Milwaukee copper pipe cutter 15mm 22mm 28mm long term review

Поделиться
HTML-код
  • Опубликовано: 14 окт 2024
  • Check out my new video • HOW TO MOVE A RADIATOR...
    Milwaukee right guys so today we have our Milwaukee copper pipe cutter electric pipe cutter so this is 12 volt so you can use this with all your other 12 volt Milwaukee stuff so i have had this for a while now and i said i would do a review of it so i have used a couple of these as i have a bad hand and i wanted something i could use to make it a bit easier , first of all i am going to give you an honest review and what i think of it , so first of all how they work is press the button and it spins and press it back that way and it will go to the start then we can cut again for 15mm you can put it on like that you have to be very careful how you get it in on 15mm and then you can cut it personally for 15mm I don't think its great however when you get to 22mm and you cut with 22 its quite good but when you get to 28 mm pipe its really good amazing , really good for stripping out old cylinder cuboards etc 22mm its ok 15mm its not great , so there you go your Milwaukee pipe cutters hope this helped

Комментарии • 43

  • @timgore887
    @timgore887 9 месяцев назад

    Thanks Allen, wish I'd watched this before buying it! As a kitchen/bathroom man I don't often do much 22/28, and I've probably had about a 10% success rate getting it to cut 15mm since I bought it this morning. Weighing up whether to keep it in the cupboard to bring out when I have a load of 22mm to do, or take it back saying its faulty/not fit for purpose since I don't think it's a reliable tool for 15mm. Will stick to my rotary cutter!

    • @skinnzthedon
      @skinnzthedon 8 месяцев назад

      I had the same issue at first cutting 15mm. Then I got used to it. Mine jumps a bit sometimes. I think I need to change the blade beacuse it's take a bit longer to cut.

  • @jimmyjohnston-wx3is
    @jimmyjohnston-wx3is Год назад

    Had mine about 2 yrs never been able to make 1 15mm cut, but 22/28 it’s great

  • @charlescho
    @charlescho 3 года назад

    I just got mine today. Mine came with a big blow mold case but I don’t think I’m gonna use it. How do you store yours?

  • @apremji75
    @apremji75 5 лет назад

    Hey Alan have you changed the wheel yet? You are right 15mm you need have it perfectly aligned but great tool for 22/28mm.

  • @milkman100001
    @milkman100001 2 года назад

    thanks allen ,thinking of getting one as my hands are giving up too

  • @connordeans7589
    @connordeans7589 4 года назад +2

    Are there blades for stainless steel for this cutter?

    • @AllenHart999
      @AllenHart999  4 года назад +1

      I do not know about that. Sorry.

  • @rajkumarsiva779
    @rajkumarsiva779 6 лет назад +2

    can this cut SS tube, what happens if this is used to cut SS tube

  • @cemaydin3819
    @cemaydin3819 6 лет назад +1

    what about water penetration, any issues? Still going strong.????

    • @AllenHart999
      @AllenHart999  6 лет назад

      It is still going but needs a new blade, gone back to normal pipe slice tbh.

    • @AllenHart999
      @AllenHart999  6 лет назад

      I have used them lots of times around water, Water splashing on them etc etc and they seem to work fine. Thanks for watching.

    • @MartynDuerden
      @MartynDuerden 6 лет назад

      What do you use for 35 / 42?

  • @GamerLAD88
    @GamerLAD88 4 года назад +2

    Just picked one up, not impressed at all.
    Taking 9 seconds to cut 15mm copper.
    Reckon it needs taking back and changing?

    • @AllenHart999
      @AllenHart999  4 года назад +1

      😂😂😂

    • @andrewrodriguez8492
      @andrewrodriguez8492 3 года назад +1

      9 SECONDS? IT TAKES LESS THAN 4

    • @GamerLAD88
      @GamerLAD88 3 года назад

      @@andrewrodriguez8492 I took it back for a replacement which worked much better
      Think I had a faulty unit which was spinning slower

  • @Sash_Window
    @Sash_Window 8 лет назад +5

    Got two of these, great tools, just watch your fingers in them! >.

    • @AllenHart999
      @AllenHart999  6 лет назад +1

      totally agree, be careful. Thanks for watching.

  • @BriaCroTex
    @BriaCroTex 5 лет назад

    What's different then 2471-20?

    • @charlescho
      @charlescho 3 года назад

      “-20” suffix usually means tool only.

  • @dannyboy9254
    @dannyboy9254 5 лет назад +2

    I wish it was not a Milwaukee. does rigid sells something like this?

    • @AllenHart999
      @AllenHart999  5 лет назад +1

      I do not mind the Milwaukee stuff tbh. Thanks for watching.

    • @Sash_Window
      @Sash_Window 4 года назад

      @Supa Trending Daily You wait until you catch your pinky finger in one.

    • @vistron888
      @vistron888 4 года назад

      If you're worrying about brand reliability, Ridgid and Milwaukee are owned by the same parent company. Personally I think it's overkill and I prefer the accuracy of a hand cutter. But each to their own.

    • @engjds
      @engjds 2 года назад

      @@Sash_Window You would have to be be pretty stupid to get a digit caught in those jaws.

  • @SUDHIRSINGH-pr8tv
    @SUDHIRSINGH-pr8tv 5 лет назад

    can i cut 1/4" & 3/16" copper tube

  • @user.Sergey
    @user.Sergey 7 лет назад +1

    3/8" режет?

  • @user-tr7xo2vx9p
    @user-tr7xo2vx9p 5 лет назад +1

    You have good potential for tool reviews. Please spend more time on punctuation as it is very difficult to read your description.

    • @AllenHart999
      @AllenHart999  5 лет назад +1

      Have a look at some of my newer videos and see what you think. Thanks.

  • @nitingunjal586
    @nitingunjal586 4 года назад

    I want perches, plz send me shop

  • @nick2580
    @nick2580 Год назад +1

    Yeah coz if not it damages your pipe! I’d save your money I’ve had this over 2 years and I bet the time and money wasted on damage pipe it’s cost me double!! Don’t get me wrong I use it daily but when you need a precise cut and it jumps damaging your workpiece I want to go slap the designer!! 😡

  • @H9550-i7l
    @H9550-i7l 3 года назад +1

    Wtf is mill

    • @AllenHart999
      @AllenHart999  3 года назад +1

      Thanks very much for your comment, please consider subscribing to support the channel 🙂

  • @desdiamond5700
    @desdiamond5700 7 лет назад

    how lazier can plumbers get!

    • @daveroy1066
      @daveroy1066 7 лет назад +8

      +Des Diamond 1 or 2 cuts and your comment may make sense. Try doing 100 plus cuts and see how your hands feel though. Older plumbers may have arthritis and this would be a godsend. Time is money and this is fast.

    • @AllenHart999
      @AllenHart999  6 лет назад +3

      i have a bad hand and this helps, Thanks for watching.

    • @pointedspider
      @pointedspider 4 года назад

      @@AllenHart999 I bought one that reason