@@rekoking2561 We show in the video the reverse wire as gray wire in the same connector 3:03 minute in the video. Depend on your camera wire some has a spare power wire to allow extending the reverse from the rear to front and vice-versa you can also tap in the back of the vehicle or on one of the kick panels (need to check based on your vehicle information)
Just about to do this with my venza in the next few days. To clarify, im fine having the image on both screens, so I don't need to mess with the reverse wire at all. Just tap into the positive and ground of the camera, and the reverse detection and power of the camera will be handled by the module in the upper screen? Then the head unit will detect the camera has been powered on? Thank you!
Can you please send a picture of the universal rca cable you spoke about yo connect to the red and white wire? What is the camera connections behind the aftermarket headunit? Thanks for your help
So one minor thing he doesn't mention is that you have to tap into the gray wire to the reverse wire on your aftermarket radio so the unit knows to switch to the backup camera. Otherwise, the wires he points out in this video works with a new aftermarket unit.
Hi, If im upgrading from the original radio to the touchscreen gps oem radio will I still need to tap into those wires up at the top screen to get the reverse camera to work? Thanks and great video!
Hi. Sorry I did not do a video on the actual connection. When we have one we will post it but the install is fairly simple, you can call our office and ask for me (Ron) and I can try to help you over the phone. www.carsystemsinstallation.ca/contacts/
Thank you brother...this is the exact info I need!
Excellent instructions, best I've found on the net. Worked on my 09 Venza. Thanks!
So do you have to tap into the reverse wire as well in to new unit or you just taped video positive and negative wire only ?
Yes you need to trigger the reveres wire on the new radio unit you use to allow the unit screen to change to the reverse camera mode.
I didn't see where you guys tapped it in to the units reverse wire was that in a different location
@@rekoking2561 We show in the video the reverse wire as gray wire in the same connector 3:03 minute in the video. Depend on your camera wire some has a spare power wire to allow extending the reverse from the rear to front and vice-versa you can also tap in the back of the vehicle or on one of the kick panels (need to check based on your vehicle information)
@@caraudiotoronto do you guys remember where you connected the reverse wire to
I tried and tried and I can not get my radio to connect with the camera Sucks that you can’t see the exact wires that were used
Just about to do this with my venza in the next few days. To clarify, im fine having the image on both screens, so I don't need to mess with the reverse wire at all. Just tap into the positive and ground of the camera, and the reverse detection and power of the camera will be handled by the module in the upper screen? Then the head unit will detect the camera has been powered on? Thank you!
Is there any plug and play adapter that you can buy ?
Can you please send a picture of the universal rca cable you spoke about yo connect to the red and white wire? What is the camera connections behind the aftermarket headunit? Thanks for your help
Hello
What cable do U use? A RCA??
what toyota back up camera retain wire harness was used?
There is no wire harness that is why we show in this video how to hardwired the camera
Is this also worked for Highlander ( think same head unit)?
So one minor thing he doesn't mention is that you have to tap into the gray wire to the reverse wire on your aftermarket radio so the unit knows to switch to the backup camera. Otherwise, the wires he points out in this video works with a new aftermarket unit.
Hi, If im upgrading from the original radio to the touchscreen gps oem radio will I still need to tap into those wires up at the top screen to get the reverse camera to work? Thanks and great video!
Can I get in contact with you. I need to install touchscreen radio with backup camera for my 2009 Venza pls
Hi
Yes please call our office 4165519299 or email carsystemsinstallation@gmail.com
Hi,
My camera does not show up on my new aftermarket dash
I'm a NEED TO SEE you do it type person. Can you do a video showing and actual HOW TO, and not a HOW YOU do it? Please. Thank you
Hi. Sorry I did not do a video on the actual connection. When we have one we will post it but the install is fairly simple, you can call our office and ask for me (Ron) and I can try to help you over the phone. www.carsystemsinstallation.ca/contacts/