this. (440i gran coupe 2017 B58 owner here)
Yes you can do that but you need to purchase a license
im not sure if you got it done yet but if you purchase just the license i think you can run stage 0 and it allows u to add burbles
@@jacks.8755 Really? But are you sure about this? In my case then i need to run stage 0+ because i have MPPK... so, i need to purchase only the license and i don’t need to purchase the extra license for stage 1 or 2...
@@jacks.8755 ok i have confirmed this! Only the initial license (not super license) will allow me to flash all the options and keep my power kit tune! and that’s exactly what i want! 👍🏻😁 thanks for your answer Jack! I really appreciate your time to respond me. wish you all the best and Merry X-mas 👋😎
@@technopro-kz4xv Im glad i can help man, Happy holidays from Las Vegas!
Do you know the perfect setting for just having one loud pop? Maybe 0.4-0.3 seconds with max aggressiveness?
I’d definitely say .5 or under if you can with the medium to high
What app is that? Can you make new map through this app?
MHD!
Is there a something like MHD but for Mercedes ?? Thank you
I would not know honestly but im sure theres some decent options
1 sec would be the perfect sweet spot honestly ❤️
No it wouldn't
what plugin do you have?
I want burbles on my 2006 330xi but they don’t make a mhd for it I’m pretty sure u know anything I can do like another chip for my car Bc I’ve heard tunning it will be expensive
If you delete some parts of the exhaust and tap the gas it should pop!
Work in a 420d? If not please give somthing el se to make my car burbels
I don’t think so :(
What are u using to tune? Would it work on 2011 e90 328i
Sadly mhd doesn’t offer tunes for the n52, I thing that’s in the 2011 328i.
So I have jb4 I’m looking to get into mhd so for me to run both I have to do mhd backend tunes and flash
Yes correct
@@f32matt28 so where do I go to buy the licenses or the backend tunes ? I’m getting ready to go fbo so I wanna switch over to mhd i also like the burble
To set the burbles, do we need to flash the car again, or can we do it without flashing the ECU again ??
you gotta flash it again
Do you think if I put my MHD burbles on the soft setting it will hurt my turbos or engine?
No, i used it for a year on soft with no change in exhaust from stock, when taking the cat out 0 dmg.. with 1.5 secs burbles too
Does the MHD Tuning app work with a 335i F30?? Nice vid bro
also is there any point in doing this to a completely stock exhaust and engine? will it add sound?
Yes! And no it wont add extra sound except for pops if you choose that option
Is it posible with MHD only put po bang on sport and sport + mode? Example to car will be like stock on comfort mode??
Yeah it won’t burble if you don’t want it to in normal
@@f32matt28 okey. Thanks mate... your video is awesome..
Duration setting is 0. Do you have any burble in Comfort Mode? Thanks you.
I have no burble in comfort mode, they are only set at .5 in sport!
@@f32matt28 thanks you
nice video where did u get your interior carbon from?
Thx!! They are overlays, the previous owner bought them, I’m sure I can find a link I cant think of the company
What kinda bmw is this and what app did U make the burbles on?
435i, and its mhd
Hey man did burbles turn on automatically after the flash during your drive? I just reflashed my car after getting a down pipe but they won’t even activate anymore beside the stock burbles.
bro same thing happens to be on bm3 i dont know the issue but my car doesnt make the loud pops anymore
@@JoelEnc hey bro i found the fix and put the burble on the same settings as you want for sports mode. it’ll activate after. at least it worked for me on MHD. Let me know bro hope it helped I was under stress cause I missed them 😂😂😂
@@onlybooza so put the regular burbles as the sport? I’m gonna try it tmrw
@@JoelEnc yes bro, try it tmr and you’ll see let me know how it goes
What kind of mhd license do i have to need for this ?
I love the sound of the MPE. Do you have a stage 2 tune?
Me too!! And yes currently
@@f32matt28 Oh nice. I currently have a stock f32 b58 and I am going to buy the MPE + a VRSF catless dp + Bootmod3 stage 2. Could not be more excited to feel the power and hear those gunshots
That will sound amazing!!! The initial first reaction is the best 😂
@@icySn1p3sZ47 tbh go with mhd rather then bm3
@@icySn1p3sZ47 loving my vrsf catless but im running MHD... so quick
Me with 2.5 seconds on hard with straight pipe N55 🤡
you think it would be good for 528i 2010?
No sir!
Is it bad for the turbo, on n54 its not good for the turbos seals
do yk if it could pop with the full stock exhaust on the car?
Yes
@@f32matt28 apperciate it thank u
@@oneway0418 probably not a good idea though with stock downpipes. Get catless downpipes if you want pops and bangs and don’t wanna ruin ur exhaust lolll
@@xprincy true
Wait what did you use to tune your car? Cuz I’m tryna tune mine but I don’t know what to do I’m a rookie
MHD Tuning! Its an app you can download on IOS and Andriod! You just need a wireless dongle from Colorado N5X! Highly recommend his site!
@@f32matt28 I’m from Colorado and can confirm Bryan is top notch 💯👍🏽
what coding program do you use?
Its called MHD Tuning for IOS and android
This is the exact car I want except in satin black
Hello, my bf has a 2011 bmw e90 335i. He tuned his car in March and he took the tune off in April due to his car throwing a check engine light so he thought it was because of that. So, we’ve been trying multiple times since April to put the tune (MHD) back on. We have tried many attempts and different ways to put the tune back on, but it won’t work. Do you have any suggestions or like a person he can talk to? It would be very much appreciated because we miss the pops.
Hmmm thats interesting, have you tried to email mhd services?
Hey I want to slap on a tune on my f48 x1, it has a b48, would I be able to?
Absolutely
so my dad has an x5 2013 m sport 35i if he gets stage 1 tune would it have the burbles?
Yes you can adjust it how you want
Dont set it to Medium or Hard with stock dp. Duration almost does not matter you just destroy and rape your dp..
Even with 300cell aftermark dp, no opf and burbles set to soft 0,8s it will destroy your dp. We dealt with lot of issues regarding this…
What if your car is completely stock and you have a resonator delete will the burbles still work ?
@@Reallydiorrr if by work you mean they sound, yes they will appear. But wouldn’t recommend it on a stock catalytic converter
0.2 secs will give you a single pop. I prefer this myself
is it on stock exhaust ? or you have changed the exhaust
it looks like he is running the AWE exhaust
how is the turbine? hurting popcorn turbine?
i just noticed u don’t have the BRAP setting
Yeah, this was before that came out
what is this app? and will it work on f20 with n13 motor straightpiped with a valve?
I believe it works for N13’s, I can’t remember for sure
@@f32matt28 where can i buy it?
Did you have to unlock your DME for MHD to work on an N55 set up?
Definitely not on the F chassis, I know a guy who had to on his 1 series with an n55
@@f32matt28 do you remember the year?
@@allenhustler what chassis do you have? I could help you out if needed.
Please tell me..
Will this app work on a 82' Trabant 601 deluxe?
Yea it’ll give you an extra 500HP no question
@@f32matt28 thanks mate
Bro if you think soft is the best setting, then why didn't you change it to soft so we can hear it. I don't like hard. But I might like a soft. Play a sample of that... I have an E92 M3 and am considering it...
What kind of carbon fiber trim do you have?
They are overlays! Im not sure where the previous owner got them but they look really nice, they compliment the interior well
What are app are you using
MHD!
Perfect about to set mine too.
how is your idleing sound so loud?mine barely have any noise
The waste gate was probably open
@@f32matt28 how do you open it?
Mine isn’t burbling when I tuned it could it be because I’m on stock downpipes
Hmm is it a fully stock?
Fucking love you’re 435
Thank you dude!!!
Why not just use cold start delete if you think it's loud? I did it and so much better
It kinda makes my idle funky so I haven’t turned it back on 😂
@@f32matt28 oh really that's weird
sick vid
Thank you! :)
What is it called ? Want to buy one
MHD! And bimmersense wifi agent
Will this work on my m235i
Wat exhaust u have
What colour wrap is that?
Gloss storm grey
I hate burbles. So annoying. I have a 2021 m2 comp and couldn’t wait to code it out. Couldn’t do it fast enough. Sounds nice now
Did someone drop you on your head? Multiple TIMES?
@@porschedude996TT You good buddy?
Perfect!!!!!
Enjoy :)
Hey guys, I’m still new to bmw’s, just got a 650i 2016 with the m kit and I want the car to be as stock as possible, it burbles a bit but not enough , I want aggressive burbles , I don’t want to tune it through a garage cuz it would be quite expensive, will the mhd app work? If not are there any other alternatives as easy as this?
2016 f06 650i v8 twin turbo (n63tu)
You can do some exhaust work to amplify the burbles
@@f32matt28 exhaust work as in? Take out the mufflers ?
@@rayyan6606 Yeah or simply just the resonators!
That all you have done to the car?
I had a few bolt ons
I get the same effect with fast food 🍔
Mcdonalds specialty
What tune do you have?
MHD!
Perfect bro
When I click tune my map is stuck on v1.08. how do I get the version to change. Please help!!
I would definitely contact mhd about that but also check if your app has been updated!
1.08 is the newest ots version.
Does this work on a 2013 528i xdrive
Yes it does, theres support for the N20
Can you go back and change the setting?
Yes
This work on a 2015 328?
I believe so!
Do these burble settings work on a stock exhaust of 328i f30?
Yes
They won’t be as loud though
I need to find out how to do this on my dads estate bmw
Buy MHD! It will work if its a 328 wagon or 330 wagon
What is the name of the device
Mhd wifi agent
Will this work on my e46 and how do I get it ?
No it will not!
What’s the app called
MHD
hi, would this work on a e92 325i
It would not
Wonder how my 2006 325i would sound straight pipe
My friend had a 2008 325i straight piped and it honestly sounded decent because it is still a inline 6 and in my opinion bmw makes the best sounding straight 6 engines
Are u from the ATX area?
Yes!
@@f32matt28 haha, I’m moving to lakeway soon and was just wondering because it looks very familiar
@@justinwallace3848 Yeah I’m over here also! Its a super nice area you’ll love it
@@f32matt28 haha I’m here rn, weather is crazy haha
Can i do this with my stock 528i?
Yea just stage 1 though
If its an N20/26
2 pops isn't burble. Burble is for 1-3 sec and very low aggression.