I did that exact same thing to a 10mm socket when I lost my special tool for the ground posts about a year ago, actually used the same socket today when I was doing a valve cover.
I’m glad that you’re replacing everything but remember every time you replace something you should start the vehicle make sure it runs right and that you didn’t mess anything up while you were replacing that item now you may start the car up seven misfire water leaking oil leaking and you don’t know where it’s at because you’ve done everything before you started the car back up First thing in maintenance always make sure you fix the problem you’re fixing this case you’re just changing stuff but you could be creating a problem and don’t know sometimes if it ain’t broke, don’t fuck with it!
Next time put socket on bolt first then use that little space that’s left on the top of the socket add an extension to it and unbolt. Love n54s I own 2 335is manual and dct.
Sooo about the FCP lifetime replacement I buy from them a lot. Recently they changed the warranty instead of a refund when returning the used part you now get store credit making a bit difficult to get the same part without paying ever again. Essentially you would need to return it twice and that second replacement you get it for free barring you don’t use the store credit on anything else.
You should get an aluminum valve cover from vargas the oem one can warp fairly easily when I had mine it got real hot in the summer and started to warp on the front and caused some problems getting it off
Damn dude, those valves were really bad. I took mine off today owning owning the bmw for 5 years and had almost no build up. Maybe a previous owner wasn’t changing oil enough
Sorry but Elring isnt oem, its not the same thing, Mahle are the OEM for BMW cam covers. Itll probably be ok, however the Elring gaskets are abit shit.
my man danny killing it‼️ but danny my only question is why you keep wearing gloves when they always rip 😂 i'll see you go 80% of a video with 2 ripped gloves serving absolutely no purpose 😅
Yo Danny , I wanna do donuts in my 370z and I seen your video with you doing donuts for first time in your z , I live in south Florida where's that spot at
It’s a good day when Danny uploads 🔥🔥🔥
I did that exact same thing to a 10mm socket when I lost my special tool for the ground posts about a year ago, actually used the same socket today when I was doing a valve cover.
i suggest you buying index 12 injectors and low pressure fuel pump. if u plan on pushing power that would be a requirement on these n54 motors
The whole video was mixed emotions haha but definitely worth watching 😂🙌🏼
Glad you enjoyed!
Literally checked the channel yesterday saying hmmm no video just gotta wait and boom fire video drops today 🔥🔥🔥
You already know!🙏
I’m glad that you’re replacing everything but remember every time you replace something you should start the vehicle make sure it runs right and that you didn’t mess anything up while you were replacing that item now you may start the car up seven misfire water leaking oil leaking and you don’t know where it’s at because you’ve done everything before you started the car back up First thing in maintenance always make sure you fix the problem you’re fixing this case you’re just changing stuff but you could be creating a problem and don’t know sometimes if it ain’t broke, don’t fuck with it!
Next time put socket on bolt first then use that little space that’s left on the top of the socket add an extension to it and unbolt. Love n54s I own 2 335is manual and dct.
Sooo about the FCP lifetime replacement I buy from them a lot. Recently they changed the warranty instead of a refund when returning the used part you now get store credit making a bit difficult to get the same part without paying ever again. Essentially you would need to return it twice and that second replacement you get it for free barring you don’t use the store credit on anything else.
Like how u explain everything , good stuff man 🔥
Appreciate it!
DANNY Z Back at it again 🔥🔥❤️🔥
Crank shaft guard is a good idea if any of the belts rip they get sucked into the crank shaft and can destroy your whole motor. Cover is only 80 bucks
Put the socket on the blot they the extension it goin to barely hold but it only torque to 8nm
AAAND ITS LIVE🎉🎉🎉❤
Can’t wait for the rest of this series
Glad to see this went as smoothly as possible lol
Hehe
You should get an aluminum valve cover from vargas the oem one can warp fairly easily when I had mine it got real hot in the summer and started to warp on the front and caused some problems getting it off
From Texas. Fake news. Mine is single turbo hood exit. OEM is actually the best. 2 YEARS no issue. I will say they just look better.
@@luluhus1 it’s not fake news it just means it never happened to you cause it did to me
Keep up the great work 👍
Thanks Rifter!
I have g37 coupe right now definitely interested in this build cuz 335i is my nxt ride
Traded my 3v for a 335i excited for my build as well🤙
That rubber is from the spark plug install tool, last guy left it in there.
F8X are my favorite idc but the new G8X are growing on me more and more
Love ur energy bro always a joy watching your content ❤
Thank you so much 😀
Can’t wait for the finish
Damn dude, those valves were really bad. I took mine off today owning owning the bmw for 5 years and had almost no build up. Maybe a previous owner wasn’t changing oil enough
Go to autozone and get a valve cleaner or Lucas oil fuel treatment
Those look like oem spark plugs that came with the car. They definitely haven’t been changed out for quite a while probably it’s whole life crazy
Oh wow!
you should deff get crank seal guard my motor grenaded because i didn’t have it
"it may have down pipes with a small tune" 😭😭😭
Let’s get it!!
Lesssgoooo!!
Rip Bimmer btw 😂
Sorry but Elring isnt oem, its not the same thing, Mahle are the OEM for BMW cam covers. Itll probably be ok, however the Elring gaskets are abit shit.
Rip beamer my guy, i got a n55 135i. im the happiest and the most scared ive been in my entire life
BRO MY CHEAP BMW shakes asf when i drive over 80kmh what could be the problem?
Man watching this is giving nightmares cuz I have to do the oil pan gasket on my 2000 Z3 Roadster... If u love puzzles buy a bimmer 😭😂
Been daily driving my stock turbos stage2+ xHP stage 3 for a whole year… it’s not that unreliable lol
i was going for a 335i manual or a 370z/g37 coupe idk which one id like more lmao
You’ll Most Likely Like The 335i More. But The 370z/g37 Will Last Longer. Just Pick Your Poison Bro 🙏🏽
bmws.... you can never kill them.
Bro first time watching and it was funny AF especially the resolution thing 😂. Also love the beamer content
I just bought a 350z and guess what cylinder 6 striped 😂😂 I feel ya heavy on this ome
oh God 😭
Remove fuel rail much easier
Once a again another banger
🫶🫶🫶
Bro how do you know so much about fixing cars? I can't even change my own blinker fluid.
I can help you with that!
Lol so many emotions 😂🤣
ur cars is my dreams 😂❤️❤️
🥹❤️
i could neva
Danny you look good in an M4 bro you need one i can see it in your eyes
😈😈
More vids
Rip bimmer 😭😂
Haha dude, I have a laser engraver, let’s engrave a BMW logo on it ez! 😅
they'll never know! HAHA
yea your right lets do it
rip bimmer 😂
Rip bummer 😂☠️
Lol now vqs guys wanna going the bimmer gang 🤔
RIP bimmer😂
Ayyee BrianF82
Even after you do all the work the car ain't gonna be worth 20 thousand. I say about 12 maybe 15 if you catch someone that really wants it.
Rip bimmer 😂
my man danny killing it‼️ but danny my only question is why you keep wearing gloves when they always rip 😂 i'll see you go 80% of a video with 2 ripped gloves serving absolutely no purpose 😅
This genuinely made me laugh
@@DannyZee venom steel makes the most durable gloves i have tried them all
rip bimmer
🔥🔥🔥
Rip bimmer I miss my n54 when I’m done with my e90 LS swap project I’m buying another n54 535 #N54Tingz
Yo Danny , I wanna do donuts in my 370z and I seen your video with you doing donuts for first time in your z , I live in south Florida where's that spot at
Rip bimmer
I WONDER IF YOU KNOWWWW
Rippp bimmer
Rip bimmer n54 trash
Walnut blast that bad boy
Hit up Bayoptiks for new headlights. I heard great things from them.
Rip bimmer
Rip bimmer
Rip bimmer