Helpful tip: When installing the cooler clips, loosen the 4 screws holding the bracket on the motherboard a bit. The extra slack allows the clamps to grab the tab easier. Tighten the 4 screws back down, and clamp the cooler.
Thanks man. You gave me the strength to hit down that "lever" for the CPU fan. Shit scared to do it. Sat here for 1h trying to find a solution. Found you, saying : "a little presure is ok" Skipped a beat when it went in. Thanks again.
@@BCcasa Was the same feeling for me when I did it, thought oh man this might not go well lol...thankfully it made all the difference and was much easier when I did...Thanks...
DENNIS!! I had been so scared to do my first build. It was a dream of mine. I got all my parts and was going to build with a friend, but my wife caught a cold so we're being extra careful and doing full quarantine. I decided to do the build on my own. I figured I'm an attorney, im a smart guy, I can do this. I ended up being so anxious and terrified of breaking things. I went from video to video for help but found them too hard to follow. But your AMD CPU installation was by far the easiest and friendliest for me. You've made me a fan for life. Thank you, Dennis!
Thank you so much for the installation guide! I was so scared when trying to push the black lever b/c it's REALLY TIGHT, I had the feeling that it would just snap if I put any more pressure on it... this took me a few attempts and finally succeeded. Now everything works perfectly fine, and I'm quite happy with this beautiful cooler :)
If you turn the cpu cooler and make the usb side facing topside, u can take the cable behind the motherboard and connect at the bottom. #cablemanagement
Yep, never thought about that, was more concerned for being able to get at the settings, which now I don't even care about, appreciate the advise...Thanks...
Thank you very much, this helpped me so much. I had no idea what those additional cables were that came with the cpu and I didn't have it tighted all the way! Keep up the great work!
I've had a couple that did report it breaking but it's likely they forced it a bit to much, or was defective, I found once a bit of pressure was applied then it worked great...something the manufacturer should mention for sure...Thanks...
Great video. Thank you for explaining everything in a simple way so that even non-computer experts can understand. I could not figure out for the life of me why I was not able to adjust the AMD Wraith Prism lighting through the CM software. But now I know it is because when I had my PC built the RGB cable was connected.
Sir. I don't know who you are but God bless your soul. Seriously, I was stuck with a really crappy cooler and figured to use wraith cooler instead. You're a great teacher and restored my confidence in pc building.
You are the only channel that show you must connect the usb rgb cable in order to control the rgb on the cpu cooler and NOT the other one. (on the Gigabyte X570 mobos) You helped me A LOT, thanks.
Thank you so very much for making it by my channel, Dennis. Watch time is important to us all (even though it looks like there are a lot of views on this video!), and so I am always happy to return the love with a play *_in full_* (12 minutes) and a big like #187 from Bits of Real Panther! A new week finds us again. May yours be one truly epic, friend!
Thank you for sharing bro I don't really understand this kind of stuff but it's giving me an introduction anyway thanks again God bless Ken and thanks for being a part of my community at means a lot
I just bought the 3800X and it was delivered today. I am glad I watched your video, because I am of the opinion more information is better than none. I would not have been familiar with all those connections. Most guides just say, "Here's your connectors, so just connect them up."
Yeah that's always been a goal for my channel is to show all the connectors, and not to skip over things like a lot of others seem to do, I think they assume people already know but that's just not the case most time, so I'm very happy this helped you out...Have a fantastic day...
"Don't be afraid, it's not going to break or anything", well mine did earlier this evening, the plastic lever snapped off the metal pin. Not only was it incredibly tight, therefore requiring a huge amount of force, but it's also made out of really weak plastic.
@@Reviewing_Playing_and_More_RPM I'm taking it back on Monday and demanding a replacement, then I'll attempt to fit it there and then in the store, if it breaks again they will have to replace it again without me having to make another trip back to the store.
@@GoneToHelenBach Yeah, for sure, it should go down without issue, so I'd go so far and taking my motherboard and thermal paste and have them install it to make sure...that way if it breaks it all on them for certain...All the best...
@@Reviewing_Playing_and_More_RPM Yeah, if they will agree to fitting it for me, then I'll happily let them do it so it puts the onus fully on them if it breaks. I still can't quite believe that I've spent more on my PC build this time around, with the intention of getting higher up the PC 'food chain' than I did last time, yet I'm sat here typing this out on the PC that I built more than six years ago because a new component broke.
@@GoneToHelenBach Yeah, it's not good when parts fail us, it's the first time I've heard of this happening, sorry it had to be you, let me know how things go, take care...
Yeah didn't have time to do as much as I like to in this one, usually do the Temperatures and run some benchmarks guess that'll be another video lol...Thanks for checking it out...
Thank you!!! That was very helpful. I just built a PC and was struggling to find how to control the wraith prism RGB. Your video is very comprehensive. I also got to know about the high/low switch.
Your tutorial made that installation very easy, I held off from the cpu cooler installation till last as it seemed jarring, but watching the installation process a few times and it was a breeze
Good video. Found out where to put that extra wires in the CPU box. Noticed the rubber by accident feeling around the fan...LOL. So, looked it up and found you! Thanks.
lol that's me a gangster hehe...glad the video helped you out, funny thing is I just did an acting part where they played me as a Head of a Mob and with a youngster trying to replace me lol...Have a great day...
i thought i was watching a video with Bubbles from Trailer Park Boys. Thanks for this indepth look at the cooler, does anybody know if this will fit a socket 939 motherboard?
Excellent tutorial! This reminds me back an IT Tech class in college which was my last and final class before I graduated and got my Master's certification of computer system support class of 2009.
It will still work, but not as good a seal, so temps won't be great, you could try again using a pair of pliers and slightly more downward pressure to make it easier, or try to RMA it...sorry yours broke...have a good day...
@@Reviewing_Playing_and_More_RPM After I was able to crack open my case I gotta changed "this solved it I think" to "this solved it. period." thanks again.
Will it work with msi a320m pro e, i dont have a rgb header, do i need one or can i control it with the software? And why did you plug it in the usb slot ?
Your MB from what I know of it will only work with the 2000 Series CPU's, not sure if there was an update for the 3000 series, you have to do some searching as it doesn't seem so...as for not have a RGB Header, as mentioned in the video I don't use the RGB Cable I only use the USB cable, and the Wraith Prism Software to control the colors...Hope that helps a little...Thanks...
This will sound dumb, but when I opened mine I was worried about the part that (to me) seemed loose that you discussed at 1:50. Thanks for the vid! I'm not the most knowledgeable on hardware and all
Glad you liked it, much appreciated...when I started a couple years ago, I had a lot to learn as well, it's hard to keep up with all the different changes...Thanks...
Informative video, thanks. I installed two of these around 3-4 years ago on top of the 3700x (2 systems). Now I'm wondering about upgrading to a 5950x and keeping the Prism as my cooler.
Gosh this was really helpful! I was wondering why my cpu cooler could not access/ connect to the cooler master software and then i saw that i was missing the usb cable... thanks for the vid :)
Hi there. Love your dedication for this channel. I have a question, if I just plug in the pwm header for the fan, can I use the mobo software as a rgb controller? Or should I connect the USB or motherboard cables to the cooler? Thanks.
The PWM Fan for the CPU Cooler if that's what you mean then no, it will only control the Fan on the CPU Cooler, the USB cable with the Wraith Prism Software will let you control the CPU Cooler colors, the Motherboard software will do all the other RGB in your system...there might be a way to do it otherwise but not sure how as it seems to be something that doesn't work for most...wish I could offer more...but hope that helps some...
Another way to put an AMD correctly into the socket is, if you haven't noticed yet, is that the word "Ryzen" is always upside down if you look from the memory slots.
excellent, came here to see if I needed those LED / USB cables and had a preview of how all that would fit in the motherboard before doing anything. What else could I ask for? Thanks for your time filming this :-)
Fun Merry Christmas Eve Dennis thank you for sharing your knowledge with us taking us along ice playlist keep up the great work God bless you, keep an eye on your watch time 5 for your friend Ken, God bless you!!
Hi nice video and tutorial, explained everything beautifully. One question for the usb cable. I want to use the rgb cable so i can sync with aura sync. Would I lose too much if I don’t use the usb? Thanks!
I wasn't able to get my Motherboard Software to work with the RGB Cable, but you can give it a try and if it doesn't work, then you can go ahead and use it the USB way with the Wraith Prism Software...If it works you will have the same functionality and won't be missing anything...Thanks...
The camera kept going out of focus for some reason, but it was just a short time so I took it out, it still shows the CPU going in, so not sure why it matters but there's your answer...Thanks...
Hi great video if you don’t use the usb does this mean it will still light up raindoe but just won’t have control ??? Or do you need the usb for it to light up ? Thanks :)
If you don't use the USB you won't have control of the colors, but you will have the default colors...with the USB you can control all the colors individually using the Wraith Prism Software...Thanks...
Cool! tks man! My only doubt is about the memory modules. I have a exactly motherboard like yours, and I will build my pc this week. Should I install the dimm modules before or after install the Wraith Prism Cooler? Tks for the tip.
I typically put the Memory in after installing my CPU and CPU Cooler, there is lots of clearance after the CPU Cooler is on, so there won't be any issue's...
Helpful tip: When installing the cooler clips, loosen the 4 screws holding the bracket on the motherboard a bit. The extra slack allows the clamps to grab the tab easier. Tighten the 4 screws back down, and clamp the cooler.
Will have to test that out, appreciate the tip...Thanks...
Just bought one of these im gonna try this out thx
You are a genius thanks! I tried it and it worked
Thank you greatly, I thought I was about to break my board trying to get that thing on with them tightened
Eventually those metal straps will bite into the plastic tabs and can even fail. You won't know until temps go through the roof one day.
Thanks man. You gave me the strength to hit down that "lever" for the CPU fan.
Shit scared to do it. Sat here for 1h trying to find a solution.
Found you, saying : "a little presure is ok"
Skipped a beat when it went in.
Thanks again.
Glad it helped, enjoy your new Build...Thanks...
Same here, just installed a new dev machine and ran into the same problem.
Had the same feeling! Its so strange to put force into the cpu!
@@BCcasa Was the same feeling for me when I did it, thought oh man this might not go well lol...thankfully it made all the difference and was much easier when I did...Thanks...
yeah same have had the cpu for like 2 months without the lever and now my pc is suddenly quieter
Just wanted to say this is going to make me upgrade slightly less anxiety inducing, thanks so much!
Glad it helps...Thanks...
DENNIS!! I had been so scared to do my first build. It was a dream of mine. I got all my parts and was going to build with a friend, but my wife caught a cold so we're being extra careful and doing full quarantine. I decided to do the build on my own. I figured I'm an attorney, im a smart guy, I can do this.
I ended up being so anxious and terrified of breaking things. I went from video to video for help but found them too hard to follow. But your AMD CPU installation was by far the easiest and friendliest for me. You've made me a fan for life. Thank you, Dennis!
Much appreciated, always happy when I can help others out...enjoy your new built PC...
yes this helped me a lot
Glad it helped...Thanks...
You make it look easy Dennis! As always, those are some great tips with installing it too, especially with the USB and RGB plug!
Thanks man, I'm sure with your skills you could do it easy...
6:33 Yes it did. Exactly what I needed. Thank you!
Your very welcome...Thanks...
You single handedly gave me the confidence to push that lever down, you now have a new subscriber my friend.
Awesome! Thank you!
Thank you so much for the installation guide! I was so scared when trying to push the black lever b/c it's REALLY TIGHT, I had the feeling that it would just snap if I put any more pressure on it... this took me a few attempts and finally succeeded. Now everything works perfectly fine, and I'm quite happy with this beautiful cooler :)
Glad it helped you out...Thanks...
This was a pretty extensive video. Covered everything I needed to know about the cooler. Thank you!
Glad you liked it, Thanks...
If you turn the cpu cooler and make the usb side facing topside, u can take the cable behind the motherboard and connect at the bottom. #cablemanagement
Yep, never thought about that, was more concerned for being able to get at the settings, which now I don't even care about, appreciate the advise...Thanks...
That's what I did accidently lol. Happy to see that someone made that on purpose.
but the AMD logo would be upside down no?
@@bearabletable7527 it would be yes lol
Daniel Hollembaek toggles my ocd to do it that way.
Thank you very much, this helpped me so much. I had no idea what those additional cables were that came with the cpu and I didn't have it tighted all the way! Keep up the great work!
Glad I could help, you have a great day...
This video gives me a lot more confidence. Look great, love your overall setup at the end.
Glad you liked it, appreciate the comments...Thanks...
Thanks for the vid wasnt sure If I was gonna break the cooler lever .
I've had a couple that did report it breaking but it's likely they forced it a bit to much, or was defective, I found once a bit of pressure was applied then it worked great...something the manufacturer should mention for sure...Thanks...
Great video. Thank you for explaining everything in a simple way so that even non-computer experts can understand. I could not figure out for the life of me why I was not able to adjust the AMD Wraith Prism lighting through the CM software. But now I know it is because when I had my PC built the RGB cable was connected.
Glad to help...Thanks...
Hey man, thanks for explaining how to secure the heatsink. It was really helpful. 😀
Very happy to help...Thanks...
Thanks this made upgrading a LOT less stressful as it's been about 8 years since I last did a build
Glad it helped, Thanks...
I was having such a hard time with the cooler, used to Intel fans... you helped me figure it all out so thank you so much!
Your very welcome...Thanks...
Sir. I don't know who you are but God bless your soul. Seriously, I was stuck with a really crappy cooler and figured to use wraith cooler instead. You're a great teacher and restored my confidence in pc building.
You are very welcome, appreciate the great comment...have a fantastic day...
You are the only channel that show you must connect the usb rgb cable in order to control the rgb on the cpu cooler and NOT the other one. (on the Gigabyte X570 mobos) You helped me A LOT, thanks.
Very happy to have helped you out...have a great weekend...
Good review and install Dennis. Have a great week,👍
Hey John, you have a great weekend as well...Thanks...
Thank you so very much for making it by my channel, Dennis. Watch time is important to us all (even though it looks like there are a lot of views on this video!), and so I am always happy to return the love with a play *_in full_* (12 minutes) and a big like #187 from Bits of Real Panther!
A new week finds us again. May yours be one truly epic, friend!
You have a monumental week as well man...Thanks...
Thanks, Dennis. I will try!
Thank you Sir for your guidance and soothing voice! You made this CPU and AMD Cooler installation such a great experience!
Glad you enjoyed it! Thanks...
My boy came in clutch awesome video 👍
Thanks, much appreciated...
Thank you for sharing bro I don't really understand this kind of stuff but it's giving me an introduction anyway thanks again God bless Ken and thanks for being a part of my community at means a lot
Glad you checked it out...Thanks...
I just bought the 3800X and it was delivered today. I am glad I watched your video, because I am of the opinion more information is better than none. I would not have been familiar with all those connections.
Most guides just say, "Here's your connectors, so just connect them up."
Yeah that's always been a goal for my channel is to show all the connectors, and not to skip over things like a lot of others seem to do, I think they assume people already know but that's just not the case most time, so I'm very happy this helped you out...Have a fantastic day...
"Don't be afraid, it's not going to break or anything", well mine did earlier this evening, the plastic lever snapped off the metal pin. Not only was it incredibly tight, therefore requiring a huge amount of force, but it's also made out of really weak plastic.
If it broke by just flipping the lever, I'd return it because that should not happen...sorry to hear that...
@@Reviewing_Playing_and_More_RPM I'm taking it back on Monday and demanding a replacement, then I'll attempt to fit it there and then in the store, if it breaks again they will have to replace it again without me having to make another trip back to the store.
@@GoneToHelenBach Yeah, for sure, it should go down without issue, so I'd go so far and taking my motherboard and thermal paste and have them install it to make sure...that way if it breaks it all on them for certain...All the best...
@@Reviewing_Playing_and_More_RPM Yeah, if they will agree to fitting it for me, then I'll happily let them do it so it puts the onus fully on them if it breaks.
I still can't quite believe that I've spent more on my PC build this time around, with the intention of getting higher up the PC 'food chain' than I did last time, yet I'm sat here typing this out on the PC that I built more than six years ago because a new component broke.
@@GoneToHelenBach Yeah, it's not good when parts fail us, it's the first time I've heard of this happening, sorry it had to be you, let me know how things go, take care...
oh man I was panicking with the thermal paste, thanks you're more detailed and closer in camera shot which is good for first builders
Glad you liked it...Thanks...
Hey. 🙂 So your name is Dennis? Ok. I feel like I know you a little better now. Interesting video, sir. See if I can learn a little about computers.
Yeah didn't have time to do as much as I like to in this one, usually do the Temperatures and run some benchmarks guess that'll be another video lol...Thanks for checking it out...
Looks like a fantastic Cooler. Nice work.
It is and the CPU is awesome...Thanks...
Thanks man, this tutorial hepled me a lot! My new ryzen 7 2700x is working perfectly!
Very cool...enjoy your new build...Thanks...
Absolute life saver. I was so scared to use a bit of force, but this video made me just go for it. Happily rocking the 7 3700x now 😀
Awesome, great job...enjoy that new processor...have a fantastic day...
Thank you!!! That was very helpful. I just built a PC and was struggling to find how to control the wraith prism RGB. Your video is very comprehensive. I also got to know about the high/low switch.
You're very welcome! Glad it helped...Thanks...
Your tutorial made that installation very easy, I held off from the cpu cooler installation till last as it seemed jarring, but watching the installation process a few times and it was a breeze
Glad it helped...Thanks...
thanks for this video, now I can finally customize the RGB, I didn't know that the rgb cable isn't need it to light up the cooler, interesting!
Yeah, it's much more customize-able this way...Thanks...
Good video. Found out where to put that extra wires in the CPU box. Noticed the rubber by accident feeling around the fan...LOL. So, looked it up and found you!
Thanks.
Always glad to help, take care...
I love your voice. You sound like a gangster from a Scorsese film 😂 but in all seriousness, thanks a lot my friend the video helped out a lot.
lol that's me a gangster hehe...glad the video helped you out, funny thing is I just did an acting part where they played me as a Head of a Mob and with a youngster trying to replace me lol...Have a great day...
i thought i was watching a video with Bubbles from Trailer Park Boys. Thanks for this indepth look at the cooler, does anybody know if this will fit a socket 939 motherboard?
Excellent tutorial! This reminds me back an IT Tech class in college which was my last and final class before I graduated and got my Master's certification of computer system support class of 2009.
wow Dude, I had no idea you were so skilled in computers...Awesome...Thanks for your comments...
@@Reviewing_Playing_and_More_RPM you're welcome. Yeah I T has been my thing since 1995. 25 + years skills.
Very cool...
@@Reviewing_Playing_and_More_RPM yep. My greatest accomplishments ever!
"Don't be afraid, it's not gonna break or anything."
Welp, I proved that wrong lol....😔😔😔🤦♂️ Snapped the lever right off.
It will still work, but not as good a seal, so temps won't be great, you could try again using a pair of pliers and slightly more downward pressure to make it easier, or try to RMA it...sorry yours broke...have a good day...
Thanks bro,. I personally never built a PC till now so this helped me so much.
Glad I could help.
Thanks for the vid. Took 20 mins and gave some headache to install that fan but done successfully thanks to your tips.
Awesome, great job...Thanks...
Thanks a lot that helped me building my pc .. straight forward and great . Thanks again .
Your very welcome, happy to have helped...
the hardest part is getting that metal holes in like it took a long time to get it to go in so I can flip the switch
Ok, well glad you got everything done...Thanks...
Thank you watched many videos on this before it came and no one explained it like you did I thought I was going to brake it
Glad it helped you out...Thanks...
What a high quality review. Props. Just subscribed, you deserve it.
Appreciate the comment, Thanks very much...
I was trying to figure out what I was doing wrong since couldn't control the RGB, this solved it I think, thanks for the video!
Glad I could help! Thanks...
@@Reviewing_Playing_and_More_RPM After I was able to crack open my case I gotta changed "this solved it I think" to "this solved it. period." thanks again.
Thank you, the only tutorial video that worked :) Im talking about RGB Fan/Control Software.
Stay safe!
Glad you liked it...Thanks...
Excellent video as always, cheers!
Thanks really appreciate your support...Have an amazing day...
Will it work with msi a320m pro e, i dont have a rgb header, do i need one or can i control it with the software? And why did you plug it in the usb slot ?
Your MB from what I know of it will only work with the 2000 Series CPU's, not sure if there was an update for the 3000 series, you have to do some searching as it doesn't seem so...as for not have a RGB Header, as mentioned in the video I don't use the RGB Cable I only use the USB cable, and the Wraith Prism Software to control the colors...Hope that helps a little...Thanks...
Amazing job man, hope you good luck on your channel
Much appreciated, thanks very much...
This will sound dumb, but when I opened mine I was worried about the part that (to me) seemed loose that you discussed at 1:50. Thanks for the vid! I'm not the most knowledgeable on hardware and all
Glad you liked it, much appreciated...when I started a couple years ago, I had a lot to learn as well, it's hard to keep up with all the different changes...Thanks...
Your video helped me a lot with the securing lever. Thanks!
Your very welcome...Thanks...
Thanks so much. I was having trouble installing my wraith, but this really helped
Glad to hear it! Thanks...
Brilliant u helped me alot with new cpu install they really need to explain more in the instructions doesn't even mention the fan speeds
So happy I was able to help. Appreciate you letting me know.
Working on my first build and this was super helpful thank you so much!!!
No problem, glad it helped...Thanks...
A really helpful tutorial for new-comers, good job!
Glad you liked it, appreciate the comment...have a great day...Thanks...
Thanks a lot for the help. I had a nzxt m22 kraken that kinda just gave out on me so i installed the cooler from the cpu. Worked wonders for me.
Glad it helped.
Wow im amazed. I should find this channel sooner. Thanks for info.
Glad you enjoy it! Thanks...
This helped a lot when I was upgrading my prebuilt.
Glad it helped...Thanks...
Thx for the comment on the lever, help me a lot
Any time! Glad it helped...Thanks...
Than you so much, I was tottaly worry to break it but you helped me a lot
Your very welcome...
So well explained! Helped me a lot! Thank you very much!
You're very welcome! Glad it helped...
Nice Video, i really like the wraith prism fan
Yeah it's cool how they made it so the 3 separate colors can be controlled individually...Thanks...
Hope this helps me in my new build in a few days! Super excited ( and anxious ) :/
You can do it! Just take your time and it'll be gtg...Have fun with it...
thats a beauty - but im still amazed microcenter sells the ryzen 5 1600 for $80!!!
Yeah there are some great prices out there now, the R7 2700 was on for $189 recently...All great CPU's...Thanks...
I bought that there I couldn’t believe the deal either 😂
Thank you very much, very nice pleasing video. Thanks. Helped me install my new beautiful CPU :)
You're very welcome! Enjoy your new system...
Informative video, thanks. I installed two of these around 3-4 years ago on top of the 3700x (2 systems). Now I'm wondering about upgrading to a 5950x and keeping the Prism as my cooler.
Glad you enjoyed it. The 5950X is an amazing CPU for sure. Or the 5800X3D as well.
thanks for ur help as am upgrading from a 1600x
Glad I could help! Have fun with your upgrade.
This video was a great help! Thanks!! 😁
You are very welcome! Happy it helped...
Thanks for sharing awesome video, very helpful 😊👍 Happy Friday
You have a great Friday as well...Thanks...
Thank you for the details, it was helpful.
You're very welcome! Have a great day...
Thanks for the video. Very helpful.
Any time, glad it was helpful...Thanks...
The retention handle snapped off as soon as I lifted it lol. RIP
wow, that's harsh...RMA it or take it back to the computer shop you bought it at and get them to re-install the new one for you...take care...
Ehhh, I'm just getting an AIO :'D
Sounds good, I'll be replacing mine down the road as well, hard part is deciding which one for sure...Thanks...
Gosh this was really helpful! I was wondering why my cpu cooler could not access/ connect to the cooler master software and then i saw that i was missing the usb cable... thanks for the vid :)
Glad I could help! Thanks...
Thank you for the video. The manual with the cpu explains nothing of what the usb or rgb cables do. I got it now thanks to your vid
Glad it helped you out...Thanks...
Hi there. Love your dedication for this channel. I have a question, if I just plug in the pwm header for the fan, can I use the mobo software as a rgb controller? Or should I connect the USB or motherboard cables to the cooler? Thanks.
The PWM Fan for the CPU Cooler if that's what you mean then no, it will only control the Fan on the CPU Cooler, the USB cable with the Wraith Prism Software will let you control the CPU Cooler colors, the Motherboard software will do all the other RGB in your system...there might be a way to do it otherwise but not sure how as it seems to be something that doesn't work for most...wish I could offer more...but hope that helps some...
Thanks for making the video dude : )
No Problem, glad you liked it, working on the follow up to it now, to show the Temps, etc...and if time permits some Benchmarks...Thanks...
great video man!
Glad you liked it! Thanks
Another way to put an AMD correctly into the socket is, if you haven't noticed yet, is that the word "Ryzen" is always upside down if you look from the memory slots.
Yeah it's something I look for now, good point though...
Very cool review Dennis.
Thanks Bob...
@@Reviewing_Playing_and_More_RPM You're welcome Dennis
This was really helpful, thanks!
No problem! Thank you...
excellent, came here to see if I needed those LED / USB cables and had a preview of how all that would fit in the motherboard before doing anything. What else could I ask for? Thanks for your time filming this :-)
Your very welcome, glad you liked it...Thanks...
Excellent tutorial - thanks!
You're very welcome!
6:22 for those that cant figure out the dang arm lock on the cooler, thank you!
Appreciated...Thanks...
Mike Payne Thank you so much.
Thanks for your video. BTW - You sound exactly like Wally Cox (aka the voice of Underdog)!!
lol, I used to watch that when I was growing up, really liked that character, don't think I sound like him though but ok...
Fun Merry Christmas Eve Dennis thank you for sharing your knowledge with us taking us along ice playlist keep up the great work God bless you, keep an eye on your watch time 5 for your friend Ken, God bless you!!
Happy holidays!
Hi nice video and tutorial, explained everything beautifully. One question for the usb cable. I want to use the rgb cable so i can sync with aura sync. Would I lose too much if I don’t use the usb? Thanks!
I wasn't able to get my Motherboard Software to work with the RGB Cable, but you can give it a try and if it doesn't work, then you can go ahead and use it the USB way with the Wraith Prism Software...If it works you will have the same functionality and won't be missing anything...Thanks...
Just finally latched mine after months 🙏
Yeah, I had a previous system that I didn't latched either, but we live and learn lol...have a great day...
Very helpful thank you Dennis!
Your very Welcome, Have a Happy New Year...Thanks...
that was educative. thank you sir!
Your very welcome...Thanks...
That was very helpful! Thank you!
Glad you liked it...Thanks...
nice and very helpful video. thank you
You are most welcome...Thanks...
No CPU thermal paste? Very informative video for people doing their first build though. Gets a like from me :)
Yeah it's nice when the Thermal Paste is pre-applied it saves a step in the process, definitely good for first time builders...you have a great day...
@@Reviewing_Playing_and_More_RPM Yup. I just did a build for my GF's daughter based on the 3700x. Thermal paste was already there. Saved me a step.
@@ChaoticAtmosphere Cool, great to have a build complete, now to enjoy...take care...
I think it's really weird that you edited out the part where you dropped the CPU into the socket. Why did you do that?
The camera kept going out of focus for some reason, but it was just a short time so I took it out, it still shows the CPU going in, so not sure why it matters but there's your answer...Thanks...
very helpful video. thank you sir.
Your very welcome...Thanks...
Hi great video if you don’t use the usb does this mean it will still light up raindoe but just won’t have control ??? Or do you need the usb for it to light up ? Thanks :)
If you don't use the USB you won't have control of the colors, but you will have the default colors...with the USB you can control all the colors individually using the Wraith Prism Software...Thanks...
Cool! tks man! My only doubt is about the memory modules. I have a exactly motherboard like yours, and I will build my pc this week. Should I install the dimm modules before or after install the Wraith Prism Cooler? Tks for the tip.
I typically put the Memory in after installing my CPU and CPU Cooler, there is lots of clearance after the CPU Cooler is on, so there won't be any issue's...
@@Reviewing_Playing_and_More_RPM Tks man! Your guide was very helpful for me. ;-)
@@MarceloSantosSCS Great to hear...Thanks...
Great video!
Glad you enjoyed it...Thanks...
Great vid 👍 you earned my sub 🤓
Much appreciated...Thanks...
Is there a reason that you didn't use any cooling paste between CPU and cooler?
It came pre-applied with Thermal Paste, as I stated at 1:12 in the video...